xref: /openbmc/u-boot/include/configs/colibri_vf.h (revision 83bf0057)
1 /*
2  * Copyright 2015 Toradex, Inc.
3  *
4  * Configuration settings for the Toradex VF50/VF61 module.
5  *
6  * Based on vf610twr.h:
7  * Copyright 2013 Freescale Semiconductor, Inc.
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14 
15 #include <asm/arch/imx-regs.h>
16 
17 #define CONFIG_VF610
18 #define CONFIG_SYS_THUMB_BUILD
19 #define CONFIG_USE_ARCH_MEMCPY
20 #define CONFIG_USE_ARCH_MEMSET
21 #define CONFIG_SYS_FSL_CLK
22 
23 #define CONFIG_ARCH_MISC_INIT
24 #define CONFIG_DISPLAY_CPUINFO
25 #define CONFIG_DISPLAY_BOARDINFO
26 
27 #define CONFIG_SKIP_LOWLEVEL_INIT
28 
29 #define CONFIG_CMD_FUSE
30 #ifdef CONFIG_CMD_FUSE
31 #define CONFIG_MXC_OCOTP
32 #endif
33 
34 /* Size of malloc() pool */
35 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
36 
37 #define CONFIG_BOARD_EARLY_INIT_F
38 
39 #define CONFIG_FSL_LPUART
40 #define LPUART_BASE			UART0_BASE
41 
42 /* Allow to overwrite serial and ethaddr */
43 #define CONFIG_ENV_OVERWRITE
44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
45 #define CONFIG_VERSION_VARIABLE
46 #define CONFIG_SYS_UART_PORT		(0)
47 #define CONFIG_BAUDRATE			115200
48 #define CONFIG_CMD_ASKENV
49 
50 /* NAND support */
51 #define CONFIG_CMD_NAND
52 #define CONFIG_SYS_NAND_ONFI_DETECTION
53 #define CONFIG_SYS_MAX_NAND_DEVICE	1
54 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
55 
56 /* GPIO support */
57 #define CONFIG_DM_GPIO
58 #define CONFIG_CMD_GPIO
59 #define CONFIG_VYBRID_GPIO
60 
61 /* Dynamic MTD partition support */
62 #define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
63 #define CONFIG_MTD_PARTITIONS
64 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
65 #define MTDIDS_DEFAULT		"nand0=vf610_nfc"
66 #define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
67 				"128k(vf-bcb)ro,"		\
68 				"1408k(u-boot)ro,"		\
69 				"512k(u-boot-env),"		\
70 				"-(ubi)"
71 
72 #define CONFIG_MMC
73 #define CONFIG_FSL_ESDHC
74 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
75 #define CONFIG_SYS_FSL_ESDHC_NUM	1
76 
77 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
78 
79 #define CONFIG_CMD_MMC
80 #define CONFIG_GENERIC_MMC
81 #define CONFIG_CMD_FAT
82 #define CONFIG_CMD_EXT3
83 #define CONFIG_CMD_EXT4
84 #define CONFIG_DOS_PARTITION
85 
86 #define CONFIG_RBTREE
87 #define CONFIG_LZO
88 #define CONFIG_CMD_FS_GENERIC
89 #define CONFIG_CMD_BOOTZ
90 #define CONFIG_CMD_UBI
91 #define CONFIG_MTD_UBI_FASTMAP
92 #define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
93 
94 #define CONFIG_CMD_PING
95 #define CONFIG_CMD_DHCP
96 #define CONFIG_CMD_MII
97 #define CONFIG_FEC_MXC
98 #define CONFIG_MII
99 #define IMX_FEC_BASE			ENET1_BASE_ADDR
100 #define CONFIG_FEC_XCV_TYPE		RMII
101 #define CONFIG_FEC_MXC_PHYADDR          0
102 #define CONFIG_PHYLIB
103 #define CONFIG_PHY_MICREL
104 
105 #define CONFIG_IPADDR		192.168.10.2
106 #define CONFIG_NETMASK		255.255.255.0
107 #define CONFIG_SERVERIP		192.168.10.1
108 
109 #define CONFIG_BOOTDELAY		1
110 #define CONFIG_BOARD_LATE_INIT
111 
112 #define CONFIG_LOADADDR			0x80008000
113 #define CONFIG_FDTADDR			0x84000000
114 
115 /* We boot from the gfxRAM area of the OCRAM. */
116 #define CONFIG_SYS_TEXT_BASE		0x3f408000
117 #define CONFIG_BOARD_SIZE_LIMIT		524288
118 
119 #define SD_BOOTCMD \
120 	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
121 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
122 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
123 	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
124 	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
125 	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
126 
127 #define NFS_BOOTCMD \
128 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
129 	"nfsboot=run setup; " \
130 	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
131 	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
132 	"dhcp ${kernel_addr_r} && "	\
133 	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
134 	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
135 
136 #define UBI_BOOTCMD	\
137 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
138 	"ubi.fm_autoconvert=1\0" \
139 	"ubiboot=run setup; " \
140 	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
141 	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
142 	"ubi part ubi && ubifsmount ubi0:rootfs && " \
143 	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
144 	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
145 	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
146 
147 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
148 
149 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
150 
151 #define CONFIG_EXTRA_ENV_SETTINGS \
152 	"kernel_addr_r=0x82000000\0" \
153 	"fdt_addr_r=0x84000000\0" \
154 	"kernel_file=zImage\0" \
155 	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
156 	"fdt_board=eval-v3\0" \
157 	"defargs=\0" \
158 	"console=ttyLP0\0" \
159 	"setup=setenv setupargs " \
160 	"console=tty1 console=${console}" \
161 	",${baudrate}n8 ${memargs}\0" \
162 	"setsdupdate=mmc rescan && set interface mmc && " \
163 	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
164 	"source ${loadaddr}\0" \
165 	"setusbupdate=usb start && set interface usb && " \
166 	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
167 	"source ${loadaddr}\0" \
168 	"setupdate=run setsdupdate || run setusbupdate\0" \
169 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
170 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
171 	SD_BOOTCMD \
172 	NFS_BOOTCMD \
173 	UBI_BOOTCMD
174 
175 /* Miscellaneous configurable options */
176 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
177 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
178 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
179 #undef CONFIG_AUTO_COMPLETE
180 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
181 #define CONFIG_SYS_PBSIZE		\
182 			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
183 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
184 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
185 
186 #define CONFIG_CMD_MEMTEST
187 #define CONFIG_SYS_MEMTEST_START	0x80010000
188 #define CONFIG_SYS_MEMTEST_END		0x87C00000
189 
190 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
191 #define CONFIG_SYS_HZ			1000
192 #define CONFIG_CMDLINE_EDITING
193 
194 /*
195  * Stack sizes
196  * The stack sizes are set up in start.S using the settings below
197  */
198 #define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
199 
200 /* Physical memory map */
201 #define CONFIG_NR_DRAM_BANKS		1
202 #define PHYS_SDRAM			(0x80000000)
203 #define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)
204 
205 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
206 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
207 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
208 
209 #define CONFIG_SYS_INIT_SP_OFFSET \
210 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
211 #define CONFIG_SYS_INIT_SP_ADDR \
212 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
213 
214 /* Environment organization */
215 #define CONFIG_SYS_NO_FLASH
216 
217 #ifdef CONFIG_ENV_IS_IN_MMC
218 #define CONFIG_SYS_MMC_ENV_DEV		0
219 #define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
220 #define CONFIG_ENV_SIZE			(8 * 1024)
221 #endif
222 
223 #ifdef CONFIG_ENV_IS_IN_NAND
224 #define CONFIG_ENV_SIZE			(64 * 2048)
225 #define CONFIG_ENV_RANGE		(4 * 64 * 2048)
226 #define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
227 #endif
228 
229 #define CONFIG_OF_LIBFDT
230 #define CONFIG_CMD_BOOTZ
231 
232 #define CONFIG_SYS_NO_FLASH
233 
234 #define CONFIG_SYS_CACHELINE_SIZE 32
235 
236 /* USB Host Support */
237 #define CONFIG_CMD_USB
238 #define CONFIG_USB_EHCI
239 #define CONFIG_USB_EHCI_VF
240 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
241 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
242 
243 /* USB Client Support */
244 #define CONFIG_USB_GADGET
245 #define CONFIG_CI_UDC
246 #define CONFIG_USB_GADGET_DUALSPEED
247 #define CONFIG_USB_GADGET_VBUS_DRAW      2
248 #define CONFIG_TRDX_VID                  0x1B67
249 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
250 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
251 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
252 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
253 #define CONFIG_G_DNL_MANUFACTURER        "Toradex"
254 #define CONFIG_G_DNL_VENDOR_NUM          CONFIG_TRDX_VID
255 #define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50
256 
257 /* USB DFU */
258 #define CONFIG_USB_GADGET_DOWNLOAD
259 #define CONFIG_CMD_DFU
260 #define CONFIG_USB_FUNCTION_DFU
261 #define CONFIG_DFU_NAND
262 #define CONFIG_DFU_MMC
263 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
264 
265 /* USB Storage */
266 #define CONFIG_USB_STORAGE
267 #define CONFIG_USB_FUNCTION_MASS_STORAGE
268 #define CONFIG_CMD_USB_MASS_STORAGE
269 
270 /* Enable SPI support */
271 #ifdef CONFIG_OF_CONTROL
272 #define CONFIG_DM_SPI
273 #define CONFIG_CMD_SPI
274 #define CONFIG_FSL_DSPI
275 #endif
276 
277 #endif /* __CONFIG_H */
278