1 /*
2  * (C) Copyright 2013
3  * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
4  *
5  * based on P1022DS.h
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25 
26 #ifndef __CONFIG_H
27 #define __CONFIG_H
28 
29 #ifdef CONFIG_36BIT
30 #define CONFIG_PHYS_64BIT
31 #endif
32 
33 #ifdef CONFIG_SDCARD
34 #define CONFIG_RAMBOOT_SDCARD
35 #endif
36 
37 #ifdef CONFIG_SPIFLASH
38 #define CONFIG_RAMBOOT_SPIFLASH
39 #endif
40 
41 /* High Level Configuration Options */
42 #define CONFIG_BOOKE			/* BOOKE */
43 #define CONFIG_E500			/* BOOKE e500 family */
44 #define CONFIG_MPC85xx			/* MPC8540/60/55/41/48 */
45 #define CONFIG_P1022
46 #define CONFIG_CONTROLCENTERD
47 #define CONFIG_MP			/* support multiple processors */
48 
49 #define CONFIG_SYS_NO_FLASH
50 #define CONFIG_ENABLE_36BIT_PHYS
51 #define CONFIG_FSL_LAW			/* Use common FSL init code */
52 
53 #ifdef CONFIG_TRAILBLAZER
54 #define CONFIG_IDENT_STRING	" controlcenterd trailblazer 0.01"
55 #else
56 #define CONFIG_IDENT_STRING	" controlcenterd 0.01"
57 #endif
58 
59 #ifdef CONFIG_PHYS_64BIT
60 #define CONFIG_ADDR_MAP
61 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
62 #endif
63 
64 #define CONFIG_L2_CACHE
65 #define CONFIG_BTB
66 
67 #define CONFIG_SYS_CLK_FREQ	66666600
68 #define CONFIG_DDR_CLK_FREQ	66666600
69 
70 #define CONFIG_SYS_RAMBOOT
71 
72 #ifdef CONFIG_TRAILBLAZER
73 
74 #define CONFIG_SYS_TEXT_BASE		0xf8fc0000
75 #define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
76 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
77 
78 /*
79  * Config the L2 Cache
80  */
81 #define CONFIG_SYS_INIT_L2_ADDR		0xf8fc0000
82 #ifdef CONFIG_PHYS_64BIT
83 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	0xff8fc0000ull
84 #else
85 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
86 #endif
87 #define CONFIG_SYS_L2_SIZE		(256 << 10)
88 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
89 
90 #else /* CONFIG_TRAILBLAZER */
91 
92 #define CONFIG_SYS_TEXT_BASE		0x11000000
93 #define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
94 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
95 
96 #endif /* CONFIG_TRAILBLAZER */
97 
98 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
99 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
100 
101 
102 /*
103  * Memory map
104  *
105  * 0x0000_0000	0x3fff_ffff	DDR			1G Cacheable
106  * 0xc000_0000	0xdfff_ffff	PCI Express Mem		512M non-cacheable
107  * 0xffc0_0000	0xffc2_ffff	PCI IO range		192K non-cacheable
108  *
109  * Localbus non-cacheable
110  * 0xe000_0000	0xe00f_ffff	eLBC			1M non-cacheable
111  * 0xf8fc0000	0xf8ff_ffff	L2 SRAM			256k Cacheable
112  * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
113  * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
114  */
115 
116 #define CONFIG_SYS_INIT_RAM_LOCK
117 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* Initial L1 address */
118 #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000 /* used area in RAM */
119 #define CONFIG_SYS_GBL_DATA_OFFSET	\
120 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
121 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
122 
123 #ifdef CONFIG_TRAILBLAZER
124 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */
125 #define CONFIG_SYS_CCSRBAR		CONFIG_SYS_CCSRBAR_DEFAULT
126 #else
127 #define CONFIG_SYS_CCSRBAR		0xffe00000
128 #endif
129 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
130 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR	(CONFIG_SYS_CCSRBAR+0xf200)
131 
132 /*
133  * DDR Setup
134  */
135 
136 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
137 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
138 #define CONFIG_SYS_SDRAM_SIZE 1024
139 #define CONFIG_VERY_BIG_RAM
140 
141 #define CONFIG_FSL_DDR3
142 #define CONFIG_NUM_DDR_CONTROLLERS	1
143 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
144 #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
145 
146 #define CONFIG_SYS_MEMTEST_START	0x00000000
147 #define CONFIG_SYS_MEMTEST_END		0x3fffffff
148 
149 #ifdef CONFIG_TRAILBLAZER
150 #define CONFIG_SPD_EEPROM
151 #define SPD_EEPROM_ADDRESS 0x52
152 /*#define CONFIG_FSL_DDR_INTERACTIVE*/
153 #endif
154 
155 /*
156  * Local Bus Definitions
157  */
158 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
159 
160 #define CONFIG_SYS_ELBC_BASE		0xe0000000
161 #ifdef CONFIG_PHYS_64BIT
162 #define CONFIG_SYS_ELBC_BASE_PHYS	0xfe0000000ull
163 #else
164 #define CONFIG_SYS_ELBC_BASE_PHYS	CONFIG_SYS_ELBC_BASE
165 #endif
166 
167 #define CONFIG_UART_BR_PRELIM  \
168 	(BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V)
169 #define CONFIG_UART_OR_PRELIM	(OR_AM_32KB | 0xff7)
170 
171 #define CONFIG_SYS_BR0_PRELIM	0 /* CS0 was originally intended for FPGA */
172 #define CONFIG_SYS_OR0_PRELIM	0 /* debugging, was never used */
173 
174 #define CONFIG_SYS_BR1_PRELIM	CONFIG_UART_BR_PRELIM
175 #define CONFIG_SYS_OR1_PRELIM	CONFIG_UART_OR_PRELIM
176 
177 /*
178  * Serial Port
179  */
180 #define CONFIG_CONS_INDEX		2
181 #define CONFIG_SYS_NS16550
182 #define CONFIG_SYS_NS16550_SERIAL
183 #define CONFIG_SYS_NS16550_REG_SIZE	1
184 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
185 
186 #define CONFIG_SYS_BAUDRATE_TABLE	\
187 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
188 
189 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
190 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
191 
192 /*
193  * I2C
194  */
195 #define CONFIG_SYS_I2C
196 #define CONFIG_SYS_I2C_FSL
197 #define CONFIG_SYS_FSL_I2C_SPEED	400000
198 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
199 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
200 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
201 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
202 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
203 /* Probing DP501 I2C-Bridge will hang */
204 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x30}, {0, 0x37}, {0, 0x3a}, \
205 					  {0, 0x3b}, {0, 0x50} }
206 
207 #define CONFIG_PCA9698			/* NXP PCA9698 */
208 
209 #define CONFIG_CMD_EEPROM
210 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
211 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
212 
213 #ifndef CONFIG_TRAILBLAZER
214 /*
215  * eSPI - Enhanced SPI
216  */
217 #define CONFIG_HARD_SPI
218 #define CONFIG_FSL_ESPI
219 
220 #define CONFIG_SPI_FLASH
221 #define CONFIG_SPI_FLASH_STMICRO
222 
223 #define CONFIG_CMD_SF
224 #define CONFIG_SF_DEFAULT_SPEED		10000000
225 #define CONFIG_SF_DEFAULT_MODE		0
226 #endif
227 
228 /*
229  * TPM
230  */
231 #define CONFIG_TPM_ATMEL_TWI
232 #define CONFIG_TPM
233 #define CONFIG_TPM_AUTH_SESSIONS
234 #define CONFIG_SHA1
235 #define CONFIG_CMD_TPM
236 
237 /*
238  * MMC
239  */
240 #define CONFIG_MMC
241 #define CONFIG_GENERIC_MMC
242 #define CONFIG_CMD_MMC
243 
244 #define CONFIG_FSL_ESDHC
245 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
246 
247 
248 #ifndef CONFIG_TRAILBLAZER
249 
250 /*
251  * Video
252  */
253 #define CONFIG_FSL_DIU_FB
254 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
255 #define CONFIG_VIDEO
256 #define CONFIG_CFB_CONSOLE
257 #define CONFIG_VGA_AS_SINGLE_DEVICE
258 #define CONFIG_CMD_BMP
259 
260 /*
261  * General PCI
262  * Memory space is mapped 1-1, but I/O space must start from 0.
263  */
264 #define CONFIG_PCI			/* Enable PCI/PCIE */
265 #define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
266 #define CONFIG_PCI_INDIRECT_BRIDGE
267 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
268 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
269 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
270 #define CONFIG_CMD_PCI
271 
272 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
273 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
274 
275 #define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
276 #ifdef CONFIG_PHYS_64BIT
277 #define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
278 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
279 #else
280 #define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
281 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
282 #endif
283 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
284 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc20000
285 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
286 #ifdef CONFIG_PHYS_64BIT
287 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc20000ull
288 #else
289 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc20000
290 #endif
291 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
292 
293 /*
294  * SATA
295  */
296 #define CONFIG_LIBATA
297 #define CONFIG_LBA48
298 #define CONFIG_CMD_SATA
299 
300 #define CONFIG_FSL_SATA
301 #define CONFIG_SYS_SATA_MAX_DEVICE	2
302 #define CONFIG_SATA1
303 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
304 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
305 #define CONFIG_SATA2
306 #define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
307 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
308 
309 /*
310  * Ethernet
311  */
312 #define CONFIG_TSEC_ENET
313 
314 #define CONFIG_TSECV2
315 
316 #define CONFIG_MII			/* MII PHY management */
317 #define CONFIG_TSEC1		1
318 #define CONFIG_TSEC1_NAME	"eTSEC1"
319 #define CONFIG_TSEC2		1
320 #define CONFIG_TSEC2_NAME	"eTSEC2"
321 
322 #define TSEC1_PHY_ADDR		0
323 #define TSEC2_PHY_ADDR		1
324 
325 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
326 #define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
327 
328 #define TSEC1_PHYIDX		0
329 #define TSEC2_PHYIDX		0
330 
331 #define CONFIG_ETHPRIME		"eTSEC1"
332 
333 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
334 
335 /*
336  * USB
337  */
338 #define CONFIG_USB_EHCI
339 #define CONFIG_CMD_USB
340 #define CONFIG_USB_STORAGE
341 
342 #define CONFIG_HAS_FSL_DR_USB
343 #define CONFIG_USB_EHCI_FSL
344 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
345 
346 #endif /* CONFIG_TRAILBLAZER */
347 
348 /*
349  * Environment
350  */
351 #if defined(CONFIG_TRAILBLAZER)
352 #define CONFIG_ENV_IS_NOWHERE
353 #define CONFIG_ENV_SIZE		0x2000		/* 8KB */
354 #undef CONFIG_CMD_SAVEENV
355 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
356 #define CONFIG_ENV_IS_IN_SPI_FLASH
357 #define CONFIG_ENV_SPI_BUS	0
358 #define CONFIG_ENV_SPI_CS	0
359 #define CONFIG_ENV_SPI_MAX_HZ	10000000
360 #define CONFIG_ENV_SPI_MODE	0
361 #define CONFIG_ENV_SIZE		0x2000		/* 8KB */
362 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
363 #define CONFIG_ENV_SECT_SIZE	0x10000
364 #elif defined(CONFIG_RAMBOOT_SDCARD)
365 #define CONFIG_ENV_IS_IN_MMC
366 #define CONFIG_FSL_FIXED_MMC_LOCATION
367 #define CONFIG_ENV_SIZE		0x2000
368 #define CONFIG_SYS_MMC_ENV_DEV	0
369 #endif
370 
371 #define CONFIG_SYS_EXTRA_ENV_RELOC
372 
373 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
374 
375 /*
376  * Command line configuration.
377  */
378 #ifndef CONFIG_TRAILBLAZER
379 #define CONFIG_SYS_HUSH_PARSER
380 #define CONFIG_SYS_LONGHELP
381 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
382 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
383 #endif /* CONFIG_TRAILBLAZER */
384 
385 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
386 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
387 #ifdef CONFIG_CMD_KGDB
388 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
389 #else
390 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
391 #endif
392 /* Print Buffer Size */
393 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
394 #define CONFIG_SYS_MAXARGS	16
395 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
396 
397 #include <config_cmd_default.h>
398 
399 #ifndef CONFIG_TRAILBLAZER
400 
401 #define CONFIG_CMD_ELF
402 #define CONFIG_CMD_ERRATA
403 #define CONFIG_CMD_EXT2
404 #define CONFIG_CMD_FAT
405 #define CONFIG_CMD_IRQ
406 #define CONFIG_CMD_MII
407 #define CONFIG_CMD_NET
408 #define CONFIG_CMD_PING
409 #define CONFIG_CMD_SETEXPR
410 #define CONFIG_CMD_REGINFO
411 
412 /*
413  * Board initialisation callbacks
414  */
415 #define CONFIG_BOARD_EARLY_INIT_F
416 #define CONFIG_BOARD_EARLY_INIT_R
417 #define CONFIG_MISC_INIT_R
418 #define CONFIG_LAST_STAGE_INIT
419 
420 /*
421  * Pass open firmware flat tree
422  */
423 #define CONFIG_OF_LIBFDT
424 #define CONFIG_OF_BOARD_SETUP
425 #define CONFIG_OF_STDOUT_VIA_ALIAS
426 
427 /* new uImage format support */
428 #define CONFIG_FIT
429 #define CONFIG_FIT_VERBOSE
430 
431 #else /* CONFIG_TRAILBLAZER */
432 
433 #define CONFIG_BOARD_EARLY_INIT_F
434 #define CONFIG_BOARD_EARLY_INIT_R
435 #define CONFIG_LAST_STAGE_INIT
436 #undef CONFIG_CMD_BOOTM
437 
438 #endif /* CONFIG_TRAILBLAZER */
439 
440 /*
441  * Miscellaneous configurable options
442  */
443 #define CONFIG_SYS_HZ		1000
444 #define CONFIG_HW_WATCHDOG
445 #define CONFIG_LOADS_ECHO
446 #define CONFIG_SYS_LOADS_BAUD_CHANGE
447 #define CONFIG_DOS_PARTITION
448 
449 /*
450  * For booting Linux, the board info and command line data
451  * have to be in the first 64 MB of memory, since this is
452  * the maximum mapped by the Linux kernel during initialization.
453  */
454 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Linux Memory map */
455 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
456 
457 /*
458  * Environment Configuration
459  */
460 
461 #ifdef CONFIG_TRAILBLAZER
462 
463 #define CONFIG_BOOTDELAY	0	/* -1 disables auto-boot */
464 #define CONFIG_BAUDRATE	115200
465 
466 #define	CONFIG_EXTRA_ENV_SETTINGS				\
467 	"mp_holdoff=1\0"
468 
469 #else
470 
471 #define CONFIG_HOSTNAME		controlcenterd
472 #define CONFIG_ROOTPATH		"/opt/nfsroot"
473 #define CONFIG_BOOTFILE		"uImage"
474 #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP */
475 
476 #define CONFIG_LOADADDR		1000000
477 
478 #define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
479 
480 #define CONFIG_BAUDRATE	115200
481 
482 #define	CONFIG_EXTRA_ENV_SETTINGS				\
483 	"netdev=eth0\0"						\
484 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
485 	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
486 	"tftpflash=tftpboot $loadaddr $uboot && "		\
487 		"protect off $ubootaddr +$filesize && "		\
488 		"erase $ubootaddr +$filesize && "		\
489 		"cp.b $loadaddr $ubootaddr $filesize && "	\
490 		"protect on $ubootaddr +$filesize && "		\
491 		"cmp.b $loadaddr $ubootaddr $filesize\0"	\
492 	"consoledev=ttyS1\0"					\
493 	"ramdiskaddr=2000000\0"					\
494 	"ramdiskfile=rootfs.ext2.gz.uboot\0"			\
495 	"fdtaddr=c00000\0"					\
496 	"fdtfile=controlcenterd.dtb\0"				\
497 	"bdev=sda3\0"
498 
499 /* these are used and NUL-terminated in env_default.h */
500 #define CONFIG_NFSBOOTCOMMAND						\
501 	"setenv bootargs root=/dev/nfs rw "				\
502 	"nfsroot=$serverip:$rootpath "					\
503 	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
504 	"console=$consoledev,$baudrate $othbootargs $videobootargs;"	\
505 	"tftp $loadaddr $bootfile;"					\
506 	"tftp $fdtaddr $fdtfile;"					\
507 	"bootm $loadaddr - $fdtaddr"
508 
509 #define CONFIG_RAMBOOTCOMMAND						\
510 	"setenv bootargs root=/dev/ram rw "				\
511 	"console=$consoledev,$baudrate $othbootargs $videobootargs;"	\
512 	"tftp $ramdiskaddr $ramdiskfile;"				\
513 	"tftp $loadaddr $bootfile;"					\
514 	"tftp $fdtaddr $fdtfile;"					\
515 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
516 
517 #define CONFIG_BOOTCOMMAND		CONFIG_RAMBOOTCOMMAND
518 
519 #endif /* CONFIG_TRAILBLAZER */
520 
521 #endif
522