1 /* 2 * (C) Copyright 2013 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * based on P1022DS.h 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_SDCARD 30 #define CONFIG_RAMBOOT_SDCARD 31 #endif 32 33 #ifdef CONFIG_SPIFLASH 34 #define CONFIG_RAMBOOT_SPIFLASH 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_BOOKE /* BOOKE */ 39 #define CONFIG_E500 /* BOOKE e500 family */ 40 #define CONFIG_P1022 41 #define CONFIG_CONTROLCENTERD 42 #define CONFIG_MP /* support multiple processors */ 43 44 #define CONFIG_SYS_NO_FLASH 45 #define CONFIG_ENABLE_36BIT_PHYS 46 #define CONFIG_FSL_LAW /* Use common FSL init code */ 47 48 #ifdef CONFIG_PHYS_64BIT 49 #define CONFIG_ADDR_MAP 50 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 51 #endif 52 53 #define CONFIG_L2_CACHE 54 #define CONFIG_BTB 55 56 #define CONFIG_SYS_CLK_FREQ 66666600 57 #define CONFIG_DDR_CLK_FREQ 66666600 58 59 #define CONFIG_SYS_RAMBOOT 60 61 #ifdef CONFIG_TRAILBLAZER 62 63 #define CONFIG_SYS_TEXT_BASE 0xf8fc0000 64 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 65 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 66 67 /* 68 * Config the L2 Cache 69 */ 70 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 71 #ifdef CONFIG_PHYS_64BIT 72 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull 73 #else 74 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 75 #endif 76 #define CONFIG_SYS_L2_SIZE (256 << 10) 77 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 78 79 #else /* CONFIG_TRAILBLAZER */ 80 81 #define CONFIG_SYS_TEXT_BASE 0x11000000 82 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 83 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 84 85 #endif /* CONFIG_TRAILBLAZER */ 86 87 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 88 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 89 90 /* 91 * Memory map 92 * 93 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable 94 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable 95 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 96 * 97 * Localbus non-cacheable 98 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable 99 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable 100 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 101 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 102 */ 103 104 #define CONFIG_SYS_INIT_RAM_LOCK 105 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 106 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ 107 #define CONFIG_SYS_GBL_DATA_OFFSET \ 108 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 109 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 110 111 #ifdef CONFIG_TRAILBLAZER 112 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ 113 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 114 #else 115 #define CONFIG_SYS_CCSRBAR 0xffe00000 116 #endif 117 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 118 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) 119 120 /* 121 * DDR Setup 122 */ 123 124 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 125 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 126 #define CONFIG_SYS_SDRAM_SIZE 1024 127 #define CONFIG_VERY_BIG_RAM 128 129 #define CONFIG_SYS_FSL_DDR3 130 #define CONFIG_NUM_DDR_CONTROLLERS 1 131 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 132 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 133 134 #define CONFIG_SYS_MEMTEST_START 0x00000000 135 #define CONFIG_SYS_MEMTEST_END 0x3fffffff 136 137 #ifdef CONFIG_TRAILBLAZER 138 #define CONFIG_SPD_EEPROM 139 #define SPD_EEPROM_ADDRESS 0x52 140 /*#define CONFIG_FSL_DDR_INTERACTIVE*/ 141 #endif 142 143 /* 144 * Local Bus Definitions 145 */ 146 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 147 148 #define CONFIG_SYS_ELBC_BASE 0xe0000000 149 #ifdef CONFIG_PHYS_64BIT 150 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull 151 #else 152 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE 153 #endif 154 155 #define CONFIG_UART_BR_PRELIM \ 156 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) 157 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) 158 159 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ 160 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ 161 162 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM 163 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM 164 165 /* 166 * Serial Port 167 */ 168 #define CONFIG_CONS_INDEX 2 169 #define CONFIG_SYS_NS16550_SERIAL 170 #define CONFIG_SYS_NS16550_REG_SIZE 1 171 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 172 173 #define CONFIG_SYS_BAUDRATE_TABLE \ 174 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 175 176 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 177 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 178 179 /* 180 * I2C 181 */ 182 #define CONFIG_SYS_I2C 183 #define CONFIG_SYS_I2C_FSL 184 #define CONFIG_SYS_FSL_I2C_SPEED 400000 185 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 186 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 187 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 188 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 189 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 190 191 #ifndef CONFIG_TRAILBLAZER 192 #endif 193 194 #define CONFIG_PCA9698 /* NXP PCA9698 */ 195 196 #define CONFIG_CMD_EEPROM 197 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 198 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 199 200 #ifndef CONFIG_TRAILBLAZER 201 /* 202 * eSPI - Enhanced SPI 203 */ 204 #define CONFIG_HARD_SPI 205 206 #define CONFIG_SF_DEFAULT_SPEED 10000000 207 #define CONFIG_SF_DEFAULT_MODE 0 208 #endif 209 210 #define CONFIG_SHA1 211 212 /* 213 * MMC 214 */ 215 #define CONFIG_MMC 216 #define CONFIG_GENERIC_MMC 217 218 #define CONFIG_FSL_ESDHC 219 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 220 221 #ifndef CONFIG_TRAILBLAZER 222 223 /* 224 * Video 225 */ 226 #define CONFIG_FSL_DIU_FB 227 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 228 #define CONFIG_CMD_BMP 229 230 /* 231 * General PCI 232 * Memory space is mapped 1-1, but I/O space must start from 0. 233 */ 234 #define CONFIG_PCI /* Enable PCI/PCIE */ 235 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 236 #define CONFIG_PCI_INDIRECT_BRIDGE 237 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 238 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 239 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 240 #define CONFIG_CMD_PCI 241 242 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 243 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 244 245 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 246 #ifdef CONFIG_PHYS_64BIT 247 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 248 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 249 #else 250 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 251 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 252 #endif 253 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 254 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 255 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 256 #ifdef CONFIG_PHYS_64BIT 257 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 258 #else 259 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 260 #endif 261 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 262 263 /* 264 * SATA 265 */ 266 #define CONFIG_LIBATA 267 #define CONFIG_LBA48 268 #define CONFIG_CMD_SATA 269 270 #define CONFIG_FSL_SATA 271 #define CONFIG_SYS_SATA_MAX_DEVICE 2 272 #define CONFIG_SATA1 273 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 274 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 275 #define CONFIG_SATA2 276 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 277 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 278 279 /* 280 * Ethernet 281 */ 282 #define CONFIG_TSEC_ENET 283 284 #define CONFIG_TSECV2 285 286 #define CONFIG_MII /* MII PHY management */ 287 #define CONFIG_TSEC1 1 288 #define CONFIG_TSEC1_NAME "eTSEC1" 289 #define CONFIG_TSEC2 1 290 #define CONFIG_TSEC2_NAME "eTSEC2" 291 292 #define TSEC1_PHY_ADDR 0 293 #define TSEC2_PHY_ADDR 1 294 295 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 296 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 297 298 #define TSEC1_PHYIDX 0 299 #define TSEC2_PHYIDX 0 300 301 #define CONFIG_ETHPRIME "eTSEC1" 302 303 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 304 305 /* 306 * USB 307 */ 308 #define CONFIG_USB_EHCI 309 310 #define CONFIG_HAS_FSL_DR_USB 311 #define CONFIG_USB_EHCI_FSL 312 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 313 314 #endif /* CONFIG_TRAILBLAZER */ 315 316 /* 317 * Environment 318 */ 319 #if defined(CONFIG_TRAILBLAZER) 320 #define CONFIG_ENV_IS_NOWHERE 321 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 322 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 323 #define CONFIG_ENV_IS_IN_SPI_FLASH 324 #define CONFIG_ENV_SPI_BUS 0 325 #define CONFIG_ENV_SPI_CS 0 326 #define CONFIG_ENV_SPI_MAX_HZ 10000000 327 #define CONFIG_ENV_SPI_MODE 0 328 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 329 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 330 #define CONFIG_ENV_SECT_SIZE 0x10000 331 #elif defined(CONFIG_RAMBOOT_SDCARD) 332 #define CONFIG_ENV_IS_IN_MMC 333 #define CONFIG_FSL_FIXED_MMC_LOCATION 334 #define CONFIG_ENV_SIZE 0x2000 335 #define CONFIG_SYS_MMC_ENV_DEV 0 336 #endif 337 338 #define CONFIG_SYS_EXTRA_ENV_RELOC 339 340 /* 341 * Command line configuration. 342 */ 343 #ifndef CONFIG_TRAILBLAZER 344 #define CONFIG_SYS_LONGHELP 345 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 346 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 347 #endif /* CONFIG_TRAILBLAZER */ 348 349 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 350 #ifdef CONFIG_CMD_KGDB 351 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 352 #else 353 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 354 #endif 355 /* Print Buffer Size */ 356 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 357 #define CONFIG_SYS_MAXARGS 16 358 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 359 360 #ifndef CONFIG_TRAILBLAZER 361 362 #define CONFIG_CMD_ERRATA 363 #define CONFIG_CMD_IRQ 364 #define CONFIG_CMD_REGINFO 365 366 /* 367 * Board initialisation callbacks 368 */ 369 #define CONFIG_BOARD_EARLY_INIT_F 370 #define CONFIG_BOARD_EARLY_INIT_R 371 #define CONFIG_MISC_INIT_R 372 #define CONFIG_LAST_STAGE_INIT 373 374 #else /* CONFIG_TRAILBLAZER */ 375 376 #define CONFIG_BOARD_EARLY_INIT_F 377 #define CONFIG_BOARD_EARLY_INIT_R 378 #define CONFIG_LAST_STAGE_INIT 379 380 #endif /* CONFIG_TRAILBLAZER */ 381 382 /* 383 * Miscellaneous configurable options 384 */ 385 #define CONFIG_HW_WATCHDOG 386 #define CONFIG_LOADS_ECHO 387 #define CONFIG_SYS_LOADS_BAUD_CHANGE 388 #define CONFIG_DOS_PARTITION 389 390 /* 391 * For booting Linux, the board info and command line data 392 * have to be in the first 64 MB of memory, since this is 393 * the maximum mapped by the Linux kernel during initialization. 394 */ 395 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ 396 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 397 398 /* 399 * Environment Configuration 400 */ 401 402 #ifdef CONFIG_TRAILBLAZER 403 404 #define CONFIG_BAUDRATE 115200 405 406 #define CONFIG_EXTRA_ENV_SETTINGS \ 407 "mp_holdoff=1\0" 408 409 #else 410 411 #define CONFIG_HOSTNAME controlcenterd 412 #define CONFIG_ROOTPATH "/opt/nfsroot" 413 #define CONFIG_BOOTFILE "uImage" 414 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ 415 416 #define CONFIG_LOADADDR 1000000 417 418 419 #define CONFIG_BAUDRATE 115200 420 421 #define CONFIG_EXTRA_ENV_SETTINGS \ 422 "netdev=eth0\0" \ 423 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 424 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 425 "tftpflash=tftpboot $loadaddr $uboot && " \ 426 "protect off $ubootaddr +$filesize && " \ 427 "erase $ubootaddr +$filesize && " \ 428 "cp.b $loadaddr $ubootaddr $filesize && " \ 429 "protect on $ubootaddr +$filesize && " \ 430 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 431 "consoledev=ttyS1\0" \ 432 "ramdiskaddr=2000000\0" \ 433 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 434 "fdtaddr=1e00000\0" \ 435 "fdtfile=controlcenterd.dtb\0" \ 436 "bdev=sda3\0" 437 438 /* these are used and NUL-terminated in env_default.h */ 439 #define CONFIG_NFSBOOTCOMMAND \ 440 "setenv bootargs root=/dev/nfs rw " \ 441 "nfsroot=$serverip:$rootpath " \ 442 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 443 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 444 "tftp $loadaddr $bootfile;" \ 445 "tftp $fdtaddr $fdtfile;" \ 446 "bootm $loadaddr - $fdtaddr" 447 448 #define CONFIG_RAMBOOTCOMMAND \ 449 "setenv bootargs root=/dev/ram rw " \ 450 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 451 "tftp $ramdiskaddr $ramdiskfile;" \ 452 "tftp $loadaddr $bootfile;" \ 453 "tftp $fdtaddr $fdtfile;" \ 454 "bootm $loadaddr $ramdiskaddr $fdtaddr" 455 456 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 457 458 #endif /* CONFIG_TRAILBLAZER */ 459 460 #endif 461