1 /*
2  * Toradex Colibri PXA270 configuration file
3  *
4  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
5  * Copyright (C) 2015 Marcel Ziswiler <marcel@ziswiler.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef	__CONFIG_H
11 #define	__CONFIG_H
12 
13 /*
14  * High Level Board Configuration Options
15  */
16 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
17 #define CONFIG_SYS_GENERIC_BOARD
18 #define	CONFIG_SYS_TEXT_BASE		0x0
19 /* Avoid overwriting factory configuration block */
20 #define CONFIG_BOARD_SIZE_LIMIT		0x40000
21 
22 /*
23  * Environment settings
24  */
25 #define	CONFIG_ENV_OVERWRITE
26 #define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
27 #define	CONFIG_ARCH_CPU_INIT
28 #define	CONFIG_BOOTCOMMAND						\
29 	"if fatload mmc 0 0xa0000000 uImage; then "			\
30 		"bootm 0xa0000000; "					\
31 	"fi; "								\
32 	"if usb reset && fatload usb 0 0xa0000000 uImage; then "	\
33 		"bootm 0xa0000000; "					\
34 	"fi; "								\
35 	"bootm 0xc0000;"
36 #define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
37 #define	CONFIG_TIMESTAMP
38 #define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
39 #define	CONFIG_CMDLINE_TAG
40 #define	CONFIG_SETUP_MEMORY_TAGS
41 #define	CONFIG_LZMA			/* LZMA compression support */
42 #define	CONFIG_OF_LIBFDT
43 
44 /*
45  * Serial Console Configuration
46  */
47 #define	CONFIG_PXA_SERIAL
48 #define	CONFIG_FFUART			1
49 #define CONFIG_CONS_INDEX		3
50 #define	CONFIG_BAUDRATE			115200
51 
52 /*
53  * Bootloader Components Configuration
54  */
55 #include <config_cmd_default.h>
56 
57 #undef CONFIG_CMD_LOADB			/* Both together */
58 #undef CONFIG_CMD_LOADS			/* saves 10 KB */
59 #define	CONFIG_CMD_NET
60 #define	CONFIG_CMD_ENV
61 #undef	CONFIG_CMD_IMLS
62 #define	CONFIG_CMD_MMC
63 #define	CONFIG_CMD_USB
64 #define	CONFIG_CMD_FLASH
65 
66 /*
67  * Networking Configuration
68  */
69 #ifdef	CONFIG_CMD_NET
70 #define	CONFIG_CMD_PING
71 #define	CONFIG_CMD_DHCP
72 
73 #define	CONFIG_DRIVER_DM9000		1
74 #define CONFIG_DM9000_BASE		0x08000000
75 #define DM9000_IO			(CONFIG_DM9000_BASE)
76 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
77 #define	CONFIG_NET_RETRY_COUNT		10
78 
79 #define	CONFIG_BOOTP_BOOTFILESIZE
80 #define	CONFIG_BOOTP_BOOTPATH
81 #define	CONFIG_BOOTP_GATEWAY
82 #define	CONFIG_BOOTP_HOSTNAME
83 #endif
84 
85 /*
86  * HUSH Shell Configuration
87  */
88 #define	CONFIG_SYS_HUSH_PARSER		1
89 
90 #undef	CONFIG_SYS_LONGHELP		/* Saves 10 KB */
91 #ifdef	CONFIG_SYS_HUSH_PARSER
92 #define	CONFIG_SYS_PROMPT		"$ "
93 #else
94 #endif
95 #define	CONFIG_SYS_CBSIZE		256
96 #define	CONFIG_SYS_PBSIZE		\
97 	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
98 #define	CONFIG_SYS_MAXARGS		16
99 #define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
100 #define	CONFIG_SYS_DEVICE_NULLDEV	1
101 #define	CONFIG_CMDLINE_EDITING		1
102 #define	CONFIG_AUTO_COMPLETE		1
103 
104 /*
105  * Clock Configuration
106  */
107 #define	CONFIG_SYS_CPUSPEED		0x290		/* 520MHz */
108 
109 /*
110  * DRAM Map
111  */
112 #define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
113 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
114 #define	PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
115 
116 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
117 #define	CONFIG_SYS_DRAM_SIZE		0x04000000	/* 64 MB DRAM */
118 
119 #define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
120 #define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
121 
122 #define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1
123 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
124 #define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000
125 
126 /*
127  * NOR FLASH
128  */
129 #ifdef	CONFIG_CMD_FLASH
130 #define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
131 #define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
132 
133 #define	CONFIG_SYS_FLASH_CFI
134 #define	CONFIG_FLASH_CFI_DRIVER		1
135 
136 #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
137 #define	CONFIG_SYS_MAX_FLASH_BANKS	1
138 
139 #define	CONFIG_SYS_FLASH_ERASE_TOUT	(25 * CONFIG_SYS_HZ)
140 #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25 * CONFIG_SYS_HZ)
141 
142 #define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
143 #define	CONFIG_SYS_FLASH_PROTECTION		1
144 
145 #define CONFIG_ENV_IS_IN_FLASH		1
146 
147 #else	/* No flash */
148 #define	CONFIG_SYS_NO_FLASH
149 #define	CONFIG_ENV_IS_NOWHERE
150 #endif
151 
152 #define	CONFIG_SYS_MONITOR_BASE		0x0
153 #define	CONFIG_SYS_MONITOR_LEN		0x40000
154 
155 /* Skip factory configuration block */
156 #define	CONFIG_ENV_ADDR			\
157 			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
158 #define	CONFIG_ENV_SIZE			0x40000
159 #define	CONFIG_ENV_SECT_SIZE		0x40000
160 
161 /*
162  * GPIO settings
163  */
164 #define	CONFIG_SYS_GPSR0_VAL	0x00000000
165 #define	CONFIG_SYS_GPSR1_VAL	0x00020000
166 #define	CONFIG_SYS_GPSR2_VAL	0x0002c000
167 #define	CONFIG_SYS_GPSR3_VAL	0x00000000
168 
169 #define	CONFIG_SYS_GPCR0_VAL	0x00000000
170 #define	CONFIG_SYS_GPCR1_VAL	0x00000000
171 #define	CONFIG_SYS_GPCR2_VAL	0x00000000
172 #define	CONFIG_SYS_GPCR3_VAL	0x00000000
173 
174 #define	CONFIG_SYS_GPDR0_VAL	0xc8008000
175 #define	CONFIG_SYS_GPDR1_VAL	0xfc02a981
176 #define	CONFIG_SYS_GPDR2_VAL	0x92c3ffff
177 #define	CONFIG_SYS_GPDR3_VAL	0x0061e804
178 
179 #define	CONFIG_SYS_GAFR0_L_VAL	0x80100000
180 #define	CONFIG_SYS_GAFR0_U_VAL	0xa5c00010
181 #define	CONFIG_SYS_GAFR1_L_VAL	0x6992901a
182 #define	CONFIG_SYS_GAFR1_U_VAL	0xaaa50008
183 #define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
184 #define	CONFIG_SYS_GAFR2_U_VAL	0x4109a002
185 #define	CONFIG_SYS_GAFR3_L_VAL	0x54000310
186 #define	CONFIG_SYS_GAFR3_U_VAL	0x00005401
187 
188 #define	CONFIG_SYS_PSSR_VAL	0x30
189 
190 /*
191  * Clock settings
192  */
193 #define	CONFIG_SYS_CKEN		0x00500240
194 #define	CONFIG_SYS_CCCR		0x02000290
195 
196 /*
197  * Memory settings
198  */
199 #define	CONFIG_SYS_MSC0_VAL	0x9ee1c5f2
200 #define	CONFIG_SYS_MSC1_VAL	0x9ee1f994
201 #define	CONFIG_SYS_MSC2_VAL	0x9ee19ee1
202 #define	CONFIG_SYS_MDCNFG_VAL	0x090009c9
203 #define	CONFIG_SYS_MDREFR_VAL	0x2003a031
204 #define	CONFIG_SYS_MDMRS_VAL	0x00220022
205 #define	CONFIG_SYS_FLYCNFG_VAL	0x00010001
206 #define	CONFIG_SYS_SXCNFG_VAL	0x40044004
207 
208 /*
209  * PCMCIA and CF Interfaces
210  */
211 #define	CONFIG_SYS_MECR_VAL	0x00000000
212 #define	CONFIG_SYS_MCMEM0_VAL	0x00028307
213 #define	CONFIG_SYS_MCMEM1_VAL	0x00014307
214 #define	CONFIG_SYS_MCATT0_VAL	0x00038787
215 #define	CONFIG_SYS_MCATT1_VAL	0x0001c787
216 #define	CONFIG_SYS_MCIO0_VAL	0x0002830f
217 #define	CONFIG_SYS_MCIO1_VAL	0x0001430f
218 
219 #include "pxa-common.h"
220 
221 #endif /* __CONFIG_H */
222