1 /* 2 * Copyright 2015-2016 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 modules. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #include <asm/arch/imx-regs.h> 16 17 #define CONFIG_SYS_FSL_CLK 18 19 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ 20 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 23 #define CONFIG_CMD_FUSE 24 #ifdef CONFIG_CMD_FUSE 25 #define CONFIG_MXC_OCOTP 26 #endif 27 28 #ifdef CONFIG_VIDEO_FSL_DCU_FB 29 #define CONFIG_SPLASH_SCREEN_ALIGN 30 #define CONFIG_VIDEO_LOGO 31 #define CONFIG_VIDEO_BMP_LOGO 32 #define CONFIG_SYS_FSL_DCU_LE 33 34 #define CONFIG_SYS_DCU_ADDR DCU0_BASE_ADDR 35 #define DCU_LAYER_MAX_NUM 64 36 #endif 37 38 /* Size of malloc() pool */ 39 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 40 41 /* Allow to overwrite serial and ethaddr */ 42 #define CONFIG_ENV_OVERWRITE 43 #define CONFIG_ENV_VARS_UBOOT_CONFIG 44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 45 46 /* NAND support */ 47 #define CONFIG_CMD_NAND 48 #define CONFIG_SYS_NAND_ONFI_DETECTION 49 #define CONFIG_SYS_MAX_NAND_DEVICE 1 50 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 51 52 /* Dynamic MTD partition support */ 53 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ 54 #define CONFIG_MTD_PARTITIONS 55 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 56 #define MTDIDS_DEFAULT "nand0=vf610_nfc" 57 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ 58 "128k(vf-bcb)ro," \ 59 "1408k(u-boot)ro," \ 60 "512k(u-boot-env)," \ 61 "-(ubi)" 62 63 #define CONFIG_FSL_ESDHC 64 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 65 #define CONFIG_SYS_FSL_ESDHC_NUM 1 66 67 #define CONFIG_RBTREE 68 #define CONFIG_LZO 69 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ 70 71 #define CONFIG_FEC_MXC 72 #define CONFIG_MII 73 #define IMX_FEC_BASE ENET1_BASE_ADDR 74 #define CONFIG_FEC_XCV_TYPE RMII 75 #define CONFIG_FEC_MXC_PHYADDR 0 76 #define CONFIG_PHYLIB 77 #define CONFIG_PHY_MICREL 78 79 #define CONFIG_IPADDR 192.168.10.2 80 #define CONFIG_NETMASK 255.255.255.0 81 #define CONFIG_SERVERIP 192.168.10.1 82 83 #define CONFIG_LOADADDR 0x80008000 84 #define CONFIG_FDTADDR 0x84000000 85 86 /* We boot from the gfxRAM area of the OCRAM. */ 87 #define CONFIG_SYS_TEXT_BASE 0x3f408000 88 #define CONFIG_BOARD_SIZE_LIMIT 524288 89 90 #define SD_BOOTCMD \ 91 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 92 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 93 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 94 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 95 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 96 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 97 98 #define NFS_BOOTCMD \ 99 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 100 "nfsboot=run setup; " \ 101 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 102 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 103 "dhcp ${kernel_addr_r} && " \ 104 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 105 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 106 107 #define UBI_BOOTCMD \ 108 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 109 "ubi.fm_autoconvert=1\0" \ 110 "ubiboot=run setup; " \ 111 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 112 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 113 "ubi part ubi && " \ 114 "ubi read ${kernel_addr_r} kernel && " \ 115 "ubi read ${fdt_addr_r} dtb && " \ 116 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 117 118 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 119 120 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 121 122 #define CONFIG_EXTRA_ENV_SETTINGS \ 123 "kernel_addr_r=0x82000000\0" \ 124 "fdt_addr_r=0x84000000\0" \ 125 "kernel_file=zImage\0" \ 126 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 127 "fdt_board=eval-v3\0" \ 128 "fdt_fixup=;\0" \ 129 "defargs=\0" \ 130 "console=ttyLP0\0" \ 131 "setup=setenv setupargs " \ 132 "console=tty1 console=${console}" \ 133 ",${baudrate}n8 ${memargs}\0" \ 134 "setsdupdate=mmc rescan && set interface mmc && " \ 135 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 136 "source ${loadaddr}\0" \ 137 "setusbupdate=usb start && set interface usb && " \ 138 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 139 "source ${loadaddr}\0" \ 140 "setupdate=run setsdupdate || run setusbupdate\0" \ 141 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 142 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 143 "video-mode=dcufb:640x480-16@60,monitor=lcd\0" \ 144 "splashpos=m,m\0" \ 145 SD_BOOTCMD \ 146 NFS_BOOTCMD \ 147 UBI_BOOTCMD 148 149 /* Miscellaneous configurable options */ 150 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 151 #undef CONFIG_AUTO_COMPLETE 152 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 153 #define CONFIG_SYS_PBSIZE \ 154 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 155 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 156 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 157 158 #define CONFIG_SYS_MEMTEST_START 0x80010000 159 #define CONFIG_SYS_MEMTEST_END 0x87C00000 160 161 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 162 #define CONFIG_SYS_HZ 1000 163 #define CONFIG_CMDLINE_EDITING 164 165 /* Physical memory map */ 166 #define CONFIG_NR_DRAM_BANKS 1 167 #define PHYS_SDRAM (0x80000000) 168 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 169 170 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 171 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 172 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 173 174 #define CONFIG_SYS_INIT_SP_OFFSET \ 175 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 176 #define CONFIG_SYS_INIT_SP_ADDR \ 177 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 178 179 /* Environment organization */ 180 181 #ifdef CONFIG_ENV_IS_IN_MMC 182 #define CONFIG_SYS_MMC_ENV_DEV 0 183 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 184 #define CONFIG_ENV_SIZE (8 * 1024) 185 #endif 186 187 #ifdef CONFIG_ENV_IS_IN_NAND 188 #define CONFIG_ENV_SIZE (64 * 2048) 189 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 190 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 191 #endif 192 193 /* USB Host Support */ 194 #define CONFIG_USB_EHCI_VF 195 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 196 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 197 198 /* USB DFU */ 199 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 200 201 /* USB Storage */ 202 #define CONFIG_USB_FUNCTION_MASS_STORAGE 203 204 #endif /* __CONFIG_H */ 205