1 /* 2 * (C) Copyright 2013 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * based on P1022DS.h 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_36BIT 30 #define CONFIG_PHYS_64BIT 31 #endif 32 33 #ifdef CONFIG_SDCARD 34 #define CONFIG_RAMBOOT_SDCARD 35 #endif 36 37 #ifdef CONFIG_SPIFLASH 38 #define CONFIG_RAMBOOT_SPIFLASH 39 #endif 40 41 /* High Level Configuration Options */ 42 #define CONFIG_BOOKE /* BOOKE */ 43 #define CONFIG_E500 /* BOOKE e500 family */ 44 #define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ 45 #define CONFIG_P1022 46 #define CONFIG_CONTROLCENTERD 47 #define CONFIG_MP /* support multiple processors */ 48 49 #define CONFIG_SYS_NO_FLASH 50 #define CONFIG_ENABLE_36BIT_PHYS 51 #define CONFIG_FSL_LAW /* Use common FSL init code */ 52 53 #ifdef CONFIG_TRAILBLAZER 54 #define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01" 55 #else 56 #define CONFIG_IDENT_STRING " controlcenterd 0.01" 57 #endif 58 59 #ifdef CONFIG_PHYS_64BIT 60 #define CONFIG_ADDR_MAP 61 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 62 #endif 63 64 #define CONFIG_L2_CACHE 65 #define CONFIG_BTB 66 67 #define CONFIG_SYS_CLK_FREQ 66666600 68 #define CONFIG_DDR_CLK_FREQ 66666600 69 70 #define CONFIG_SYS_RAMBOOT 71 72 #ifdef CONFIG_TRAILBLAZER 73 74 #define CONFIG_SYS_TEXT_BASE 0xf8fc0000 75 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 76 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 77 78 /* 79 * Config the L2 Cache 80 */ 81 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 82 #ifdef CONFIG_PHYS_64BIT 83 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull 84 #else 85 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 86 #endif 87 #define CONFIG_SYS_L2_SIZE (256 << 10) 88 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 89 90 #else /* CONFIG_TRAILBLAZER */ 91 92 #define CONFIG_SYS_TEXT_BASE 0x11000000 93 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 94 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 95 96 #endif /* CONFIG_TRAILBLAZER */ 97 98 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 99 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 100 101 102 /* 103 * Memory map 104 * 105 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable 106 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable 107 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 108 * 109 * Localbus non-cacheable 110 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable 111 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable 112 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 113 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 114 */ 115 116 #define CONFIG_SYS_INIT_RAM_LOCK 117 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 118 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ 119 #define CONFIG_SYS_GBL_DATA_OFFSET \ 120 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 121 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 122 123 #ifdef CONFIG_TRAILBLAZER 124 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ 125 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 126 #else 127 #define CONFIG_SYS_CCSRBAR 0xffe00000 128 #endif 129 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 130 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) 131 132 /* 133 * DDR Setup 134 */ 135 136 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 137 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 138 #define CONFIG_SYS_SDRAM_SIZE 1024 139 #define CONFIG_VERY_BIG_RAM 140 141 #define CONFIG_FSL_DDR3 142 #define CONFIG_NUM_DDR_CONTROLLERS 1 143 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 144 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 145 146 #define CONFIG_SYS_MEMTEST_START 0x00000000 147 #define CONFIG_SYS_MEMTEST_END 0x3fffffff 148 149 #ifdef CONFIG_TRAILBLAZER 150 #define CONFIG_SPD_EEPROM 151 #define SPD_EEPROM_ADDRESS 0x52 152 /*#define CONFIG_FSL_DDR_INTERACTIVE*/ 153 #endif 154 155 /* 156 * Local Bus Definitions 157 */ 158 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 159 160 #define CONFIG_SYS_ELBC_BASE 0xe0000000 161 #ifdef CONFIG_PHYS_64BIT 162 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull 163 #else 164 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE 165 #endif 166 167 #define CONFIG_UART_BR_PRELIM \ 168 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) 169 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) 170 171 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ 172 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ 173 174 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM 175 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM 176 177 /* 178 * Serial Port 179 */ 180 #define CONFIG_CONS_INDEX 2 181 #define CONFIG_SYS_NS16550 182 #define CONFIG_SYS_NS16550_SERIAL 183 #define CONFIG_SYS_NS16550_REG_SIZE 1 184 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 185 186 #define CONFIG_SYS_BAUDRATE_TABLE \ 187 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 188 189 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 190 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 191 192 /* 193 * I2C 194 */ 195 #define CONFIG_SYS_I2C 196 #define CONFIG_SYS_I2C_FSL 197 #define CONFIG_SYS_FSL_I2C_SPEED 400000 198 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 199 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 200 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 201 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 202 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 203 /* Probing DP501 I2C-Bridge will hang */ 204 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x30}, {0, 0x37}, {0, 0x3a}, \ 205 {0, 0x3b}, {0, 0x50} } 206 207 #define CONFIG_PCA9698 /* NXP PCA9698 */ 208 209 #define CONFIG_CMD_EEPROM 210 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 211 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 212 213 #ifndef CONFIG_TRAILBLAZER 214 /* 215 * eSPI - Enhanced SPI 216 */ 217 #define CONFIG_HARD_SPI 218 #define CONFIG_FSL_ESPI 219 220 #define CONFIG_SPI_FLASH 221 #define CONFIG_SPI_FLASH_STMICRO 222 223 #define CONFIG_CMD_SF 224 #define CONFIG_SF_DEFAULT_SPEED 10000000 225 #define CONFIG_SF_DEFAULT_MODE 0 226 #endif 227 228 /* 229 * TPM 230 */ 231 #define CONFIG_TPM_ATMEL_TWI 232 #define CONFIG_TPM 233 #define CONFIG_TPM_AUTH_SESSIONS 234 #define CONFIG_SHA1 235 #define CONFIG_CMD_TPM 236 237 /* 238 * MMC 239 */ 240 #define CONFIG_MMC 241 #define CONFIG_GENERIC_MMC 242 #define CONFIG_CMD_MMC 243 244 #define CONFIG_FSL_ESDHC 245 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 246 247 248 #ifndef CONFIG_TRAILBLAZER 249 250 /* 251 * Video 252 */ 253 #define CONFIG_FSL_DIU_FB 254 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 255 #define CONFIG_VIDEO 256 #define CONFIG_CFB_CONSOLE 257 #define CONFIG_VGA_AS_SINGLE_DEVICE 258 #define CONFIG_CMD_BMP 259 260 /* 261 * General PCI 262 * Memory space is mapped 1-1, but I/O space must start from 0. 263 */ 264 #define CONFIG_PCI /* Enable PCI/PCIE */ 265 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 266 #define CONFIG_PCI_INDIRECT_BRIDGE 267 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 268 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 269 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 270 #define CONFIG_CMD_PCI 271 272 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 273 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 274 275 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 276 #ifdef CONFIG_PHYS_64BIT 277 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 278 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 279 #else 280 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 281 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 282 #endif 283 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 284 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 285 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 286 #ifdef CONFIG_PHYS_64BIT 287 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 288 #else 289 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 290 #endif 291 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 292 293 /* 294 * SATA 295 */ 296 #define CONFIG_LIBATA 297 #define CONFIG_LBA48 298 #define CONFIG_CMD_SATA 299 300 #define CONFIG_FSL_SATA 301 #define CONFIG_SYS_SATA_MAX_DEVICE 2 302 #define CONFIG_SATA1 303 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 304 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 305 #define CONFIG_SATA2 306 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 307 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 308 309 /* 310 * Ethernet 311 */ 312 #define CONFIG_TSEC_ENET 313 314 #define CONFIG_TSECV2 315 316 #define CONFIG_MII /* MII PHY management */ 317 #define CONFIG_TSEC1 1 318 #define CONFIG_TSEC1_NAME "eTSEC1" 319 #define CONFIG_TSEC2 1 320 #define CONFIG_TSEC2_NAME "eTSEC2" 321 322 #define TSEC1_PHY_ADDR 0 323 #define TSEC2_PHY_ADDR 1 324 325 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 326 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 327 328 #define TSEC1_PHYIDX 0 329 #define TSEC2_PHYIDX 0 330 331 #define CONFIG_ETHPRIME "eTSEC1" 332 333 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 334 335 /* 336 * USB 337 */ 338 #define CONFIG_USB_EHCI 339 #define CONFIG_CMD_USB 340 #define CONFIG_USB_STORAGE 341 342 #define CONFIG_HAS_FSL_DR_USB 343 #define CONFIG_USB_EHCI_FSL 344 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 345 346 #endif /* CONFIG_TRAILBLAZER */ 347 348 /* 349 * Environment 350 */ 351 #if defined(CONFIG_TRAILBLAZER) 352 #define CONFIG_ENV_IS_NOWHERE 353 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 354 #undef CONFIG_CMD_SAVEENV 355 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 356 #define CONFIG_ENV_IS_IN_SPI_FLASH 357 #define CONFIG_ENV_SPI_BUS 0 358 #define CONFIG_ENV_SPI_CS 0 359 #define CONFIG_ENV_SPI_MAX_HZ 10000000 360 #define CONFIG_ENV_SPI_MODE 0 361 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 362 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 363 #define CONFIG_ENV_SECT_SIZE 0x10000 364 #elif defined(CONFIG_RAMBOOT_SDCARD) 365 #define CONFIG_ENV_IS_IN_MMC 366 #define CONFIG_FSL_FIXED_MMC_LOCATION 367 #define CONFIG_ENV_SIZE 0x2000 368 #define CONFIG_SYS_MMC_ENV_DEV 0 369 #endif 370 371 #define CONFIG_SYS_EXTRA_ENV_RELOC 372 373 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 374 375 /* 376 * Command line configuration. 377 */ 378 #ifndef CONFIG_TRAILBLAZER 379 #define CONFIG_SYS_HUSH_PARSER 380 #define CONFIG_SYS_LONGHELP 381 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 382 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 383 #endif /* CONFIG_TRAILBLAZER */ 384 385 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 386 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 387 #ifdef CONFIG_CMD_KGDB 388 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 389 #else 390 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 391 #endif 392 /* Print Buffer Size */ 393 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 394 #define CONFIG_SYS_MAXARGS 16 395 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 396 397 #include <config_cmd_default.h> 398 399 #ifndef CONFIG_TRAILBLAZER 400 401 #define CONFIG_CMD_ELF 402 #define CONFIG_CMD_ERRATA 403 #define CONFIG_CMD_EXT2 404 #define CONFIG_CMD_FAT 405 #define CONFIG_CMD_IRQ 406 #define CONFIG_CMD_MII 407 #define CONFIG_CMD_NET 408 #define CONFIG_CMD_PING 409 #define CONFIG_CMD_SETEXPR 410 #define CONFIG_CMD_REGINFO 411 412 /* 413 * Board initialisation callbacks 414 */ 415 #define CONFIG_BOARD_EARLY_INIT_F 416 #define CONFIG_BOARD_EARLY_INIT_R 417 #define CONFIG_MISC_INIT_R 418 #define CONFIG_LAST_STAGE_INIT 419 420 /* 421 * Pass open firmware flat tree 422 */ 423 #define CONFIG_OF_LIBFDT 424 #define CONFIG_OF_BOARD_SETUP 425 #define CONFIG_OF_STDOUT_VIA_ALIAS 426 427 /* new uImage format support */ 428 #define CONFIG_FIT 429 #define CONFIG_FIT_VERBOSE 430 431 #else /* CONFIG_TRAILBLAZER */ 432 433 #define CONFIG_BOARD_EARLY_INIT_F 434 #define CONFIG_BOARD_EARLY_INIT_R 435 #define CONFIG_LAST_STAGE_INIT 436 #undef CONFIG_CMD_BOOTM 437 438 #endif /* CONFIG_TRAILBLAZER */ 439 440 /* 441 * Miscellaneous configurable options 442 */ 443 #define CONFIG_SYS_HZ 1000 444 #define CONFIG_HW_WATCHDOG 445 #define CONFIG_LOADS_ECHO 446 #define CONFIG_SYS_LOADS_BAUD_CHANGE 447 #define CONFIG_DOS_PARTITION 448 449 /* 450 * For booting Linux, the board info and command line data 451 * have to be in the first 64 MB of memory, since this is 452 * the maximum mapped by the Linux kernel during initialization. 453 */ 454 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ 455 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 456 457 /* 458 * Environment Configuration 459 */ 460 461 #ifdef CONFIG_TRAILBLAZER 462 463 #define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */ 464 #define CONFIG_BAUDRATE 115200 465 466 #define CONFIG_EXTRA_ENV_SETTINGS \ 467 "mp_holdoff=1\0" 468 469 #else 470 471 #define CONFIG_HOSTNAME controlcenterd 472 #define CONFIG_ROOTPATH "/opt/nfsroot" 473 #define CONFIG_BOOTFILE "uImage" 474 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ 475 476 #define CONFIG_LOADADDR 1000000 477 478 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 479 480 #define CONFIG_BAUDRATE 115200 481 482 #define CONFIG_EXTRA_ENV_SETTINGS \ 483 "netdev=eth0\0" \ 484 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 485 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 486 "tftpflash=tftpboot $loadaddr $uboot && " \ 487 "protect off $ubootaddr +$filesize && " \ 488 "erase $ubootaddr +$filesize && " \ 489 "cp.b $loadaddr $ubootaddr $filesize && " \ 490 "protect on $ubootaddr +$filesize && " \ 491 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 492 "consoledev=ttyS1\0" \ 493 "ramdiskaddr=2000000\0" \ 494 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 495 "fdtaddr=c00000\0" \ 496 "fdtfile=controlcenterd.dtb\0" \ 497 "bdev=sda3\0" 498 499 /* these are used and NUL-terminated in env_default.h */ 500 #define CONFIG_NFSBOOTCOMMAND \ 501 "setenv bootargs root=/dev/nfs rw " \ 502 "nfsroot=$serverip:$rootpath " \ 503 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 504 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 505 "tftp $loadaddr $bootfile;" \ 506 "tftp $fdtaddr $fdtfile;" \ 507 "bootm $loadaddr - $fdtaddr" 508 509 #define CONFIG_RAMBOOTCOMMAND \ 510 "setenv bootargs root=/dev/ram rw " \ 511 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 512 "tftp $ramdiskaddr $ramdiskfile;" \ 513 "tftp $loadaddr $bootfile;" \ 514 "tftp $fdtaddr $fdtfile;" \ 515 "bootm $loadaddr $ramdiskaddr $fdtaddr" 516 517 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 518 519 #endif /* CONFIG_TRAILBLAZER */ 520 521 #endif 522