1 /* 2 * Copyright 2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 module. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_SYS_CACHELINE_SIZE 32 16 17 #include <asm/arch/imx-regs.h> 18 19 #define CONFIG_VF610 20 #define CONFIG_SYS_THUMB_BUILD 21 #define CONFIG_USE_ARCH_MEMCPY 22 #define CONFIG_USE_ARCH_MEMSET 23 #define CONFIG_SYS_FSL_CLK 24 25 #define CONFIG_ARCH_MISC_INIT 26 #define CONFIG_DISPLAY_CPUINFO 27 #define CONFIG_DISPLAY_BOARDINFO 28 29 #define CONFIG_SKIP_LOWLEVEL_INIT 30 31 #define CONFIG_CMD_FUSE 32 #ifdef CONFIG_CMD_FUSE 33 #define CONFIG_MXC_OCOTP 34 #endif 35 36 /* Size of malloc() pool */ 37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 38 39 #define CONFIG_BOARD_EARLY_INIT_F 40 41 /* Allow to overwrite serial and ethaddr */ 42 #define CONFIG_ENV_OVERWRITE 43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 44 #define CONFIG_VERSION_VARIABLE 45 #define CONFIG_BAUDRATE 115200 46 #define CONFIG_CMD_ASKENV 47 48 /* NAND support */ 49 #define CONFIG_CMD_NAND 50 #define CONFIG_SYS_NAND_ONFI_DETECTION 51 #define CONFIG_SYS_MAX_NAND_DEVICE 1 52 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 53 54 /* Dynamic MTD partition support */ 55 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ 56 #define CONFIG_MTD_PARTITIONS 57 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 58 #define MTDIDS_DEFAULT "nand0=vf610_nfc" 59 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ 60 "128k(vf-bcb)ro," \ 61 "1408k(u-boot)ro," \ 62 "512k(u-boot-env)," \ 63 "-(ubi)" 64 65 #define CONFIG_MMC 66 #define CONFIG_FSL_ESDHC 67 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 68 #define CONFIG_SYS_FSL_ESDHC_NUM 1 69 70 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 71 72 #define CONFIG_CMD_MMC 73 #define CONFIG_GENERIC_MMC 74 #define CONFIG_CMD_FAT 75 #define CONFIG_CMD_EXT3 76 #define CONFIG_CMD_EXT4 77 #define CONFIG_DOS_PARTITION 78 79 #define CONFIG_RBTREE 80 #define CONFIG_LZO 81 #define CONFIG_CMD_FS_GENERIC 82 #define CONFIG_CMD_BOOTZ 83 #define CONFIG_CMD_UBI 84 #define CONFIG_MTD_UBI_FASTMAP 85 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ 86 87 #define CONFIG_CMD_PING 88 #define CONFIG_CMD_DHCP 89 #define CONFIG_CMD_MII 90 #define CONFIG_FEC_MXC 91 #define CONFIG_MII 92 #define IMX_FEC_BASE ENET1_BASE_ADDR 93 #define CONFIG_FEC_XCV_TYPE RMII 94 #define CONFIG_FEC_MXC_PHYADDR 0 95 #define CONFIG_PHYLIB 96 #define CONFIG_PHY_MICREL 97 98 #define CONFIG_IPADDR 192.168.10.2 99 #define CONFIG_NETMASK 255.255.255.0 100 #define CONFIG_SERVERIP 192.168.10.1 101 102 #define CONFIG_BOOTDELAY 1 103 #define CONFIG_BOARD_LATE_INIT 104 105 #define CONFIG_LOADADDR 0x80008000 106 #define CONFIG_FDTADDR 0x84000000 107 108 /* We boot from the gfxRAM area of the OCRAM. */ 109 #define CONFIG_SYS_TEXT_BASE 0x3f408000 110 #define CONFIG_BOARD_SIZE_LIMIT 524288 111 112 #define SD_BOOTCMD \ 113 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 114 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 115 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 116 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 117 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 118 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 119 120 #define NFS_BOOTCMD \ 121 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 122 "nfsboot=run setup; " \ 123 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 124 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 125 "dhcp ${kernel_addr_r} && " \ 126 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 127 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 128 129 #define UBI_BOOTCMD \ 130 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 131 "ubi.fm_autoconvert=1\0" \ 132 "ubiboot=run setup; " \ 133 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 134 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 135 "ubi part ubi && ubifsmount ubi0:rootfs && " \ 136 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \ 137 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 138 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 139 140 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 141 142 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 143 144 #define CONFIG_EXTRA_ENV_SETTINGS \ 145 "kernel_addr_r=0x82000000\0" \ 146 "fdt_addr_r=0x84000000\0" \ 147 "kernel_file=zImage\0" \ 148 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 149 "fdt_board=eval-v3\0" \ 150 "defargs=\0" \ 151 "console=ttyLP0\0" \ 152 "setup=setenv setupargs " \ 153 "console=tty1 console=${console}" \ 154 ",${baudrate}n8 ${memargs}\0" \ 155 "setsdupdate=mmc rescan && set interface mmc && " \ 156 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 157 "source ${loadaddr}\0" \ 158 "setusbupdate=usb start && set interface usb && " \ 159 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 160 "source ${loadaddr}\0" \ 161 "setupdate=run setsdupdate || run setusbupdate\0" \ 162 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 163 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 164 SD_BOOTCMD \ 165 NFS_BOOTCMD \ 166 UBI_BOOTCMD 167 168 /* Miscellaneous configurable options */ 169 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 170 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 171 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 172 #undef CONFIG_AUTO_COMPLETE 173 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 174 #define CONFIG_SYS_PBSIZE \ 175 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 176 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 177 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 178 179 #define CONFIG_CMD_MEMTEST 180 #define CONFIG_SYS_MEMTEST_START 0x80010000 181 #define CONFIG_SYS_MEMTEST_END 0x87C00000 182 183 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 184 #define CONFIG_SYS_HZ 1000 185 #define CONFIG_CMDLINE_EDITING 186 187 /* 188 * Stack sizes 189 * The stack sizes are set up in start.S using the settings below 190 */ 191 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 192 193 /* Physical memory map */ 194 #define CONFIG_NR_DRAM_BANKS 1 195 #define PHYS_SDRAM (0x80000000) 196 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 197 198 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 199 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 200 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 201 202 #define CONFIG_SYS_INIT_SP_OFFSET \ 203 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 204 #define CONFIG_SYS_INIT_SP_ADDR \ 205 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 206 207 /* Environment organization */ 208 #define CONFIG_SYS_NO_FLASH 209 210 #ifdef CONFIG_ENV_IS_IN_MMC 211 #define CONFIG_SYS_MMC_ENV_DEV 0 212 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 213 #define CONFIG_ENV_SIZE (8 * 1024) 214 #endif 215 216 #ifdef CONFIG_ENV_IS_IN_NAND 217 #define CONFIG_ENV_SIZE (64 * 2048) 218 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 219 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 220 #endif 221 222 #define CONFIG_OF_LIBFDT 223 #define CONFIG_CMD_BOOTZ 224 225 #define CONFIG_SYS_NO_FLASH 226 227 #define CONFIG_SYS_CACHELINE_SIZE 32 228 229 /* USB Host Support */ 230 #define CONFIG_CMD_USB 231 #define CONFIG_USB_EHCI 232 #define CONFIG_USB_EHCI_VF 233 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 234 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 235 236 /* USB Client Support */ 237 #define CONFIG_USB_GADGET 238 #define CONFIG_CI_UDC 239 #define CONFIG_USB_GADGET_DUALSPEED 240 #define CONFIG_USB_GADGET_VBUS_DRAW 2 241 #define CONFIG_TRDX_VID 0x1B67 242 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 243 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 244 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 245 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 246 #define CONFIG_G_DNL_MANUFACTURER "Toradex" 247 #define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID 248 #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50 249 250 /* USB DFU */ 251 #define CONFIG_USB_GADGET_DOWNLOAD 252 #define CONFIG_CMD_DFU 253 #define CONFIG_USB_FUNCTION_DFU 254 #define CONFIG_DFU_NAND 255 #define CONFIG_DFU_MMC 256 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 257 258 /* USB Storage */ 259 #define CONFIG_USB_STORAGE 260 #define CONFIG_USB_FUNCTION_MASS_STORAGE 261 #define CONFIG_CMD_USB_MASS_STORAGE 262 263 #endif /* __CONFIG_H */ 264