1 /*
2  * Toradex Colibri PXA270 configuration file
3  *
4  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
5  * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef	__CONFIG_H
11 #define	__CONFIG_H
12 
13 /*
14  * High Level Board Configuration Options
15  */
16 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
17 #define	CONFIG_SYS_TEXT_BASE		0x0
18 /* Avoid overwriting factory configuration block */
19 #define CONFIG_BOARD_SIZE_LIMIT		0x40000
20 
21 /* We will never enable dcache because we have to setup MMU first */
22 #define CONFIG_SYS_DCACHE_OFF
23 
24 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
25 
26 /*
27  * Environment settings
28  */
29 #define	CONFIG_ENV_OVERWRITE
30 #define CONFIG_ENV_VARS_UBOOT_CONFIG
31 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
32 #define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
33 #define	CONFIG_ARCH_CPU_INIT
34 #define	CONFIG_BOOTCOMMAND						\
35 	"if fatload mmc 0 0xa0000000 uImage; then "			\
36 		"bootm 0xa0000000; "					\
37 	"fi; "								\
38 	"if usb reset && fatload usb 0 0xa0000000 uImage; then "	\
39 		"bootm 0xa0000000; "					\
40 	"fi; "								\
41 	"bootm 0xc0000;"
42 #define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
43 #define	CONFIG_TIMESTAMP
44 #define	CONFIG_CMDLINE_TAG
45 #define	CONFIG_SETUP_MEMORY_TAGS
46 
47 /*
48  * Serial Console Configuration
49  */
50 
51 /*
52  * Bootloader Components Configuration
53  */
54 #define	CONFIG_CMD_ENV
55 
56 /* I2C support */
57 #ifdef CONFIG_SYS_I2C
58 #define CONFIG_SYS_I2C_PXA
59 #define CONFIG_PXA_STD_I2C
60 #define CONFIG_PXA_PWR_I2C
61 #define CONFIG_SYS_I2C_SPEED		100000
62 #endif
63 
64 /* LCD support */
65 #ifdef CONFIG_LCD
66 #define CONFIG_PXA_LCD
67 #define CONFIG_PXA_VGA
68 #define CONFIG_LCD_LOGO
69 #endif
70 
71 /*
72  * Networking Configuration
73  */
74 #ifdef	CONFIG_CMD_NET
75 
76 #define	CONFIG_DRIVER_DM9000		1
77 #define CONFIG_DM9000_BASE		0x08000000
78 #define DM9000_IO			(CONFIG_DM9000_BASE)
79 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
80 #define	CONFIG_NET_RETRY_COUNT		10
81 
82 #define	CONFIG_BOOTP_BOOTFILESIZE
83 #define	CONFIG_BOOTP_BOOTPATH
84 #define	CONFIG_BOOTP_GATEWAY
85 #define	CONFIG_BOOTP_HOSTNAME
86 #endif
87 
88 #undef	CONFIG_SYS_LONGHELP		/* Saves 10 KB */
89 #define	CONFIG_SYS_CBSIZE		256
90 #define	CONFIG_SYS_PBSIZE		\
91 	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
92 #define	CONFIG_SYS_MAXARGS		16
93 #define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
94 #define	CONFIG_SYS_DEVICE_NULLDEV	1
95 #undef	CONFIG_CMDLINE_EDITING		/* Saves 2.5 KB */
96 #undef	CONFIG_AUTO_COMPLETE		/* Saves 2.5 KB */
97 
98 /*
99  * Clock Configuration
100  */
101 #define	CONFIG_SYS_CPUSPEED		0x290		/* 520MHz */
102 
103 /*
104  * DRAM Map
105  */
106 #define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
107 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
108 #define	PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
109 
110 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
111 #define	CONFIG_SYS_DRAM_SIZE		0x04000000	/* 64 MB DRAM */
112 
113 #define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
114 #define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
115 
116 #define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1
117 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
118 #define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000
119 
120 /*
121  * NOR FLASH
122  */
123 #ifdef	CONFIG_CMD_FLASH
124 #define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
125 #define	PHYS_FLASH_SIZE			0x02000000	/* 32 MB */
126 #define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
127 
128 #define	CONFIG_SYS_FLASH_CFI
129 #define	CONFIG_FLASH_CFI_DRIVER		1
130 #define	CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
131 
132 #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
133 #define	CONFIG_SYS_MAX_FLASH_BANKS	1
134 
135 #define	CONFIG_SYS_FLASH_ERASE_TOUT	(25 * CONFIG_SYS_HZ)
136 #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25 * CONFIG_SYS_HZ)
137 #define	CONFIG_SYS_FLASH_LOCK_TOUT	(25 * CONFIG_SYS_HZ)
138 #define	CONFIG_SYS_FLASH_UNLOCK_TOUT	(25 * CONFIG_SYS_HZ)
139 
140 #define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
141 #define	CONFIG_SYS_FLASH_PROTECTION		1
142 
143 #define CONFIG_ENV_IS_IN_FLASH		1
144 
145 #else	/* No flash */
146 #define	CONFIG_ENV_IS_NOWHERE
147 #endif
148 
149 #define	CONFIG_SYS_MONITOR_BASE		0x0
150 #define	CONFIG_SYS_MONITOR_LEN		0x40000
151 
152 /* Skip factory configuration block */
153 #define	CONFIG_ENV_ADDR			\
154 			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
155 #define	CONFIG_ENV_SIZE			0x40000
156 #define	CONFIG_ENV_SECT_SIZE		0x40000
157 
158 /*
159  * GPIO settings
160  */
161 #define	CONFIG_SYS_GPSR0_VAL	0x00000000
162 #define	CONFIG_SYS_GPSR1_VAL	0x00020000
163 #define	CONFIG_SYS_GPSR2_VAL	0x0002c000
164 #define	CONFIG_SYS_GPSR3_VAL	0x00000000
165 
166 #define	CONFIG_SYS_GPCR0_VAL	0x00000000
167 #define	CONFIG_SYS_GPCR1_VAL	0x00000000
168 #define	CONFIG_SYS_GPCR2_VAL	0x00000000
169 #define	CONFIG_SYS_GPCR3_VAL	0x00000000
170 
171 #define	CONFIG_SYS_GPDR0_VAL	0xc8008000
172 #define	CONFIG_SYS_GPDR1_VAL	0xfc02a981
173 #define	CONFIG_SYS_GPDR2_VAL	0x92c3ffff
174 #define	CONFIG_SYS_GPDR3_VAL	0x0061e804
175 
176 #define	CONFIG_SYS_GAFR0_L_VAL	0x80100000
177 #define	CONFIG_SYS_GAFR0_U_VAL	0xa5c00010
178 #define	CONFIG_SYS_GAFR1_L_VAL	0x6992901a
179 #define	CONFIG_SYS_GAFR1_U_VAL	0xaaa50008
180 #define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
181 #define	CONFIG_SYS_GAFR2_U_VAL	0x4109a002
182 #define	CONFIG_SYS_GAFR3_L_VAL	0x54000310
183 #define	CONFIG_SYS_GAFR3_U_VAL	0x00005401
184 
185 #define	CONFIG_SYS_PSSR_VAL	0x30
186 
187 /*
188  * Clock settings
189  */
190 #define	CONFIG_SYS_CKEN		0x00500240
191 #define	CONFIG_SYS_CCCR		0x02000290
192 
193 /*
194  * Memory settings
195  */
196 #define	CONFIG_SYS_MSC0_VAL	0x9ee1c5f2
197 #define	CONFIG_SYS_MSC1_VAL	0x9ee1f994
198 #define	CONFIG_SYS_MSC2_VAL	0x9ee19ee1
199 #define	CONFIG_SYS_MDCNFG_VAL	0x090009c9
200 #define	CONFIG_SYS_MDREFR_VAL	0x2003a031
201 #define	CONFIG_SYS_MDMRS_VAL	0x00220022
202 #define	CONFIG_SYS_FLYCNFG_VAL	0x00010001
203 #define	CONFIG_SYS_SXCNFG_VAL	0x40044004
204 
205 /*
206  * PCMCIA and CF Interfaces
207  */
208 #define	CONFIG_SYS_MECR_VAL	0x00000000
209 #define	CONFIG_SYS_MCMEM0_VAL	0x00028307
210 #define	CONFIG_SYS_MCMEM1_VAL	0x00014307
211 #define	CONFIG_SYS_MCATT0_VAL	0x00038787
212 #define	CONFIG_SYS_MCATT1_VAL	0x0001c787
213 #define	CONFIG_SYS_MCIO0_VAL	0x0002830f
214 #define	CONFIG_SYS_MCIO1_VAL	0x0001430f
215 
216 #include "pxa-common.h"
217 
218 #endif /* __CONFIG_H */
219