1 /* 2 * Copyright 2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 module. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #include <asm/arch/imx-regs.h> 16 17 #define CONFIG_VF610 18 #define CONFIG_SYS_THUMB_BUILD 19 #define CONFIG_USE_ARCH_MEMCPY 20 #define CONFIG_USE_ARCH_MEMSET 21 #define CONFIG_SYS_FSL_CLK 22 23 #define CONFIG_ARCH_MISC_INIT 24 #define CONFIG_DISPLAY_CPUINFO 25 #define CONFIG_DISPLAY_BOARDINFO 26 27 #define CONFIG_SKIP_LOWLEVEL_INIT 28 29 #define CONFIG_CMD_FUSE 30 #ifdef CONFIG_CMD_FUSE 31 #define CONFIG_MXC_OCOTP 32 #endif 33 34 /* Size of malloc() pool */ 35 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 36 37 #define CONFIG_BOARD_EARLY_INIT_F 38 39 #define CONFIG_FSL_LPUART 40 #define LPUART_BASE UART0_BASE 41 42 /* Allow to overwrite serial and ethaddr */ 43 #define CONFIG_ENV_OVERWRITE 44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 45 #define CONFIG_VERSION_VARIABLE 46 #define CONFIG_SYS_UART_PORT (0) 47 #define CONFIG_BAUDRATE 115200 48 #define CONFIG_CMD_ASKENV 49 50 /* NAND support */ 51 #define CONFIG_CMD_NAND 52 #define CONFIG_SYS_NAND_ONFI_DETECTION 53 #define CONFIG_SYS_MAX_NAND_DEVICE 1 54 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 55 56 /* GPIO support */ 57 #define CONFIG_DM_GPIO 58 #define CONFIG_VYBRID_GPIO 59 60 /* Dynamic MTD partition support */ 61 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ 62 #define CONFIG_MTD_PARTITIONS 63 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 64 #define MTDIDS_DEFAULT "nand0=vf610_nfc" 65 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ 66 "128k(vf-bcb)ro," \ 67 "1408k(u-boot)ro," \ 68 "512k(u-boot-env)," \ 69 "-(ubi)" 70 71 #define CONFIG_MMC 72 #define CONFIG_FSL_ESDHC 73 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 74 #define CONFIG_SYS_FSL_ESDHC_NUM 1 75 76 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 77 78 #define CONFIG_CMD_MMC 79 #define CONFIG_GENERIC_MMC 80 #define CONFIG_CMD_FAT 81 #define CONFIG_CMD_EXT3 82 #define CONFIG_CMD_EXT4 83 #define CONFIG_DOS_PARTITION 84 85 #define CONFIG_RBTREE 86 #define CONFIG_LZO 87 #define CONFIG_CMD_FS_GENERIC 88 #define CONFIG_CMD_BOOTZ 89 #define CONFIG_CMD_UBI 90 #define CONFIG_MTD_UBI_FASTMAP 91 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ 92 93 #define CONFIG_CMD_PING 94 #define CONFIG_CMD_DHCP 95 #define CONFIG_CMD_MII 96 #define CONFIG_FEC_MXC 97 #define CONFIG_MII 98 #define IMX_FEC_BASE ENET1_BASE_ADDR 99 #define CONFIG_FEC_XCV_TYPE RMII 100 #define CONFIG_FEC_MXC_PHYADDR 0 101 #define CONFIG_PHYLIB 102 #define CONFIG_PHY_MICREL 103 104 #define CONFIG_IPADDR 192.168.10.2 105 #define CONFIG_NETMASK 255.255.255.0 106 #define CONFIG_SERVERIP 192.168.10.1 107 108 #define CONFIG_BOOTDELAY 1 109 #define CONFIG_BOARD_LATE_INIT 110 111 #define CONFIG_LOADADDR 0x80008000 112 #define CONFIG_FDTADDR 0x84000000 113 114 /* We boot from the gfxRAM area of the OCRAM. */ 115 #define CONFIG_SYS_TEXT_BASE 0x3f408000 116 #define CONFIG_BOARD_SIZE_LIMIT 524288 117 118 #define SD_BOOTCMD \ 119 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 120 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 121 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 122 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 123 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 124 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 125 126 #define NFS_BOOTCMD \ 127 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 128 "nfsboot=run setup; " \ 129 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 130 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 131 "dhcp ${kernel_addr_r} && " \ 132 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 133 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 134 135 #define UBI_BOOTCMD \ 136 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 137 "ubi.fm_autoconvert=1\0" \ 138 "ubiboot=run setup; " \ 139 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 140 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 141 "ubi part ubi && ubifsmount ubi0:rootfs && " \ 142 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \ 143 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 144 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 145 146 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 147 148 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 149 150 #define CONFIG_EXTRA_ENV_SETTINGS \ 151 "kernel_addr_r=0x82000000\0" \ 152 "fdt_addr_r=0x84000000\0" \ 153 "kernel_file=zImage\0" \ 154 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 155 "fdt_board=eval-v3\0" \ 156 "defargs=\0" \ 157 "console=ttyLP0\0" \ 158 "setup=setenv setupargs " \ 159 "console=tty1 console=${console}" \ 160 ",${baudrate}n8 ${memargs}\0" \ 161 "setsdupdate=mmc rescan && set interface mmc && " \ 162 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 163 "source ${loadaddr}\0" \ 164 "setusbupdate=usb start && set interface usb && " \ 165 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 166 "source ${loadaddr}\0" \ 167 "setupdate=run setsdupdate || run setusbupdate\0" \ 168 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 169 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 170 SD_BOOTCMD \ 171 NFS_BOOTCMD \ 172 UBI_BOOTCMD 173 174 /* Miscellaneous configurable options */ 175 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 176 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 177 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 178 #undef CONFIG_AUTO_COMPLETE 179 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 180 #define CONFIG_SYS_PBSIZE \ 181 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 182 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 183 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 184 185 #define CONFIG_CMD_MEMTEST 186 #define CONFIG_SYS_MEMTEST_START 0x80010000 187 #define CONFIG_SYS_MEMTEST_END 0x87C00000 188 189 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 190 #define CONFIG_SYS_HZ 1000 191 #define CONFIG_CMDLINE_EDITING 192 193 /* 194 * Stack sizes 195 * The stack sizes are set up in start.S using the settings below 196 */ 197 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 198 199 /* Physical memory map */ 200 #define CONFIG_NR_DRAM_BANKS 1 201 #define PHYS_SDRAM (0x80000000) 202 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 203 204 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 205 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 206 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 207 208 #define CONFIG_SYS_INIT_SP_OFFSET \ 209 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 210 #define CONFIG_SYS_INIT_SP_ADDR \ 211 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 212 213 /* Environment organization */ 214 #define CONFIG_SYS_NO_FLASH 215 216 #ifdef CONFIG_ENV_IS_IN_MMC 217 #define CONFIG_SYS_MMC_ENV_DEV 0 218 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 219 #define CONFIG_ENV_SIZE (8 * 1024) 220 #endif 221 222 #ifdef CONFIG_ENV_IS_IN_NAND 223 #define CONFIG_ENV_SIZE (64 * 2048) 224 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 225 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 226 #endif 227 228 #define CONFIG_OF_LIBFDT 229 #define CONFIG_CMD_BOOTZ 230 231 #define CONFIG_SYS_NO_FLASH 232 233 #define CONFIG_SYS_CACHELINE_SIZE 32 234 235 /* USB Host Support */ 236 #define CONFIG_CMD_USB 237 #define CONFIG_USB_EHCI 238 #define CONFIG_USB_EHCI_VF 239 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 240 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 241 242 /* USB Client Support */ 243 #define CONFIG_USB_GADGET 244 #define CONFIG_CI_UDC 245 #define CONFIG_USB_GADGET_DUALSPEED 246 #define CONFIG_USB_GADGET_VBUS_DRAW 2 247 #define CONFIG_TRDX_VID 0x1B67 248 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 249 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 250 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 251 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 252 #define CONFIG_G_DNL_MANUFACTURER "Toradex" 253 #define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID 254 #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50 255 256 /* USB DFU */ 257 #define CONFIG_USB_GADGET_DOWNLOAD 258 #define CONFIG_CMD_DFU 259 #define CONFIG_USB_FUNCTION_DFU 260 #define CONFIG_DFU_NAND 261 #define CONFIG_DFU_MMC 262 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 263 264 /* USB Storage */ 265 #define CONFIG_USB_STORAGE 266 #define CONFIG_USB_FUNCTION_MASS_STORAGE 267 #define CONFIG_CMD_USB_MASS_STORAGE 268 269 /* Enable SPI support */ 270 #ifdef CONFIG_OF_CONTROL 271 #define CONFIG_DM_SPI 272 #define CONFIG_CMD_SPI 273 #endif 274 275 #endif /* __CONFIG_H */ 276