1 /* 2 * Copyright 2015-2016 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 modules. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #include <asm/arch/imx-regs.h> 16 17 #define CONFIG_SYS_FSL_CLK 18 19 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ 20 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 23 #ifdef CONFIG_CMD_FUSE 24 #define CONFIG_MXC_OCOTP 25 #endif 26 27 #ifdef CONFIG_VIDEO_FSL_DCU_FB 28 #define CONFIG_SPLASH_SCREEN_ALIGN 29 #define CONFIG_VIDEO_LOGO 30 #define CONFIG_VIDEO_BMP_LOGO 31 #define CONFIG_SYS_FSL_DCU_LE 32 33 #define CONFIG_SYS_DCU_ADDR DCU0_BASE_ADDR 34 #define DCU_LAYER_MAX_NUM 64 35 #endif 36 37 /* Size of malloc() pool */ 38 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 39 40 /* Allow to overwrite serial and ethaddr */ 41 #define CONFIG_ENV_OVERWRITE 42 #define CONFIG_ENV_VARS_UBOOT_CONFIG 43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 44 45 /* NAND support */ 46 #define CONFIG_SYS_NAND_ONFI_DETECTION 47 #define CONFIG_SYS_MAX_NAND_DEVICE 1 48 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 49 50 /* Dynamic MTD partition support */ 51 #define CONFIG_MTD_PARTITIONS 52 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 53 54 #define CONFIG_FSL_ESDHC 55 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 56 #define CONFIG_SYS_FSL_ESDHC_NUM 1 57 58 #define CONFIG_FEC_MXC 59 #define CONFIG_MII 60 #define IMX_FEC_BASE ENET1_BASE_ADDR 61 #define CONFIG_FEC_XCV_TYPE RMII 62 #define CONFIG_FEC_MXC_PHYADDR 0 63 64 #define CONFIG_IPADDR 192.168.10.2 65 #define CONFIG_NETMASK 255.255.255.0 66 #define CONFIG_SERVERIP 192.168.10.1 67 68 #define CONFIG_LOADADDR 0x80008000 69 #define CONFIG_FDTADDR 0x84000000 70 71 /* We boot from the gfxRAM area of the OCRAM. */ 72 #define CONFIG_SYS_TEXT_BASE 0x3f401000 73 #define CONFIG_BOARD_SIZE_LIMIT 520192 74 75 #define SD_BOOTCMD \ 76 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 77 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 78 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 79 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 80 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 81 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 82 83 #define NFS_BOOTCMD \ 84 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 85 "nfsboot=run setup; " \ 86 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 87 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 88 "dhcp ${kernel_addr_r} && " \ 89 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 90 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 91 92 #define UBI_BOOTCMD \ 93 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 94 "ubi.fm_autoconvert=1\0" \ 95 "ubiboot=run setup; " \ 96 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 97 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 98 "ubi part ubi && " \ 99 "ubi read ${kernel_addr_r} kernel && " \ 100 "ubi read ${fdt_addr_r} dtb && " \ 101 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 102 103 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 104 105 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 106 107 #define CONFIG_EXTRA_ENV_SETTINGS \ 108 "kernel_addr_r=0x82000000\0" \ 109 "fdt_addr_r=0x84000000\0" \ 110 "kernel_file=zImage\0" \ 111 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 112 "fdt_board=eval-v3\0" \ 113 "fdt_fixup=;\0" \ 114 "defargs=\0" \ 115 "console=ttyLP0\0" \ 116 "setup=setenv setupargs " \ 117 "console=tty1 console=${console}" \ 118 ",${baudrate}n8 ${memargs}\0" \ 119 "setsdupdate=mmc rescan && set interface mmc && " \ 120 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 121 "source ${loadaddr}\0" \ 122 "setusbupdate=usb start && set interface usb && " \ 123 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 124 "source ${loadaddr}\0" \ 125 "setupdate=run setsdupdate || run setusbupdate\0" \ 126 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 127 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 128 "video-mode=dcufb:640x480-16@60,monitor=lcd\0" \ 129 "splashpos=m,m\0" \ 130 SD_BOOTCMD \ 131 NFS_BOOTCMD \ 132 UBI_BOOTCMD 133 134 /* Miscellaneous configurable options */ 135 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 136 #undef CONFIG_AUTO_COMPLETE 137 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 138 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 139 140 #define CONFIG_SYS_MEMTEST_START 0x80010000 141 #define CONFIG_SYS_MEMTEST_END 0x87C00000 142 143 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 144 #define CONFIG_SYS_HZ 1000 145 #define CONFIG_CMDLINE_EDITING 146 147 /* Physical memory map */ 148 #define CONFIG_NR_DRAM_BANKS 1 149 #define PHYS_SDRAM (0x80000000) 150 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 151 152 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 153 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 154 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 155 156 #define CONFIG_SYS_INIT_SP_OFFSET \ 157 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 158 #define CONFIG_SYS_INIT_SP_ADDR \ 159 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 160 161 /* Environment organization */ 162 163 #ifdef CONFIG_ENV_IS_IN_MMC 164 #define CONFIG_SYS_MMC_ENV_DEV 0 165 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 166 #define CONFIG_ENV_SIZE (8 * 1024) 167 #endif 168 169 #ifdef CONFIG_ENV_IS_IN_NAND 170 #define CONFIG_ENV_SIZE (64 * 2048) 171 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 172 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 173 #endif 174 175 /* USB Host Support */ 176 #define CONFIG_USB_EHCI_VF 177 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 178 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 179 180 /* USB DFU */ 181 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 182 183 /* USB Storage */ 184 #define CONFIG_USB_FUNCTION_MASS_STORAGE 185 186 #endif /* __CONFIG_H */ 187