1 /* 2 * Copyright 2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 module. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #include <asm/arch/imx-regs.h> 16 #include <config_cmd_default.h> 17 18 #define CONFIG_VF610 19 #define CONFIG_SYS_THUMB_BUILD 20 #define CONFIG_USE_ARCH_MEMCPY 21 #define CONFIG_USE_ARCH_MEMSET 22 23 #define CONFIG_SYS_GENERIC_BOARD 24 #define CONFIG_ARCH_MISC_INIT 25 #define CONFIG_DISPLAY_CPUINFO 26 #define CONFIG_DISPLAY_BOARDINFO 27 28 #define CONFIG_SKIP_LOWLEVEL_INIT 29 30 #define CONFIG_CMD_FUSE 31 #ifdef CONFIG_CMD_FUSE 32 #define CONFIG_MXC_OCOTP 33 #endif 34 35 /* Size of malloc() pool */ 36 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 37 38 #define CONFIG_BOARD_EARLY_INIT_F 39 40 #define CONFIG_FSL_LPUART 41 #define LPUART_BASE UART0_BASE 42 43 /* Allow to overwrite serial and ethaddr */ 44 #define CONFIG_ENV_OVERWRITE 45 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 46 #define CONFIG_VERSION_VARIABLE 47 #define CONFIG_SYS_UART_PORT (0) 48 #define CONFIG_BAUDRATE 115200 49 #define CONFIG_CMD_ASKENV 50 51 /* NAND support */ 52 #define CONFIG_CMD_NAND 53 #define CONFIG_NAND_VF610_NFC 54 #define CONFIG_SYS_NAND_SELF_INIT 55 #define CONFIG_SYS_MAX_NAND_DEVICE 1 56 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 57 58 /* Dynamic MTD partition support */ 59 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ 60 #define CONFIG_MTD_PARTITIONS 61 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 62 #define MTDIDS_DEFAULT "nand0=vf610_nfc" 63 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ 64 "128k(vf-bcb)ro," \ 65 "1408k(u-boot)ro," \ 66 "512k(u-boot-env)," \ 67 "-(ubi)" 68 69 #undef CONFIG_CMD_IMLS 70 71 #define CONFIG_MMC 72 #define CONFIG_FSL_ESDHC 73 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 74 #define CONFIG_SYS_FSL_ESDHC_NUM 1 75 76 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 77 78 #define CONFIG_CMD_MMC 79 #define CONFIG_GENERIC_MMC 80 #define CONFIG_CMD_FAT 81 #define CONFIG_CMD_EXT3 82 #define CONFIG_CMD_EXT4 83 #define CONFIG_DOS_PARTITION 84 85 #define CONFIG_RBTREE 86 #define CONFIG_LZO 87 #define CONFIG_CMD_FS_GENERIC 88 #define CONFIG_CMD_BOOTZ 89 #define CONFIG_CMD_UBI 90 #define CONFIG_MTD_UBI_FASTMAP 91 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ 92 93 #define CONFIG_CMD_PING 94 #define CONFIG_CMD_DHCP 95 #define CONFIG_CMD_MII 96 #define CONFIG_CMD_NET 97 #define CONFIG_FEC_MXC 98 #define CONFIG_MII 99 #define IMX_FEC_BASE ENET1_BASE_ADDR 100 #define CONFIG_FEC_XCV_TYPE RMII 101 #define CONFIG_FEC_MXC_PHYADDR 0 102 #define CONFIG_PHYLIB 103 #define CONFIG_PHY_MICREL 104 105 #define CONFIG_IPADDR 192.168.10.2 106 #define CONFIG_NETMASK 255.255.255.0 107 #define CONFIG_SERVERIP 192.168.10.1 108 109 #define CONFIG_BOOTDELAY 1 110 #define CONFIG_BOARD_LATE_INIT 111 112 #define CONFIG_LOADADDR 0x80008000 113 #define CONFIG_FDTADDR 0x84000000 114 115 /* We boot from the gfxRAM area of the OCRAM. */ 116 #define CONFIG_SYS_TEXT_BASE 0x3f408000 117 #define CONFIG_BOARD_SIZE_LIMIT 524288 118 119 #define SD_BOOTCMD \ 120 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 121 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 122 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 123 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 124 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 125 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 126 127 #define NFS_BOOTCMD \ 128 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 129 "nfsboot=run setup; " \ 130 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 131 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 132 "dhcp ${kernel_addr_r} && " \ 133 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 134 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 135 136 #define UBI_BOOTCMD \ 137 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 138 "ubi.fm_autoconvert=1\0" \ 139 "ubiboot=run setup; " \ 140 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 141 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 142 "ubi part ubi && ubifsmount ubi0:rootfs && " \ 143 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \ 144 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 145 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 146 147 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 148 149 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 150 151 #define CONFIG_EXTRA_ENV_SETTINGS \ 152 "kernel_addr_r=0x82000000\0" \ 153 "fdt_addr_r=0x84000000\0" \ 154 "kernel_file=zImage\0" \ 155 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 156 "fdt_board=eval-v3\0" \ 157 "defargs=\0" \ 158 "console=ttyLP0\0" \ 159 "setup=setenv setupargs " \ 160 "console=tty1 console=${console}" \ 161 ",${baudrate}n8 ${memargs}\0" \ 162 "setsdupdate=mmc rescan && set interface mmc && " \ 163 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 164 "source ${loadaddr}\0" \ 165 "setusbupdate=usb start && set interface usb && " \ 166 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 167 "source ${loadaddr}\0" \ 168 "setupdate=run setsdupdate || run setusbupdate\0" \ 169 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 170 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 171 SD_BOOTCMD \ 172 NFS_BOOTCMD \ 173 UBI_BOOTCMD 174 175 /* Miscellaneous configurable options */ 176 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 177 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 178 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 179 #define CONFIG_SYS_PROMPT "Colibri VFxx # " 180 #undef CONFIG_AUTO_COMPLETE 181 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 182 #define CONFIG_SYS_PBSIZE \ 183 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 184 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 185 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 186 187 #define CONFIG_CMD_MEMTEST 188 #define CONFIG_SYS_MEMTEST_START 0x80010000 189 #define CONFIG_SYS_MEMTEST_END 0x87C00000 190 191 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 192 #define CONFIG_SYS_HZ 1000 193 #define CONFIG_CMDLINE_EDITING 194 195 /* 196 * Stack sizes 197 * The stack sizes are set up in start.S using the settings below 198 */ 199 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 200 201 /* Physical memory map */ 202 #define CONFIG_NR_DRAM_BANKS 1 203 #define PHYS_SDRAM (0x80000000) 204 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 205 206 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 207 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 208 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 209 210 #define CONFIG_SYS_INIT_SP_OFFSET \ 211 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 212 #define CONFIG_SYS_INIT_SP_ADDR \ 213 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 214 215 /* Environment organization */ 216 #define CONFIG_SYS_NO_FLASH 217 218 #ifdef CONFIG_ENV_IS_IN_MMC 219 #define CONFIG_SYS_MMC_ENV_DEV 0 220 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 221 #define CONFIG_ENV_SIZE (8 * 1024) 222 #endif 223 224 #ifdef CONFIG_ENV_IS_IN_NAND 225 #define CONFIG_ENV_SIZE (64 * 2048) 226 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 227 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 228 #endif 229 230 #define CONFIG_OF_LIBFDT 231 #define CONFIG_CMD_BOOTZ 232 233 #define CONFIG_SYS_NO_FLASH 234 235 #define CONFIG_SYS_CACHELINE_SIZE 32 236 237 /* USB Host Support */ 238 #define CONFIG_CMD_USB 239 #define CONFIG_USB_EHCI 240 #define CONFIG_USB_EHCI_VF 241 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 242 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 243 244 /* USB Client Support */ 245 #define CONFIG_USB_GADGET 246 #define CONFIG_CI_UDC 247 #define CONFIG_USB_GADGET_DUALSPEED 248 #define CONFIG_USB_GADGET_VBUS_DRAW 2 249 #define CONFIG_TRDX_VID 0x1B67 250 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 251 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 252 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 253 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 254 #define CONFIG_G_DNL_MANUFACTURER "Toradex" 255 #define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID 256 #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50 257 258 /* USB DFU */ 259 #define CONFIG_USBDOWNLOAD_GADGET 260 #define CONFIG_CMD_DFU 261 #define CONFIG_DFU_FUNCTION 262 #define CONFIG_DFU_NAND 263 #define CONFIG_DFU_MMC 264 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 265 266 /* USB Storage */ 267 #define CONFIG_USB_STORAGE 268 #define CONFIG_USB_GADGET_MASS_STORAGE 269 #define CONFIG_CMD_USB_MASS_STORAGE 270 271 #endif /* __CONFIG_H */ 272