1 /* 2 * (C) Copyright 2013 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * based on P1022DS.h 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_SDCARD 30 #define CONFIG_RAMBOOT_SDCARD 31 #endif 32 33 #ifdef CONFIG_SPIFLASH 34 #define CONFIG_RAMBOOT_SPIFLASH 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_BOOKE /* BOOKE */ 39 #define CONFIG_E500 /* BOOKE e500 family */ 40 #define CONFIG_P1022 41 #define CONFIG_CONTROLCENTERD 42 #define CONFIG_MP /* support multiple processors */ 43 44 #define CONFIG_SYS_NO_FLASH 45 #define CONFIG_ENABLE_36BIT_PHYS 46 #define CONFIG_FSL_LAW /* Use common FSL init code */ 47 48 #ifdef CONFIG_PHYS_64BIT 49 #define CONFIG_ADDR_MAP 50 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 51 #endif 52 53 #define CONFIG_L2_CACHE 54 #define CONFIG_BTB 55 56 #define CONFIG_SYS_CLK_FREQ 66666600 57 #define CONFIG_DDR_CLK_FREQ 66666600 58 59 #define CONFIG_SYS_RAMBOOT 60 61 #ifdef CONFIG_TRAILBLAZER 62 63 #define CONFIG_SYS_TEXT_BASE 0xf8fc0000 64 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 65 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 66 67 /* 68 * Config the L2 Cache 69 */ 70 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 71 #ifdef CONFIG_PHYS_64BIT 72 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull 73 #else 74 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 75 #endif 76 #define CONFIG_SYS_L2_SIZE (256 << 10) 77 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 78 79 #else /* CONFIG_TRAILBLAZER */ 80 81 #define CONFIG_SYS_TEXT_BASE 0x11000000 82 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 83 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 84 85 #endif /* CONFIG_TRAILBLAZER */ 86 87 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 88 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 89 90 /* 91 * Memory map 92 * 93 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable 94 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable 95 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 96 * 97 * Localbus non-cacheable 98 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable 99 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable 100 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 101 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 102 */ 103 104 #define CONFIG_SYS_INIT_RAM_LOCK 105 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 106 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ 107 #define CONFIG_SYS_GBL_DATA_OFFSET \ 108 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 109 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 110 111 #ifdef CONFIG_TRAILBLAZER 112 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ 113 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 114 #else 115 #define CONFIG_SYS_CCSRBAR 0xffe00000 116 #endif 117 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 118 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) 119 120 /* 121 * DDR Setup 122 */ 123 124 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 125 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 126 #define CONFIG_SYS_SDRAM_SIZE 1024 127 #define CONFIG_VERY_BIG_RAM 128 129 #define CONFIG_SYS_FSL_DDR3 130 #define CONFIG_NUM_DDR_CONTROLLERS 1 131 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 132 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 133 134 #define CONFIG_SYS_MEMTEST_START 0x00000000 135 #define CONFIG_SYS_MEMTEST_END 0x3fffffff 136 137 #ifdef CONFIG_TRAILBLAZER 138 #define CONFIG_SPD_EEPROM 139 #define SPD_EEPROM_ADDRESS 0x52 140 /*#define CONFIG_FSL_DDR_INTERACTIVE*/ 141 #endif 142 143 /* 144 * Local Bus Definitions 145 */ 146 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 147 148 #define CONFIG_SYS_ELBC_BASE 0xe0000000 149 #ifdef CONFIG_PHYS_64BIT 150 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull 151 #else 152 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE 153 #endif 154 155 #define CONFIG_UART_BR_PRELIM \ 156 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) 157 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) 158 159 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ 160 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ 161 162 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM 163 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM 164 165 /* 166 * Serial Port 167 */ 168 #define CONFIG_CONS_INDEX 2 169 #define CONFIG_SYS_NS16550_SERIAL 170 #define CONFIG_SYS_NS16550_REG_SIZE 1 171 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 172 173 #define CONFIG_SYS_BAUDRATE_TABLE \ 174 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 175 176 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 177 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 178 179 /* 180 * I2C 181 */ 182 #define CONFIG_SYS_I2C 183 #define CONFIG_SYS_I2C_FSL 184 #define CONFIG_SYS_FSL_I2C_SPEED 400000 185 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 186 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 187 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 188 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 189 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 190 191 #ifndef CONFIG_TRAILBLAZER 192 #endif 193 194 #define CONFIG_PCA9698 /* NXP PCA9698 */ 195 196 #define CONFIG_CMD_EEPROM 197 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 198 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 199 200 #ifndef CONFIG_TRAILBLAZER 201 /* 202 * eSPI - Enhanced SPI 203 */ 204 #define CONFIG_HARD_SPI 205 206 #define CONFIG_SF_DEFAULT_SPEED 10000000 207 #define CONFIG_SF_DEFAULT_MODE 0 208 #endif 209 210 #define CONFIG_SHA1 211 212 /* 213 * MMC 214 */ 215 #define CONFIG_MMC 216 #define CONFIG_GENERIC_MMC 217 218 #define CONFIG_FSL_ESDHC 219 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 220 221 #ifndef CONFIG_TRAILBLAZER 222 223 /* 224 * Video 225 */ 226 #define CONFIG_FSL_DIU_FB 227 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 228 #define CONFIG_CMD_BMP 229 230 /* 231 * General PCI 232 * Memory space is mapped 1-1, but I/O space must start from 0. 233 */ 234 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 235 #define CONFIG_PCI_INDIRECT_BRIDGE 236 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 237 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 238 #define CONFIG_CMD_PCI 239 240 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 241 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 242 243 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 244 #ifdef CONFIG_PHYS_64BIT 245 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 246 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 247 #else 248 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 249 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 250 #endif 251 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 252 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 253 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 254 #ifdef CONFIG_PHYS_64BIT 255 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 256 #else 257 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 258 #endif 259 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 260 261 /* 262 * SATA 263 */ 264 #define CONFIG_LIBATA 265 #define CONFIG_LBA48 266 #define CONFIG_CMD_SATA 267 268 #define CONFIG_FSL_SATA 269 #define CONFIG_SYS_SATA_MAX_DEVICE 2 270 #define CONFIG_SATA1 271 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 272 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 273 #define CONFIG_SATA2 274 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 275 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 276 277 /* 278 * Ethernet 279 */ 280 #define CONFIG_TSEC_ENET 281 282 #define CONFIG_TSECV2 283 284 #define CONFIG_MII /* MII PHY management */ 285 #define CONFIG_TSEC1 1 286 #define CONFIG_TSEC1_NAME "eTSEC1" 287 #define CONFIG_TSEC2 1 288 #define CONFIG_TSEC2_NAME "eTSEC2" 289 290 #define TSEC1_PHY_ADDR 0 291 #define TSEC2_PHY_ADDR 1 292 293 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 294 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 295 296 #define TSEC1_PHYIDX 0 297 #define TSEC2_PHYIDX 0 298 299 #define CONFIG_ETHPRIME "eTSEC1" 300 301 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 302 303 /* 304 * USB 305 */ 306 #define CONFIG_USB_EHCI 307 308 #define CONFIG_HAS_FSL_DR_USB 309 #define CONFIG_USB_EHCI_FSL 310 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 311 312 #endif /* CONFIG_TRAILBLAZER */ 313 314 /* 315 * Environment 316 */ 317 #if defined(CONFIG_TRAILBLAZER) 318 #define CONFIG_ENV_IS_NOWHERE 319 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 320 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 321 #define CONFIG_ENV_IS_IN_SPI_FLASH 322 #define CONFIG_ENV_SPI_BUS 0 323 #define CONFIG_ENV_SPI_CS 0 324 #define CONFIG_ENV_SPI_MAX_HZ 10000000 325 #define CONFIG_ENV_SPI_MODE 0 326 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 327 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 328 #define CONFIG_ENV_SECT_SIZE 0x10000 329 #elif defined(CONFIG_RAMBOOT_SDCARD) 330 #define CONFIG_ENV_IS_IN_MMC 331 #define CONFIG_FSL_FIXED_MMC_LOCATION 332 #define CONFIG_ENV_SIZE 0x2000 333 #define CONFIG_SYS_MMC_ENV_DEV 0 334 #endif 335 336 #define CONFIG_SYS_EXTRA_ENV_RELOC 337 338 /* 339 * Command line configuration. 340 */ 341 #ifndef CONFIG_TRAILBLAZER 342 #define CONFIG_SYS_LONGHELP 343 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 344 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 345 #endif /* CONFIG_TRAILBLAZER */ 346 347 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 348 #ifdef CONFIG_CMD_KGDB 349 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 350 #else 351 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 352 #endif 353 /* Print Buffer Size */ 354 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 355 #define CONFIG_SYS_MAXARGS 16 356 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 357 358 #ifndef CONFIG_TRAILBLAZER 359 360 #define CONFIG_CMD_ERRATA 361 #define CONFIG_CMD_IRQ 362 #define CONFIG_CMD_REGINFO 363 364 /* 365 * Board initialisation callbacks 366 */ 367 #define CONFIG_BOARD_EARLY_INIT_F 368 #define CONFIG_BOARD_EARLY_INIT_R 369 #define CONFIG_MISC_INIT_R 370 #define CONFIG_LAST_STAGE_INIT 371 372 #else /* CONFIG_TRAILBLAZER */ 373 374 #define CONFIG_BOARD_EARLY_INIT_F 375 #define CONFIG_BOARD_EARLY_INIT_R 376 #define CONFIG_LAST_STAGE_INIT 377 378 #endif /* CONFIG_TRAILBLAZER */ 379 380 /* 381 * Miscellaneous configurable options 382 */ 383 #define CONFIG_HW_WATCHDOG 384 #define CONFIG_LOADS_ECHO 385 #define CONFIG_SYS_LOADS_BAUD_CHANGE 386 #define CONFIG_DOS_PARTITION 387 388 /* 389 * For booting Linux, the board info and command line data 390 * have to be in the first 64 MB of memory, since this is 391 * the maximum mapped by the Linux kernel during initialization. 392 */ 393 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ 394 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 395 396 /* 397 * Environment Configuration 398 */ 399 400 #ifdef CONFIG_TRAILBLAZER 401 402 #define CONFIG_BAUDRATE 115200 403 404 #define CONFIG_EXTRA_ENV_SETTINGS \ 405 "mp_holdoff=1\0" 406 407 #else 408 409 #define CONFIG_HOSTNAME controlcenterd 410 #define CONFIG_ROOTPATH "/opt/nfsroot" 411 #define CONFIG_BOOTFILE "uImage" 412 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ 413 414 #define CONFIG_LOADADDR 1000000 415 416 417 #define CONFIG_BAUDRATE 115200 418 419 #define CONFIG_EXTRA_ENV_SETTINGS \ 420 "netdev=eth0\0" \ 421 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 422 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 423 "tftpflash=tftpboot $loadaddr $uboot && " \ 424 "protect off $ubootaddr +$filesize && " \ 425 "erase $ubootaddr +$filesize && " \ 426 "cp.b $loadaddr $ubootaddr $filesize && " \ 427 "protect on $ubootaddr +$filesize && " \ 428 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 429 "consoledev=ttyS1\0" \ 430 "ramdiskaddr=2000000\0" \ 431 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 432 "fdtaddr=1e00000\0" \ 433 "fdtfile=controlcenterd.dtb\0" \ 434 "bdev=sda3\0" 435 436 /* these are used and NUL-terminated in env_default.h */ 437 #define CONFIG_NFSBOOTCOMMAND \ 438 "setenv bootargs root=/dev/nfs rw " \ 439 "nfsroot=$serverip:$rootpath " \ 440 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 441 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 442 "tftp $loadaddr $bootfile;" \ 443 "tftp $fdtaddr $fdtfile;" \ 444 "bootm $loadaddr - $fdtaddr" 445 446 #define CONFIG_RAMBOOTCOMMAND \ 447 "setenv bootargs root=/dev/ram rw " \ 448 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 449 "tftp $ramdiskaddr $ramdiskfile;" \ 450 "tftp $loadaddr $bootfile;" \ 451 "tftp $fdtaddr $fdtfile;" \ 452 "bootm $loadaddr $ramdiskaddr $fdtaddr" 453 454 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 455 456 #endif /* CONFIG_TRAILBLAZER */ 457 458 #endif 459