1 /* 2 * (C) Copyright 2013 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * based on P1022DS.h 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_36BIT 30 #define CONFIG_PHYS_64BIT 31 #endif 32 33 #ifdef CONFIG_SDCARD 34 #define CONFIG_RAMBOOT_SDCARD 35 #endif 36 37 #ifdef CONFIG_SPIFLASH 38 #define CONFIG_RAMBOOT_SPIFLASH 39 #endif 40 41 /* High Level Configuration Options */ 42 #define CONFIG_BOOKE /* BOOKE */ 43 #define CONFIG_E500 /* BOOKE e500 family */ 44 #define CONFIG_P1022 45 #define CONFIG_CONTROLCENTERD 46 #define CONFIG_MP /* support multiple processors */ 47 48 #define CONFIG_SYS_GENERIC_BOARD 49 50 #define CONFIG_SYS_NO_FLASH 51 #define CONFIG_ENABLE_36BIT_PHYS 52 #define CONFIG_FSL_LAW /* Use common FSL init code */ 53 54 #ifdef CONFIG_TRAILBLAZER 55 #define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01" 56 #else 57 #define CONFIG_IDENT_STRING " controlcenterd 0.01" 58 #endif 59 60 #ifdef CONFIG_PHYS_64BIT 61 #define CONFIG_ADDR_MAP 62 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 63 #endif 64 65 #define CONFIG_L2_CACHE 66 #define CONFIG_BTB 67 68 #define CONFIG_SYS_CLK_FREQ 66666600 69 #define CONFIG_DDR_CLK_FREQ 66666600 70 71 #define CONFIG_SYS_RAMBOOT 72 73 #ifdef CONFIG_TRAILBLAZER 74 75 #define CONFIG_SYS_TEXT_BASE 0xf8fc0000 76 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 77 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 78 79 /* 80 * Config the L2 Cache 81 */ 82 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 83 #ifdef CONFIG_PHYS_64BIT 84 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull 85 #else 86 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 87 #endif 88 #define CONFIG_SYS_L2_SIZE (256 << 10) 89 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 90 91 #else /* CONFIG_TRAILBLAZER */ 92 93 #define CONFIG_SYS_TEXT_BASE 0x11000000 94 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 95 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 96 97 #endif /* CONFIG_TRAILBLAZER */ 98 99 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 100 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 101 102 103 /* 104 * Memory map 105 * 106 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable 107 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable 108 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 109 * 110 * Localbus non-cacheable 111 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable 112 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable 113 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 114 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 115 */ 116 117 #define CONFIG_SYS_INIT_RAM_LOCK 118 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 119 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ 120 #define CONFIG_SYS_GBL_DATA_OFFSET \ 121 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 122 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 123 124 #ifdef CONFIG_TRAILBLAZER 125 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ 126 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 127 #else 128 #define CONFIG_SYS_CCSRBAR 0xffe00000 129 #endif 130 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 131 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) 132 133 /* 134 * DDR Setup 135 */ 136 137 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 138 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 139 #define CONFIG_SYS_SDRAM_SIZE 1024 140 #define CONFIG_VERY_BIG_RAM 141 142 #define CONFIG_SYS_FSL_DDR3 143 #define CONFIG_NUM_DDR_CONTROLLERS 1 144 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 145 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 146 147 #define CONFIG_SYS_MEMTEST_START 0x00000000 148 #define CONFIG_SYS_MEMTEST_END 0x3fffffff 149 150 #ifdef CONFIG_TRAILBLAZER 151 #define CONFIG_SPD_EEPROM 152 #define SPD_EEPROM_ADDRESS 0x52 153 /*#define CONFIG_FSL_DDR_INTERACTIVE*/ 154 #endif 155 156 /* 157 * Local Bus Definitions 158 */ 159 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 160 161 #define CONFIG_SYS_ELBC_BASE 0xe0000000 162 #ifdef CONFIG_PHYS_64BIT 163 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull 164 #else 165 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE 166 #endif 167 168 #define CONFIG_UART_BR_PRELIM \ 169 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) 170 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) 171 172 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ 173 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ 174 175 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM 176 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM 177 178 /* 179 * Serial Port 180 */ 181 #define CONFIG_CONS_INDEX 2 182 #define CONFIG_SYS_NS16550 183 #define CONFIG_SYS_NS16550_SERIAL 184 #define CONFIG_SYS_NS16550_REG_SIZE 1 185 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 186 187 #define CONFIG_SYS_BAUDRATE_TABLE \ 188 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 189 190 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 191 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 192 193 /* 194 * I2C 195 */ 196 #define CONFIG_SYS_I2C 197 #define CONFIG_SYS_I2C_FSL 198 #define CONFIG_SYS_FSL_I2C_SPEED 400000 199 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 200 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 201 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 202 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 203 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 204 205 #ifndef CONFIG_TRAILBLAZER 206 #define CONFIG_CMD_I2C 207 #endif 208 209 #define CONFIG_PCA9698 /* NXP PCA9698 */ 210 211 #define CONFIG_CMD_EEPROM 212 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 213 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 214 215 #ifndef CONFIG_TRAILBLAZER 216 /* 217 * eSPI - Enhanced SPI 218 */ 219 #define CONFIG_HARD_SPI 220 #define CONFIG_FSL_ESPI 221 222 #define CONFIG_SPI_FLASH_STMICRO 223 224 #define CONFIG_CMD_SF 225 #define CONFIG_SF_DEFAULT_SPEED 10000000 226 #define CONFIG_SF_DEFAULT_MODE 0 227 #endif 228 229 /* 230 * TPM 231 */ 232 #define CONFIG_TPM_ATMEL_TWI 233 #define CONFIG_TPM 234 #define CONFIG_TPM_AUTH_SESSIONS 235 #define CONFIG_SHA1 236 #define CONFIG_CMD_TPM 237 238 /* 239 * MMC 240 */ 241 #define CONFIG_MMC 242 #define CONFIG_GENERIC_MMC 243 #define CONFIG_CMD_MMC 244 245 #define CONFIG_FSL_ESDHC 246 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 247 248 249 #ifndef CONFIG_TRAILBLAZER 250 251 /* 252 * Video 253 */ 254 #define CONFIG_FSL_DIU_FB 255 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 256 #define CONFIG_VIDEO 257 #define CONFIG_CFB_CONSOLE 258 #define CONFIG_VGA_AS_SINGLE_DEVICE 259 #define CONFIG_CMD_BMP 260 261 /* 262 * General PCI 263 * Memory space is mapped 1-1, but I/O space must start from 0. 264 */ 265 #define CONFIG_PCI /* Enable PCI/PCIE */ 266 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 267 #define CONFIG_PCI_INDIRECT_BRIDGE 268 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 269 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 270 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 271 #define CONFIG_CMD_PCI 272 273 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 274 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 275 276 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 277 #ifdef CONFIG_PHYS_64BIT 278 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 279 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 280 #else 281 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 282 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 283 #endif 284 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 285 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 286 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 287 #ifdef CONFIG_PHYS_64BIT 288 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 289 #else 290 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 291 #endif 292 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 293 294 /* 295 * SATA 296 */ 297 #define CONFIG_LIBATA 298 #define CONFIG_LBA48 299 #define CONFIG_CMD_SATA 300 301 #define CONFIG_FSL_SATA 302 #define CONFIG_SYS_SATA_MAX_DEVICE 2 303 #define CONFIG_SATA1 304 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 305 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 306 #define CONFIG_SATA2 307 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 308 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 309 310 /* 311 * Ethernet 312 */ 313 #define CONFIG_TSEC_ENET 314 315 #define CONFIG_TSECV2 316 317 #define CONFIG_MII /* MII PHY management */ 318 #define CONFIG_TSEC1 1 319 #define CONFIG_TSEC1_NAME "eTSEC1" 320 #define CONFIG_TSEC2 1 321 #define CONFIG_TSEC2_NAME "eTSEC2" 322 323 #define TSEC1_PHY_ADDR 0 324 #define TSEC2_PHY_ADDR 1 325 326 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 327 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 328 329 #define TSEC1_PHYIDX 0 330 #define TSEC2_PHYIDX 0 331 332 #define CONFIG_ETHPRIME "eTSEC1" 333 334 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 335 336 /* 337 * USB 338 */ 339 #define CONFIG_USB_EHCI 340 #define CONFIG_CMD_USB 341 #define CONFIG_USB_STORAGE 342 343 #define CONFIG_HAS_FSL_DR_USB 344 #define CONFIG_USB_EHCI_FSL 345 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 346 347 #endif /* CONFIG_TRAILBLAZER */ 348 349 /* 350 * Environment 351 */ 352 #if defined(CONFIG_TRAILBLAZER) 353 #define CONFIG_ENV_IS_NOWHERE 354 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 355 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 356 #define CONFIG_ENV_IS_IN_SPI_FLASH 357 #define CONFIG_ENV_SPI_BUS 0 358 #define CONFIG_ENV_SPI_CS 0 359 #define CONFIG_ENV_SPI_MAX_HZ 10000000 360 #define CONFIG_ENV_SPI_MODE 0 361 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 362 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 363 #define CONFIG_ENV_SECT_SIZE 0x10000 364 #elif defined(CONFIG_RAMBOOT_SDCARD) 365 #define CONFIG_ENV_IS_IN_MMC 366 #define CONFIG_FSL_FIXED_MMC_LOCATION 367 #define CONFIG_ENV_SIZE 0x2000 368 #define CONFIG_SYS_MMC_ENV_DEV 0 369 #endif 370 371 #define CONFIG_SYS_EXTRA_ENV_RELOC 372 373 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 374 375 /* 376 * Command line configuration. 377 */ 378 #ifndef CONFIG_TRAILBLAZER 379 #define CONFIG_SYS_HUSH_PARSER 380 #define CONFIG_SYS_LONGHELP 381 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 382 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 383 #endif /* CONFIG_TRAILBLAZER */ 384 385 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 386 #ifdef CONFIG_CMD_KGDB 387 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 388 #else 389 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 390 #endif 391 /* Print Buffer Size */ 392 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 393 #define CONFIG_SYS_MAXARGS 16 394 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 395 396 #ifndef CONFIG_TRAILBLAZER 397 398 #define CONFIG_CMD_ELF 399 #define CONFIG_CMD_ERRATA 400 #define CONFIG_CMD_EXT2 401 #define CONFIG_CMD_FAT 402 #define CONFIG_CMD_IRQ 403 #define CONFIG_CMD_MII 404 #define CONFIG_CMD_PING 405 #define CONFIG_CMD_REGINFO 406 407 /* 408 * Board initialisation callbacks 409 */ 410 #define CONFIG_BOARD_EARLY_INIT_F 411 #define CONFIG_BOARD_EARLY_INIT_R 412 #define CONFIG_MISC_INIT_R 413 #define CONFIG_LAST_STAGE_INIT 414 415 /* 416 * Pass open firmware flat tree 417 */ 418 #define CONFIG_OF_LIBFDT 419 #define CONFIG_OF_BOARD_SETUP 420 #define CONFIG_OF_STDOUT_VIA_ALIAS 421 422 /* new uImage format support */ 423 #define CONFIG_FIT 424 #define CONFIG_FIT_VERBOSE 425 426 #else /* CONFIG_TRAILBLAZER */ 427 428 #define CONFIG_BOARD_EARLY_INIT_F 429 #define CONFIG_BOARD_EARLY_INIT_R 430 #define CONFIG_LAST_STAGE_INIT 431 432 #endif /* CONFIG_TRAILBLAZER */ 433 434 /* 435 * Miscellaneous configurable options 436 */ 437 #define CONFIG_HW_WATCHDOG 438 #define CONFIG_LOADS_ECHO 439 #define CONFIG_SYS_LOADS_BAUD_CHANGE 440 #define CONFIG_DOS_PARTITION 441 442 /* 443 * For booting Linux, the board info and command line data 444 * have to be in the first 64 MB of memory, since this is 445 * the maximum mapped by the Linux kernel during initialization. 446 */ 447 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ 448 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 449 450 /* 451 * Environment Configuration 452 */ 453 454 #ifdef CONFIG_TRAILBLAZER 455 456 #define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */ 457 #define CONFIG_BAUDRATE 115200 458 459 #define CONFIG_EXTRA_ENV_SETTINGS \ 460 "mp_holdoff=1\0" 461 462 #else 463 464 #define CONFIG_HOSTNAME controlcenterd 465 #define CONFIG_ROOTPATH "/opt/nfsroot" 466 #define CONFIG_BOOTFILE "uImage" 467 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ 468 469 #define CONFIG_LOADADDR 1000000 470 471 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 472 473 #define CONFIG_BAUDRATE 115200 474 475 #define CONFIG_EXTRA_ENV_SETTINGS \ 476 "netdev=eth0\0" \ 477 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 478 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 479 "tftpflash=tftpboot $loadaddr $uboot && " \ 480 "protect off $ubootaddr +$filesize && " \ 481 "erase $ubootaddr +$filesize && " \ 482 "cp.b $loadaddr $ubootaddr $filesize && " \ 483 "protect on $ubootaddr +$filesize && " \ 484 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 485 "consoledev=ttyS1\0" \ 486 "ramdiskaddr=2000000\0" \ 487 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 488 "fdtaddr=c00000\0" \ 489 "fdtfile=controlcenterd.dtb\0" \ 490 "bdev=sda3\0" 491 492 /* these are used and NUL-terminated in env_default.h */ 493 #define CONFIG_NFSBOOTCOMMAND \ 494 "setenv bootargs root=/dev/nfs rw " \ 495 "nfsroot=$serverip:$rootpath " \ 496 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 497 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 498 "tftp $loadaddr $bootfile;" \ 499 "tftp $fdtaddr $fdtfile;" \ 500 "bootm $loadaddr - $fdtaddr" 501 502 #define CONFIG_RAMBOOTCOMMAND \ 503 "setenv bootargs root=/dev/ram rw " \ 504 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 505 "tftp $ramdiskaddr $ramdiskfile;" \ 506 "tftp $loadaddr $bootfile;" \ 507 "tftp $fdtaddr $fdtfile;" \ 508 "bootm $loadaddr $ramdiskaddr $fdtaddr" 509 510 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 511 512 #endif /* CONFIG_TRAILBLAZER */ 513 514 #endif 515