1 /* 2 * (C) Copyright 2013 3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc 4 * 5 * based on P1022DS.h 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_SDCARD 30 #define CONFIG_RAMBOOT_SDCARD 31 #endif 32 33 #ifdef CONFIG_SPIFLASH 34 #define CONFIG_RAMBOOT_SPIFLASH 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_CONTROLCENTERD 39 #define CONFIG_MP /* support multiple processors */ 40 41 #define CONFIG_ENABLE_36BIT_PHYS 42 43 #ifdef CONFIG_PHYS_64BIT 44 #define CONFIG_ADDR_MAP 45 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 46 #endif 47 48 #define CONFIG_L2_CACHE 49 #define CONFIG_BTB 50 51 #define CONFIG_SYS_CLK_FREQ 66666600 52 #define CONFIG_DDR_CLK_FREQ 66666600 53 54 #define CONFIG_SYS_RAMBOOT 55 56 #ifdef CONFIG_TRAILBLAZER 57 58 #define CONFIG_SYS_TEXT_BASE 0xf8fc0000 59 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 60 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 61 62 /* 63 * Config the L2 Cache 64 */ 65 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 66 #ifdef CONFIG_PHYS_64BIT 67 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull 68 #else 69 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 70 #endif 71 #define CONFIG_SYS_L2_SIZE (256 << 10) 72 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 73 74 #else /* CONFIG_TRAILBLAZER */ 75 76 #define CONFIG_SYS_TEXT_BASE 0x11000000 77 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 78 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 79 80 #endif /* CONFIG_TRAILBLAZER */ 81 82 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 83 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 84 85 /* 86 * Memory map 87 * 88 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable 89 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable 90 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 91 * 92 * Localbus non-cacheable 93 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable 94 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable 95 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 96 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 97 */ 98 99 #define CONFIG_SYS_INIT_RAM_LOCK 100 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 101 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ 102 #define CONFIG_SYS_GBL_DATA_OFFSET \ 103 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 104 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 105 106 #ifdef CONFIG_TRAILBLAZER 107 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ 108 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 109 #else 110 #define CONFIG_SYS_CCSRBAR 0xffe00000 111 #endif 112 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 113 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) 114 115 /* 116 * DDR Setup 117 */ 118 119 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 120 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 121 #define CONFIG_SYS_SDRAM_SIZE 1024 122 #define CONFIG_VERY_BIG_RAM 123 124 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 125 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 126 127 #define CONFIG_SYS_MEMTEST_START 0x00000000 128 #define CONFIG_SYS_MEMTEST_END 0x3fffffff 129 130 #ifdef CONFIG_TRAILBLAZER 131 #define CONFIG_SPD_EEPROM 132 #define SPD_EEPROM_ADDRESS 0x52 133 /*#define CONFIG_FSL_DDR_INTERACTIVE*/ 134 #endif 135 136 /* 137 * Local Bus Definitions 138 */ 139 140 #define CONFIG_SYS_ELBC_BASE 0xe0000000 141 #ifdef CONFIG_PHYS_64BIT 142 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull 143 #else 144 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE 145 #endif 146 147 #define CONFIG_UART_BR_PRELIM \ 148 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) 149 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) 150 151 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ 152 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ 153 154 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM 155 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM 156 157 /* 158 * Serial Port 159 */ 160 #define CONFIG_CONS_INDEX 2 161 #define CONFIG_SYS_NS16550_SERIAL 162 #define CONFIG_SYS_NS16550_REG_SIZE 1 163 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 164 165 #define CONFIG_SYS_BAUDRATE_TABLE \ 166 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 167 168 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 169 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 170 171 /* 172 * I2C 173 */ 174 #define CONFIG_SYS_I2C 175 #define CONFIG_SYS_I2C_FSL 176 #define CONFIG_SYS_FSL_I2C_SPEED 400000 177 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 178 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 179 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 180 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 181 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 182 183 #ifndef CONFIG_TRAILBLAZER 184 #endif 185 186 #define CONFIG_PCA9698 /* NXP PCA9698 */ 187 188 #define CONFIG_CMD_EEPROM 189 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 190 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 191 192 #ifndef CONFIG_TRAILBLAZER 193 /* 194 * eSPI - Enhanced SPI 195 */ 196 #define CONFIG_HARD_SPI 197 198 #define CONFIG_SF_DEFAULT_SPEED 10000000 199 #define CONFIG_SF_DEFAULT_MODE 0 200 #endif 201 202 /* 203 * MMC 204 */ 205 #define CONFIG_FSL_ESDHC 206 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 207 208 #ifndef CONFIG_TRAILBLAZER 209 210 /* 211 * Video 212 */ 213 #define CONFIG_FSL_DIU_FB 214 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 215 216 /* 217 * General PCI 218 * Memory space is mapped 1-1, but I/O space must start from 0. 219 */ 220 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 221 #define CONFIG_PCI_INDIRECT_BRIDGE 222 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 223 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 224 #define CONFIG_CMD_PCI 225 226 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 227 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 228 229 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 230 #ifdef CONFIG_PHYS_64BIT 231 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 232 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 233 #else 234 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 235 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 236 #endif 237 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 238 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 239 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 240 #ifdef CONFIG_PHYS_64BIT 241 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 242 #else 243 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 244 #endif 245 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 246 247 /* 248 * SATA 249 */ 250 #define CONFIG_LIBATA 251 #define CONFIG_LBA48 252 #define CONFIG_CMD_SATA 253 254 #define CONFIG_FSL_SATA 255 #define CONFIG_SYS_SATA_MAX_DEVICE 2 256 #define CONFIG_SATA1 257 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 258 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 259 #define CONFIG_SATA2 260 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 261 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 262 263 /* 264 * Ethernet 265 */ 266 #define CONFIG_TSEC_ENET 267 268 #define CONFIG_TSECV2 269 270 #define CONFIG_MII /* MII PHY management */ 271 #define CONFIG_TSEC1 1 272 #define CONFIG_TSEC1_NAME "eTSEC1" 273 #define CONFIG_TSEC2 1 274 #define CONFIG_TSEC2_NAME "eTSEC2" 275 276 #define TSEC1_PHY_ADDR 0 277 #define TSEC2_PHY_ADDR 1 278 279 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 280 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 281 282 #define TSEC1_PHYIDX 0 283 #define TSEC2_PHYIDX 0 284 285 #define CONFIG_ETHPRIME "eTSEC1" 286 287 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 288 289 /* 290 * USB 291 */ 292 293 #define CONFIG_HAS_FSL_DR_USB 294 #define CONFIG_USB_EHCI_FSL 295 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 296 297 #endif /* CONFIG_TRAILBLAZER */ 298 299 /* 300 * Environment 301 */ 302 #if defined(CONFIG_TRAILBLAZER) 303 #define CONFIG_ENV_IS_NOWHERE 304 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 305 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 306 #define CONFIG_ENV_IS_IN_SPI_FLASH 307 #define CONFIG_ENV_SPI_BUS 0 308 #define CONFIG_ENV_SPI_CS 0 309 #define CONFIG_ENV_SPI_MAX_HZ 10000000 310 #define CONFIG_ENV_SPI_MODE 0 311 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 312 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 313 #define CONFIG_ENV_SECT_SIZE 0x10000 314 #elif defined(CONFIG_RAMBOOT_SDCARD) 315 #define CONFIG_ENV_IS_IN_MMC 316 #define CONFIG_FSL_FIXED_MMC_LOCATION 317 #define CONFIG_ENV_SIZE 0x2000 318 #define CONFIG_SYS_MMC_ENV_DEV 0 319 #endif 320 321 #define CONFIG_SYS_EXTRA_ENV_RELOC 322 323 /* 324 * Command line configuration. 325 */ 326 #ifndef CONFIG_TRAILBLAZER 327 #define CONFIG_SYS_LONGHELP 328 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 329 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 330 #endif /* CONFIG_TRAILBLAZER */ 331 332 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 333 #ifdef CONFIG_CMD_KGDB 334 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 335 #else 336 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 337 #endif 338 /* Print Buffer Size */ 339 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 340 #define CONFIG_SYS_MAXARGS 16 341 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 342 343 #ifndef CONFIG_TRAILBLAZER 344 345 #define CONFIG_CMD_ERRATA 346 #define CONFIG_CMD_IRQ 347 #define CONFIG_CMD_REGINFO 348 349 /* 350 * Board initialisation callbacks 351 */ 352 #define CONFIG_BOARD_EARLY_INIT_R 353 #define CONFIG_MISC_INIT_R 354 #define CONFIG_LAST_STAGE_INIT 355 356 #else /* CONFIG_TRAILBLAZER */ 357 358 #define CONFIG_BOARD_EARLY_INIT_R 359 #define CONFIG_LAST_STAGE_INIT 360 361 #endif /* CONFIG_TRAILBLAZER */ 362 363 /* 364 * Miscellaneous configurable options 365 */ 366 #define CONFIG_HW_WATCHDOG 367 #define CONFIG_LOADS_ECHO 368 #define CONFIG_SYS_LOADS_BAUD_CHANGE 369 370 /* 371 * For booting Linux, the board info and command line data 372 * have to be in the first 64 MB of memory, since this is 373 * the maximum mapped by the Linux kernel during initialization. 374 */ 375 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ 376 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 377 378 /* 379 * Environment Configuration 380 */ 381 382 #ifdef CONFIG_TRAILBLAZER 383 #define CONFIG_EXTRA_ENV_SETTINGS \ 384 "mp_holdoff=1\0" 385 386 #else 387 388 #define CONFIG_HOSTNAME controlcenterd 389 #define CONFIG_ROOTPATH "/opt/nfsroot" 390 #define CONFIG_BOOTFILE "uImage" 391 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ 392 393 #define CONFIG_LOADADDR 1000000 394 395 #define CONFIG_EXTRA_ENV_SETTINGS \ 396 "netdev=eth0\0" \ 397 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 398 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 399 "tftpflash=tftpboot $loadaddr $uboot && " \ 400 "protect off $ubootaddr +$filesize && " \ 401 "erase $ubootaddr +$filesize && " \ 402 "cp.b $loadaddr $ubootaddr $filesize && " \ 403 "protect on $ubootaddr +$filesize && " \ 404 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 405 "consoledev=ttyS1\0" \ 406 "ramdiskaddr=2000000\0" \ 407 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 408 "fdtaddr=1e00000\0" \ 409 "fdtfile=controlcenterd.dtb\0" \ 410 "bdev=sda3\0" 411 412 /* these are used and NUL-terminated in env_default.h */ 413 #define CONFIG_NFSBOOTCOMMAND \ 414 "setenv bootargs root=/dev/nfs rw " \ 415 "nfsroot=$serverip:$rootpath " \ 416 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 417 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 418 "tftp $loadaddr $bootfile;" \ 419 "tftp $fdtaddr $fdtfile;" \ 420 "bootm $loadaddr - $fdtaddr" 421 422 #define CONFIG_RAMBOOTCOMMAND \ 423 "setenv bootargs root=/dev/ram rw " \ 424 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 425 "tftp $ramdiskaddr $ramdiskfile;" \ 426 "tftp $loadaddr $bootfile;" \ 427 "tftp $fdtaddr $fdtfile;" \ 428 "bootm $loadaddr $ramdiskaddr $fdtaddr" 429 430 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 431 432 #endif /* CONFIG_TRAILBLAZER */ 433 434 #endif 435