1 /*
2  * Copyright (C) 2012 Lucas Stach
3  *
4  * Configuration settings for the Toradex Colibri T20 modules.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include "tegra20-common.h"
13 
14 #define CONFIG_ARCH_MISC_INIT
15 
16 /* High-level configuration options */
17 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
18 
19 /* Board-specific serial config */
20 #define CONFIG_TEGRA_ENABLE_UARTA
21 #define CONFIG_TEGRA_UARTA_SDIO1
22 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
23 
24 #define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_T20
25 
26 /* I2C */
27 #define CONFIG_SYS_I2C_TEGRA
28 
29 /* SD/MMC support */
30 #define CONFIG_GENERIC_MMC
31 
32 /* USB host support */
33 #define CONFIG_USB_EHCI
34 #define CONFIG_USB_EHCI_TEGRA
35 #define CONFIG_USB_MAX_CONTROLLER_COUNT	3
36 
37 /* USB networking support */
38 #define CONFIG_USB_HOST_ETHER
39 #define CONFIG_USB_ETHER_ASIX
40 
41 /* General networking support */
42 #define CONFIG_IP_DEFRAG
43 #define CONFIG_TFTP_BLOCKSIZE		1536
44 #define CONFIG_TFTP_TSIZE
45 
46 /* LCD support */
47 #define CONFIG_SYS_WHITE_ON_BLACK
48 #define CONFIG_CMD_BMP
49 #define CONFIG_LCD_LOGO
50 
51 /* NAND support */
52 #define CONFIG_CMD_NAND
53 #define CONFIG_TEGRA_NAND
54 #define CONFIG_SYS_MAX_NAND_DEVICE	1
55 
56 /* Dynamic MTD partition support */
57 #define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
58 #define CONFIG_MTD_PARTITIONS
59 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
60 #define MTDIDS_DEFAULT		"nand0=tegra_nand"
61 #define MTDPARTS_DEFAULT	"mtdparts=tegra_nand:"		\
62 				"2m(u-boot)ro,"			\
63 				"1m(u-boot-env),"		\
64 				"1m(cfgblock)ro,"		\
65 				"-(ubi)"
66 
67 /* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
68 #define CONFIG_ENV_IS_IN_NAND
69 #define CONFIG_ENV_OFFSET		(SZ_2M)
70 #undef CONFIG_ENV_SIZE		/* undef size from tegra20-common.h */
71 #define CONFIG_ENV_SIZE			(SZ_64K)
72 
73 /* UBI */
74 #define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
75 #define CONFIG_LZO
76 #define CONFIG_RBTREE
77 
78 /* Debug commands */
79 
80 /* Miscellaneous commands */
81 #define CONFIG_FAT_WRITE
82 
83 #define BOARD_EXTRA_ENV_SETTINGS \
84 	"mtdparts=" MTDPARTS_DEFAULT "\0"
85 
86 /* Increase console I/O buffer size */
87 #undef CONFIG_SYS_CBSIZE
88 #define CONFIG_SYS_CBSIZE		1024
89 
90 /* Increase arguments buffer size */
91 #undef CONFIG_SYS_BARGSIZE
92 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
93 
94 /* Increase print buffer size */
95 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
96 
97 /* Increase maximum number of arguments */
98 #undef CONFIG_SYS_MAXARGS
99 #define CONFIG_SYS_MAXARGS		32
100 
101 #include "tegra-common-usb-gadget.h"
102 #include "tegra-common-post.h"
103 
104 #endif /* __CONFIG_H */
105