1 /* 2 * (C) Copyright 2013 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * based on P1022DS.h 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_SDCARD 30 #define CONFIG_RAMBOOT_SDCARD 31 #endif 32 33 #ifdef CONFIG_SPIFLASH 34 #define CONFIG_RAMBOOT_SPIFLASH 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_CONTROLCENTERD 39 #define CONFIG_MP /* support multiple processors */ 40 41 #define CONFIG_ENABLE_36BIT_PHYS 42 43 #ifdef CONFIG_PHYS_64BIT 44 #define CONFIG_ADDR_MAP 45 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 46 #endif 47 48 #define CONFIG_L2_CACHE 49 #define CONFIG_BTB 50 51 #define CONFIG_SYS_CLK_FREQ 66666600 52 #define CONFIG_DDR_CLK_FREQ 66666600 53 54 #define CONFIG_SYS_RAMBOOT 55 56 #ifdef CONFIG_TRAILBLAZER 57 58 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 59 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 60 61 /* 62 * Config the L2 Cache 63 */ 64 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 65 #ifdef CONFIG_PHYS_64BIT 66 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull 67 #else 68 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 69 #endif 70 #define CONFIG_SYS_L2_SIZE (256 << 10) 71 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 72 73 #else /* CONFIG_TRAILBLAZER */ 74 75 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 76 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 77 78 #endif /* CONFIG_TRAILBLAZER */ 79 80 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 81 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 82 83 /* 84 * Memory map 85 * 86 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable 87 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable 88 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 89 * 90 * Localbus non-cacheable 91 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable 92 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable 93 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 94 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 95 */ 96 97 #define CONFIG_SYS_INIT_RAM_LOCK 98 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 99 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ 100 #define CONFIG_SYS_GBL_DATA_OFFSET \ 101 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 102 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 103 104 #ifdef CONFIG_TRAILBLAZER 105 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ 106 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 107 #else 108 #define CONFIG_SYS_CCSRBAR 0xffe00000 109 #endif 110 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 111 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) 112 113 /* 114 * DDR Setup 115 */ 116 117 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 118 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 119 #define CONFIG_SYS_SDRAM_SIZE 1024 120 #define CONFIG_VERY_BIG_RAM 121 122 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 123 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 124 125 #define CONFIG_SYS_MEMTEST_START 0x00000000 126 #define CONFIG_SYS_MEMTEST_END 0x3fffffff 127 128 #ifdef CONFIG_TRAILBLAZER 129 #define CONFIG_SPD_EEPROM 130 #define SPD_EEPROM_ADDRESS 0x52 131 /*#define CONFIG_FSL_DDR_INTERACTIVE*/ 132 #endif 133 134 /* 135 * Local Bus Definitions 136 */ 137 138 #define CONFIG_SYS_ELBC_BASE 0xe0000000 139 #ifdef CONFIG_PHYS_64BIT 140 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull 141 #else 142 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE 143 #endif 144 145 #define CONFIG_UART_BR_PRELIM \ 146 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) 147 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) 148 149 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ 150 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ 151 152 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM 153 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM 154 155 /* 156 * Serial Port 157 */ 158 #define CONFIG_SYS_NS16550_SERIAL 159 #define CONFIG_SYS_NS16550_REG_SIZE 1 160 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 161 162 #define CONFIG_SYS_BAUDRATE_TABLE \ 163 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 164 165 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 166 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 167 168 /* 169 * I2C 170 */ 171 #define CONFIG_SYS_I2C 172 #define CONFIG_SYS_I2C_FSL 173 #define CONFIG_SYS_FSL_I2C_SPEED 400000 174 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 175 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 176 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 177 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 178 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 179 180 #ifndef CONFIG_TRAILBLAZER 181 #endif 182 183 #define CONFIG_PCA9698 /* NXP PCA9698 */ 184 185 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 186 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 187 188 #ifndef CONFIG_TRAILBLAZER 189 /* 190 * eSPI - Enhanced SPI 191 */ 192 #define CONFIG_HARD_SPI 193 194 #define CONFIG_SF_DEFAULT_SPEED 10000000 195 #define CONFIG_SF_DEFAULT_MODE 0 196 #endif 197 198 /* 199 * MMC 200 */ 201 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 202 203 #ifndef CONFIG_TRAILBLAZER 204 205 /* 206 * Video 207 */ 208 #define CONFIG_FSL_DIU_FB 209 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 210 211 /* 212 * General PCI 213 * Memory space is mapped 1-1, but I/O space must start from 0. 214 */ 215 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 216 #define CONFIG_PCI_INDIRECT_BRIDGE 217 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 218 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 219 220 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 221 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 222 223 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 224 #ifdef CONFIG_PHYS_64BIT 225 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 226 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 227 #else 228 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 229 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 230 #endif 231 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 232 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 233 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 234 #ifdef CONFIG_PHYS_64BIT 235 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 236 #else 237 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 238 #endif 239 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 240 241 /* 242 * SATA 243 */ 244 #define CONFIG_LBA48 245 246 #define CONFIG_SYS_SATA_MAX_DEVICE 2 247 #define CONFIG_SATA1 248 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 249 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 250 #define CONFIG_SATA2 251 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 252 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 253 254 /* 255 * Ethernet 256 */ 257 258 #define CONFIG_TSECV2 259 260 #define CONFIG_MII /* MII PHY management */ 261 #define CONFIG_TSEC1 1 262 #define CONFIG_TSEC1_NAME "eTSEC1" 263 #define CONFIG_TSEC2 1 264 #define CONFIG_TSEC2_NAME "eTSEC2" 265 266 #define TSEC1_PHY_ADDR 0 267 #define TSEC2_PHY_ADDR 1 268 269 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 270 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 271 272 #define TSEC1_PHYIDX 0 273 #define TSEC2_PHYIDX 0 274 275 #define CONFIG_ETHPRIME "eTSEC1" 276 277 /* 278 * USB 279 */ 280 281 #define CONFIG_HAS_FSL_DR_USB 282 #define CONFIG_USB_EHCI_FSL 283 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 284 285 #endif /* CONFIG_TRAILBLAZER */ 286 287 /* 288 * Environment 289 */ 290 #if defined(CONFIG_TRAILBLAZER) 291 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 292 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 293 #define CONFIG_ENV_SPI_BUS 0 294 #define CONFIG_ENV_SPI_CS 0 295 #define CONFIG_ENV_SPI_MAX_HZ 10000000 296 #define CONFIG_ENV_SPI_MODE 0 297 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 298 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 299 #define CONFIG_ENV_SECT_SIZE 0x10000 300 #elif defined(CONFIG_RAMBOOT_SDCARD) 301 #define CONFIG_FSL_FIXED_MMC_LOCATION 302 #define CONFIG_ENV_SIZE 0x2000 303 #define CONFIG_SYS_MMC_ENV_DEV 0 304 #endif 305 306 #define CONFIG_SYS_EXTRA_ENV_RELOC 307 308 /* 309 * Command line configuration. 310 */ 311 312 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 313 314 #ifndef CONFIG_TRAILBLAZER 315 /* 316 * Board initialisation callbacks 317 */ 318 #define CONFIG_MISC_INIT_R 319 #endif /* CONFIG_TRAILBLAZER */ 320 321 /* 322 * Miscellaneous configurable options 323 */ 324 #define CONFIG_HW_WATCHDOG 325 #define CONFIG_LOADS_ECHO 326 #define CONFIG_SYS_LOADS_BAUD_CHANGE 327 328 /* 329 * For booting Linux, the board info and command line data 330 * have to be in the first 64 MB of memory, since this is 331 * the maximum mapped by the Linux kernel during initialization. 332 */ 333 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ 334 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 335 336 /* 337 * Environment Configuration 338 */ 339 340 #ifdef CONFIG_TRAILBLAZER 341 #define CONFIG_EXTRA_ENV_SETTINGS \ 342 "mp_holdoff=1\0" 343 344 #else 345 346 #define CONFIG_HOSTNAME "controlcenterd" 347 #define CONFIG_ROOTPATH "/opt/nfsroot" 348 #define CONFIG_BOOTFILE "uImage" 349 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ 350 351 #define CONFIG_LOADADDR 1000000 352 353 #define CONFIG_EXTRA_ENV_SETTINGS \ 354 "netdev=eth0\0" \ 355 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 356 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 357 "tftpflash=tftpboot $loadaddr $uboot && " \ 358 "protect off $ubootaddr +$filesize && " \ 359 "erase $ubootaddr +$filesize && " \ 360 "cp.b $loadaddr $ubootaddr $filesize && " \ 361 "protect on $ubootaddr +$filesize && " \ 362 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 363 "consoledev=ttyS1\0" \ 364 "ramdiskaddr=2000000\0" \ 365 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 366 "fdtaddr=1e00000\0" \ 367 "fdtfile=controlcenterd.dtb\0" \ 368 "bdev=sda3\0" 369 370 /* these are used and NUL-terminated in env_default.h */ 371 #define CONFIG_NFSBOOTCOMMAND \ 372 "setenv bootargs root=/dev/nfs rw " \ 373 "nfsroot=$serverip:$rootpath " \ 374 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 375 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 376 "tftp $loadaddr $bootfile;" \ 377 "tftp $fdtaddr $fdtfile;" \ 378 "bootm $loadaddr - $fdtaddr" 379 380 #define CONFIG_RAMBOOTCOMMAND \ 381 "setenv bootargs root=/dev/ram rw " \ 382 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 383 "tftp $ramdiskaddr $ramdiskfile;" \ 384 "tftp $loadaddr $bootfile;" \ 385 "tftp $fdtaddr $fdtfile;" \ 386 "bootm $loadaddr $ramdiskaddr $fdtaddr" 387 388 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 389 390 #endif /* CONFIG_TRAILBLAZER */ 391 392 #endif 393