1 /* 2 * (C) Copyright 2013 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * based on P1022DS.h 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_36BIT 30 #define CONFIG_PHYS_64BIT 31 #endif 32 33 #ifdef CONFIG_SDCARD 34 #define CONFIG_RAMBOOT_SDCARD 35 #endif 36 37 #ifdef CONFIG_SPIFLASH 38 #define CONFIG_RAMBOOT_SPIFLASH 39 #endif 40 41 /* High Level Configuration Options */ 42 #define CONFIG_BOOKE /* BOOKE */ 43 #define CONFIG_E500 /* BOOKE e500 family */ 44 #define CONFIG_P1022 45 #define CONFIG_CONTROLCENTERD 46 #define CONFIG_MP /* support multiple processors */ 47 48 49 #define CONFIG_SYS_NO_FLASH 50 #define CONFIG_ENABLE_36BIT_PHYS 51 #define CONFIG_FSL_LAW /* Use common FSL init code */ 52 53 #ifdef CONFIG_TRAILBLAZER 54 #define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01" 55 #else 56 #define CONFIG_IDENT_STRING " controlcenterd 0.01" 57 #endif 58 59 #ifdef CONFIG_PHYS_64BIT 60 #define CONFIG_ADDR_MAP 61 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 62 #endif 63 64 #define CONFIG_L2_CACHE 65 #define CONFIG_BTB 66 67 #define CONFIG_SYS_CLK_FREQ 66666600 68 #define CONFIG_DDR_CLK_FREQ 66666600 69 70 #define CONFIG_SYS_RAMBOOT 71 72 #ifdef CONFIG_TRAILBLAZER 73 74 #define CONFIG_SYS_TEXT_BASE 0xf8fc0000 75 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 76 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 77 78 /* 79 * Config the L2 Cache 80 */ 81 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 82 #ifdef CONFIG_PHYS_64BIT 83 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull 84 #else 85 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 86 #endif 87 #define CONFIG_SYS_L2_SIZE (256 << 10) 88 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 89 90 #else /* CONFIG_TRAILBLAZER */ 91 92 #define CONFIG_SYS_TEXT_BASE 0x11000000 93 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 94 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 95 96 #endif /* CONFIG_TRAILBLAZER */ 97 98 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 99 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 100 101 102 /* 103 * Memory map 104 * 105 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable 106 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable 107 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 108 * 109 * Localbus non-cacheable 110 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable 111 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable 112 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 113 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 114 */ 115 116 #define CONFIG_SYS_INIT_RAM_LOCK 117 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 118 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ 119 #define CONFIG_SYS_GBL_DATA_OFFSET \ 120 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 121 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 122 123 #ifdef CONFIG_TRAILBLAZER 124 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ 125 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 126 #else 127 #define CONFIG_SYS_CCSRBAR 0xffe00000 128 #endif 129 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 130 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) 131 132 /* 133 * DDR Setup 134 */ 135 136 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 137 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 138 #define CONFIG_SYS_SDRAM_SIZE 1024 139 #define CONFIG_VERY_BIG_RAM 140 141 #define CONFIG_SYS_FSL_DDR3 142 #define CONFIG_NUM_DDR_CONTROLLERS 1 143 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 144 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 145 146 #define CONFIG_SYS_MEMTEST_START 0x00000000 147 #define CONFIG_SYS_MEMTEST_END 0x3fffffff 148 149 #ifdef CONFIG_TRAILBLAZER 150 #define CONFIG_SPD_EEPROM 151 #define SPD_EEPROM_ADDRESS 0x52 152 /*#define CONFIG_FSL_DDR_INTERACTIVE*/ 153 #endif 154 155 /* 156 * Local Bus Definitions 157 */ 158 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 159 160 #define CONFIG_SYS_ELBC_BASE 0xe0000000 161 #ifdef CONFIG_PHYS_64BIT 162 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull 163 #else 164 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE 165 #endif 166 167 #define CONFIG_UART_BR_PRELIM \ 168 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) 169 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) 170 171 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ 172 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ 173 174 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM 175 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM 176 177 /* 178 * Serial Port 179 */ 180 #define CONFIG_CONS_INDEX 2 181 #define CONFIG_SYS_NS16550_SERIAL 182 #define CONFIG_SYS_NS16550_REG_SIZE 1 183 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 184 185 #define CONFIG_SYS_BAUDRATE_TABLE \ 186 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 187 188 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 189 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 190 191 /* 192 * I2C 193 */ 194 #define CONFIG_SYS_I2C 195 #define CONFIG_SYS_I2C_FSL 196 #define CONFIG_SYS_FSL_I2C_SPEED 400000 197 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 198 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 199 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 200 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 201 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 202 203 #ifndef CONFIG_TRAILBLAZER 204 #define CONFIG_CMD_I2C 205 #endif 206 207 #define CONFIG_PCA9698 /* NXP PCA9698 */ 208 209 #define CONFIG_CMD_EEPROM 210 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 211 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 212 213 #ifndef CONFIG_TRAILBLAZER 214 /* 215 * eSPI - Enhanced SPI 216 */ 217 #define CONFIG_HARD_SPI 218 219 220 #define CONFIG_CMD_SF 221 #define CONFIG_SF_DEFAULT_SPEED 10000000 222 #define CONFIG_SF_DEFAULT_MODE 0 223 #endif 224 225 #define CONFIG_SHA1 226 227 /* 228 * MMC 229 */ 230 #define CONFIG_MMC 231 #define CONFIG_GENERIC_MMC 232 #define CONFIG_CMD_MMC 233 234 #define CONFIG_FSL_ESDHC 235 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 236 237 238 #ifndef CONFIG_TRAILBLAZER 239 240 /* 241 * Video 242 */ 243 #define CONFIG_FSL_DIU_FB 244 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 245 #define CONFIG_VIDEO 246 #define CONFIG_CFB_CONSOLE 247 #define CONFIG_VGA_AS_SINGLE_DEVICE 248 #define CONFIG_CMD_BMP 249 250 /* 251 * General PCI 252 * Memory space is mapped 1-1, but I/O space must start from 0. 253 */ 254 #define CONFIG_PCI /* Enable PCI/PCIE */ 255 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 256 #define CONFIG_PCI_INDIRECT_BRIDGE 257 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 258 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 259 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 260 #define CONFIG_CMD_PCI 261 262 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 263 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 264 265 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 266 #ifdef CONFIG_PHYS_64BIT 267 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 268 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 269 #else 270 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 271 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 272 #endif 273 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 274 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 275 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 276 #ifdef CONFIG_PHYS_64BIT 277 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 278 #else 279 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 280 #endif 281 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 282 283 /* 284 * SATA 285 */ 286 #define CONFIG_LIBATA 287 #define CONFIG_LBA48 288 #define CONFIG_CMD_SATA 289 290 #define CONFIG_FSL_SATA 291 #define CONFIG_SYS_SATA_MAX_DEVICE 2 292 #define CONFIG_SATA1 293 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 294 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 295 #define CONFIG_SATA2 296 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 297 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 298 299 /* 300 * Ethernet 301 */ 302 #define CONFIG_TSEC_ENET 303 304 #define CONFIG_TSECV2 305 306 #define CONFIG_MII /* MII PHY management */ 307 #define CONFIG_TSEC1 1 308 #define CONFIG_TSEC1_NAME "eTSEC1" 309 #define CONFIG_TSEC2 1 310 #define CONFIG_TSEC2_NAME "eTSEC2" 311 312 #define TSEC1_PHY_ADDR 0 313 #define TSEC2_PHY_ADDR 1 314 315 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 316 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 317 318 #define TSEC1_PHYIDX 0 319 #define TSEC2_PHYIDX 0 320 321 #define CONFIG_ETHPRIME "eTSEC1" 322 323 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 324 325 /* 326 * USB 327 */ 328 #define CONFIG_USB_EHCI 329 #define CONFIG_CMD_USB 330 #define CONFIG_USB_STORAGE 331 332 #define CONFIG_HAS_FSL_DR_USB 333 #define CONFIG_USB_EHCI_FSL 334 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 335 336 #endif /* CONFIG_TRAILBLAZER */ 337 338 /* 339 * Environment 340 */ 341 #if defined(CONFIG_TRAILBLAZER) 342 #define CONFIG_ENV_IS_NOWHERE 343 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 344 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 345 #define CONFIG_ENV_IS_IN_SPI_FLASH 346 #define CONFIG_ENV_SPI_BUS 0 347 #define CONFIG_ENV_SPI_CS 0 348 #define CONFIG_ENV_SPI_MAX_HZ 10000000 349 #define CONFIG_ENV_SPI_MODE 0 350 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 351 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 352 #define CONFIG_ENV_SECT_SIZE 0x10000 353 #elif defined(CONFIG_RAMBOOT_SDCARD) 354 #define CONFIG_ENV_IS_IN_MMC 355 #define CONFIG_FSL_FIXED_MMC_LOCATION 356 #define CONFIG_ENV_SIZE 0x2000 357 #define CONFIG_SYS_MMC_ENV_DEV 0 358 #endif 359 360 #define CONFIG_SYS_EXTRA_ENV_RELOC 361 362 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 363 364 /* 365 * Command line configuration. 366 */ 367 #ifndef CONFIG_TRAILBLAZER 368 #define CONFIG_SYS_HUSH_PARSER 369 #define CONFIG_SYS_LONGHELP 370 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 371 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 372 #endif /* CONFIG_TRAILBLAZER */ 373 374 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 375 #ifdef CONFIG_CMD_KGDB 376 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 377 #else 378 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 379 #endif 380 /* Print Buffer Size */ 381 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 382 #define CONFIG_SYS_MAXARGS 16 383 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 384 385 #ifndef CONFIG_TRAILBLAZER 386 387 #define CONFIG_CMD_ERRATA 388 #define CONFIG_CMD_EXT2 389 #define CONFIG_CMD_FAT 390 #define CONFIG_CMD_IRQ 391 #define CONFIG_CMD_MII 392 #define CONFIG_CMD_PING 393 #define CONFIG_CMD_REGINFO 394 395 /* 396 * Board initialisation callbacks 397 */ 398 #define CONFIG_BOARD_EARLY_INIT_F 399 #define CONFIG_BOARD_EARLY_INIT_R 400 #define CONFIG_MISC_INIT_R 401 #define CONFIG_LAST_STAGE_INIT 402 403 #else /* CONFIG_TRAILBLAZER */ 404 405 #define CONFIG_BOARD_EARLY_INIT_F 406 #define CONFIG_BOARD_EARLY_INIT_R 407 #define CONFIG_LAST_STAGE_INIT 408 409 #endif /* CONFIG_TRAILBLAZER */ 410 411 /* 412 * Miscellaneous configurable options 413 */ 414 #define CONFIG_HW_WATCHDOG 415 #define CONFIG_LOADS_ECHO 416 #define CONFIG_SYS_LOADS_BAUD_CHANGE 417 #define CONFIG_DOS_PARTITION 418 419 /* 420 * For booting Linux, the board info and command line data 421 * have to be in the first 64 MB of memory, since this is 422 * the maximum mapped by the Linux kernel during initialization. 423 */ 424 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ 425 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 426 427 /* 428 * Environment Configuration 429 */ 430 431 #ifdef CONFIG_TRAILBLAZER 432 433 #define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */ 434 #define CONFIG_BAUDRATE 115200 435 436 #define CONFIG_EXTRA_ENV_SETTINGS \ 437 "mp_holdoff=1\0" 438 439 #else 440 441 #define CONFIG_HOSTNAME controlcenterd 442 #define CONFIG_ROOTPATH "/opt/nfsroot" 443 #define CONFIG_BOOTFILE "uImage" 444 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ 445 446 #define CONFIG_LOADADDR 1000000 447 448 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 449 450 #define CONFIG_BAUDRATE 115200 451 452 #define CONFIG_EXTRA_ENV_SETTINGS \ 453 "netdev=eth0\0" \ 454 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 455 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 456 "tftpflash=tftpboot $loadaddr $uboot && " \ 457 "protect off $ubootaddr +$filesize && " \ 458 "erase $ubootaddr +$filesize && " \ 459 "cp.b $loadaddr $ubootaddr $filesize && " \ 460 "protect on $ubootaddr +$filesize && " \ 461 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 462 "consoledev=ttyS1\0" \ 463 "ramdiskaddr=2000000\0" \ 464 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 465 "fdtaddr=c00000\0" \ 466 "fdtfile=controlcenterd.dtb\0" \ 467 "bdev=sda3\0" 468 469 /* these are used and NUL-terminated in env_default.h */ 470 #define CONFIG_NFSBOOTCOMMAND \ 471 "setenv bootargs root=/dev/nfs rw " \ 472 "nfsroot=$serverip:$rootpath " \ 473 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 474 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 475 "tftp $loadaddr $bootfile;" \ 476 "tftp $fdtaddr $fdtfile;" \ 477 "bootm $loadaddr - $fdtaddr" 478 479 #define CONFIG_RAMBOOTCOMMAND \ 480 "setenv bootargs root=/dev/ram rw " \ 481 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 482 "tftp $ramdiskaddr $ramdiskfile;" \ 483 "tftp $loadaddr $bootfile;" \ 484 "tftp $fdtaddr $fdtfile;" \ 485 "bootm $loadaddr $ramdiskaddr $fdtaddr" 486 487 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 488 489 #endif /* CONFIG_TRAILBLAZER */ 490 491 #endif 492