1 /* 2 * Copyright 2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 module. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #include <asm/arch/imx-regs.h> 16 17 #define CONFIG_VF610 18 #define CONFIG_SYS_THUMB_BUILD 19 #define CONFIG_USE_ARCH_MEMCPY 20 #define CONFIG_USE_ARCH_MEMSET 21 22 #define CONFIG_SYS_GENERIC_BOARD 23 #define CONFIG_ARCH_MISC_INIT 24 #define CONFIG_DISPLAY_CPUINFO 25 #define CONFIG_DISPLAY_BOARDINFO 26 27 #define CONFIG_SKIP_LOWLEVEL_INIT 28 29 #define CONFIG_CMD_FUSE 30 #ifdef CONFIG_CMD_FUSE 31 #define CONFIG_MXC_OCOTP 32 #endif 33 34 /* Size of malloc() pool */ 35 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 36 37 #define CONFIG_BOARD_EARLY_INIT_F 38 39 #define CONFIG_FSL_LPUART 40 #define LPUART_BASE UART0_BASE 41 42 /* Allow to overwrite serial and ethaddr */ 43 #define CONFIG_ENV_OVERWRITE 44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 45 #define CONFIG_VERSION_VARIABLE 46 #define CONFIG_SYS_UART_PORT (0) 47 #define CONFIG_BAUDRATE 115200 48 #define CONFIG_CMD_ASKENV 49 50 /* NAND support */ 51 #define CONFIG_CMD_NAND 52 #define CONFIG_SYS_NAND_ONFI_DETECTION 53 #define CONFIG_SYS_MAX_NAND_DEVICE 1 54 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 55 56 /* GPIO support */ 57 #define CONFIG_DM_GPIO 58 #define CONFIG_CMD_GPIO 59 #define CONFIG_VYBRID_GPIO 60 61 /* Dynamic MTD partition support */ 62 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ 63 #define CONFIG_MTD_PARTITIONS 64 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 65 #define MTDIDS_DEFAULT "nand0=vf610_nfc" 66 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ 67 "128k(vf-bcb)ro," \ 68 "1408k(u-boot)ro," \ 69 "512k(u-boot-env)," \ 70 "-(ubi)" 71 72 73 #define CONFIG_MMC 74 #define CONFIG_FSL_ESDHC 75 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 76 #define CONFIG_SYS_FSL_ESDHC_NUM 1 77 78 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 79 80 #define CONFIG_CMD_MMC 81 #define CONFIG_GENERIC_MMC 82 #define CONFIG_CMD_FAT 83 #define CONFIG_CMD_EXT3 84 #define CONFIG_CMD_EXT4 85 #define CONFIG_DOS_PARTITION 86 87 #define CONFIG_RBTREE 88 #define CONFIG_LZO 89 #define CONFIG_CMD_FS_GENERIC 90 #define CONFIG_CMD_BOOTZ 91 #define CONFIG_CMD_UBI 92 #define CONFIG_MTD_UBI_FASTMAP 93 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ 94 95 #define CONFIG_CMD_PING 96 #define CONFIG_CMD_DHCP 97 #define CONFIG_CMD_MII 98 #define CONFIG_FEC_MXC 99 #define CONFIG_MII 100 #define IMX_FEC_BASE ENET1_BASE_ADDR 101 #define CONFIG_FEC_XCV_TYPE RMII 102 #define CONFIG_FEC_MXC_PHYADDR 0 103 #define CONFIG_PHYLIB 104 #define CONFIG_PHY_MICREL 105 106 #define CONFIG_IPADDR 192.168.10.2 107 #define CONFIG_NETMASK 255.255.255.0 108 #define CONFIG_SERVERIP 192.168.10.1 109 110 #define CONFIG_BOOTDELAY 1 111 #define CONFIG_BOARD_LATE_INIT 112 113 #define CONFIG_LOADADDR 0x80008000 114 #define CONFIG_FDTADDR 0x84000000 115 116 /* We boot from the gfxRAM area of the OCRAM. */ 117 #define CONFIG_SYS_TEXT_BASE 0x3f408000 118 #define CONFIG_BOARD_SIZE_LIMIT 524288 119 120 #define SD_BOOTCMD \ 121 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 122 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 123 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 124 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 125 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 126 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 127 128 #define NFS_BOOTCMD \ 129 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 130 "nfsboot=run setup; " \ 131 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 132 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 133 "dhcp ${kernel_addr_r} && " \ 134 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 135 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 136 137 #define UBI_BOOTCMD \ 138 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 139 "ubi.fm_autoconvert=1\0" \ 140 "ubiboot=run setup; " \ 141 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 142 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 143 "ubi part ubi && ubifsmount ubi0:rootfs && " \ 144 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \ 145 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 146 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 147 148 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 149 150 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 151 152 #define CONFIG_EXTRA_ENV_SETTINGS \ 153 "kernel_addr_r=0x82000000\0" \ 154 "fdt_addr_r=0x84000000\0" \ 155 "kernel_file=zImage\0" \ 156 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 157 "fdt_board=eval-v3\0" \ 158 "defargs=\0" \ 159 "console=ttyLP0\0" \ 160 "setup=setenv setupargs " \ 161 "console=tty1 console=${console}" \ 162 ",${baudrate}n8 ${memargs}\0" \ 163 "setsdupdate=mmc rescan && set interface mmc && " \ 164 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 165 "source ${loadaddr}\0" \ 166 "setusbupdate=usb start && set interface usb && " \ 167 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 168 "source ${loadaddr}\0" \ 169 "setupdate=run setsdupdate || run setusbupdate\0" \ 170 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 171 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 172 SD_BOOTCMD \ 173 NFS_BOOTCMD \ 174 UBI_BOOTCMD 175 176 /* Miscellaneous configurable options */ 177 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 178 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 179 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 180 #define CONFIG_SYS_PROMPT "Colibri VFxx # " 181 #undef CONFIG_AUTO_COMPLETE 182 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 183 #define CONFIG_SYS_PBSIZE \ 184 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 185 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 186 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 187 188 #define CONFIG_CMD_MEMTEST 189 #define CONFIG_SYS_MEMTEST_START 0x80010000 190 #define CONFIG_SYS_MEMTEST_END 0x87C00000 191 192 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 193 #define CONFIG_SYS_HZ 1000 194 #define CONFIG_CMDLINE_EDITING 195 196 /* 197 * Stack sizes 198 * The stack sizes are set up in start.S using the settings below 199 */ 200 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 201 202 /* Physical memory map */ 203 #define CONFIG_NR_DRAM_BANKS 1 204 #define PHYS_SDRAM (0x80000000) 205 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 206 207 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 208 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 209 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 210 211 #define CONFIG_SYS_INIT_SP_OFFSET \ 212 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 213 #define CONFIG_SYS_INIT_SP_ADDR \ 214 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 215 216 /* Environment organization */ 217 #define CONFIG_SYS_NO_FLASH 218 219 #ifdef CONFIG_ENV_IS_IN_MMC 220 #define CONFIG_SYS_MMC_ENV_DEV 0 221 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 222 #define CONFIG_ENV_SIZE (8 * 1024) 223 #endif 224 225 #ifdef CONFIG_ENV_IS_IN_NAND 226 #define CONFIG_ENV_SIZE (64 * 2048) 227 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 228 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 229 #endif 230 231 #define CONFIG_OF_LIBFDT 232 #define CONFIG_CMD_BOOTZ 233 234 #define CONFIG_SYS_NO_FLASH 235 236 #define CONFIG_SYS_CACHELINE_SIZE 32 237 238 /* USB Host Support */ 239 #define CONFIG_CMD_USB 240 #define CONFIG_USB_EHCI 241 #define CONFIG_USB_EHCI_VF 242 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 243 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 244 245 /* USB Client Support */ 246 #define CONFIG_USB_GADGET 247 #define CONFIG_CI_UDC 248 #define CONFIG_USB_GADGET_DUALSPEED 249 #define CONFIG_USB_GADGET_VBUS_DRAW 2 250 #define CONFIG_TRDX_VID 0x1B67 251 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 252 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 253 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 254 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 255 #define CONFIG_G_DNL_MANUFACTURER "Toradex" 256 #define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID 257 #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50 258 259 /* USB DFU */ 260 #define CONFIG_USBDOWNLOAD_GADGET 261 #define CONFIG_CMD_DFU 262 #define CONFIG_DFU_FUNCTION 263 #define CONFIG_DFU_NAND 264 #define CONFIG_DFU_MMC 265 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 266 267 /* USB Storage */ 268 #define CONFIG_USB_STORAGE 269 #define CONFIG_USB_GADGET_MASS_STORAGE 270 #define CONFIG_CMD_USB_MASS_STORAGE 271 272 /* Enable SPI support */ 273 #ifdef CONFIG_OF_CONTROL 274 #define CONFIG_DM_SPI 275 #define CONFIG_CMD_SPI 276 #define CONFIG_FSL_DSPI 277 #endif 278 279 #endif /* __CONFIG_H */ 280