1 /* 2 * Toradex Colibri PXA270 configuration file 3 * 4 * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation; either version 2 of 9 * the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 19 * MA 02111-1307 USA 20 */ 21 22 #ifndef __CONFIG_H 23 #define __CONFIG_H 24 25 /* 26 * High Level Board Configuration Options 27 */ 28 #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ 29 #define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ 30 31 #undef BOARD_LATE_INIT 32 #undef CONFIG_SKIP_RELOCATE_UBOOT 33 #undef CONFIG_USE_IRQ 34 #undef CONFIG_SKIP_LOWLEVEL_INIT 35 36 /* 37 * Environment settings 38 */ 39 #define CONFIG_ENV_SIZE 0x4000 40 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) 41 #define CONFIG_SYS_TEXT_BASE 0x0 42 #define CONFIG_ENV_OVERWRITE /* override default environment */ 43 44 #define CONFIG_BOOTCOMMAND \ 45 "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \ 46 "bootm 0xa0000000; " \ 47 "fi; " \ 48 "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ 49 "bootm 0xa0000000; " \ 50 "fi; " \ 51 "bootm 0x80000;" 52 #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" 53 #define CONFIG_TIMESTAMP 54 #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ 55 #define CONFIG_CMDLINE_TAG 56 #define CONFIG_SETUP_MEMORY_TAGS 57 58 #define CONFIG_LZMA /* LZMA compression support */ 59 60 /* 61 * Serial Console Configuration 62 */ 63 #define CONFIG_PXA_SERIAL 64 #define CONFIG_FFUART 1 65 #define CONFIG_BAUDRATE 115200 66 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 67 68 /* 69 * Bootloader Components Configuration 70 */ 71 #include <config_cmd_default.h> 72 73 #define CONFIG_CMD_NET 74 #define CONFIG_CMD_ENV 75 #undef CONFIG_CMD_IMLS 76 #define CONFIG_CMD_MMC 77 #define CONFIG_CMD_USB 78 #define CONFIG_CMD_FLASH 79 80 /* 81 * Networking Configuration 82 * chip on the Voipac PXA270 board 83 */ 84 #ifdef CONFIG_CMD_NET 85 #define CONFIG_CMD_PING 86 #define CONFIG_CMD_DHCP 87 88 #define CONFIG_NET_MULTI 1 89 #define CONFIG_DRIVER_DM9000 1 90 #define CONFIG_DM9000_BASE 0x08000000 91 #define DM9000_IO (CONFIG_DM9000_BASE) 92 #define DM9000_DATA (CONFIG_DM9000_BASE + 4) 93 #define CONFIG_NET_RETRY_COUNT 10 94 95 #define CONFIG_BOOTP_BOOTFILESIZE 96 #define CONFIG_BOOTP_BOOTPATH 97 #define CONFIG_BOOTP_GATEWAY 98 #define CONFIG_BOOTP_HOSTNAME 99 #endif 100 101 /* 102 * MMC Card Configuration 103 */ 104 #ifdef CONFIG_CMD_MMC 105 #define CONFIG_MMC 106 #define CONFIG_PXA_MMC 107 #define CONFIG_SYS_MMC_BASE 0xF0000000 108 #define CONFIG_CMD_FAT 109 #define CONFIG_DOS_PARTITION 110 #endif 111 112 /* 113 * KGDB 114 */ 115 #ifdef CONFIG_CMD_KGDB 116 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 117 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 118 #endif 119 120 /* 121 * HUSH Shell Configuration 122 */ 123 #define CONFIG_SYS_HUSH_PARSER 1 124 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 125 126 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 127 #ifdef CONFIG_SYS_HUSH_PARSER 128 #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ 129 #else 130 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 131 #endif 132 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 133 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 134 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 135 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 136 #define CONFIG_SYS_DEVICE_NULLDEV 1 137 138 /* 139 * Clock Configuration 140 */ 141 #undef CONFIG_SYS_CLKS_IN_HZ 142 #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ 143 #define CONFIG_SYS_CPUSPEED 0x290 /* 520 MHz */ 144 145 /* 146 * Stack sizes 147 * 148 * The stack sizes are set up in start.S using the settings below 149 */ 150 #define CONFIG_STACKSIZE (128*1024) /* regular stack */ 151 #ifdef CONFIG_USE_IRQ 152 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ 153 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ 154 #endif 155 156 /* 157 * DRAM Map 158 */ 159 #define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ 160 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ 161 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 162 163 #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ 164 #define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ 165 166 #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ 167 #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ 168 169 #define CONFIG_SYS_LOAD_ADDR (0xa1000000) 170 171 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 172 #define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) 173 174 /* 175 * NOR FLASH 176 */ 177 #ifdef CONFIG_CMD_FLASH 178 #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ 179 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 180 181 #define CONFIG_SYS_FLASH_CFI 182 #define CONFIG_FLASH_CFI_DRIVER 1 183 184 #define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) 185 #define CONFIG_SYS_MAX_FLASH_BANKS 1 186 187 #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) 188 #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) 189 190 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 191 #define CONFIG_SYS_FLASH_PROTECTION 1 192 193 #define CONFIG_ENV_IS_IN_FLASH 1 194 195 #else /* No flash */ 196 #define CONFIG_SYS_NO_FLASH 197 #define CONFIG_SYS_ENV_IS_NOWHERE 198 #endif 199 200 #define CONFIG_SYS_MONITOR_BASE 0x000000 201 #define CONFIG_SYS_MONITOR_LEN 0x40000 202 203 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN) 204 #define CONFIG_ENV_SECT_SIZE 0x40000 205 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) 206 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 207 208 209 /* 210 * GPIO settings 211 */ 212 #define CONFIG_SYS_GPSR0_VAL 0x00000000 213 #define CONFIG_SYS_GPSR1_VAL 0x00020000 214 #define CONFIG_SYS_GPSR2_VAL 0x0002C000 215 #define CONFIG_SYS_GPSR3_VAL 0x00000000 216 217 #define CONFIG_SYS_GPCR0_VAL 0x00000000 218 #define CONFIG_SYS_GPCR1_VAL 0x00000000 219 #define CONFIG_SYS_GPCR2_VAL 0x00000000 220 #define CONFIG_SYS_GPCR3_VAL 0x00000000 221 222 #define CONFIG_SYS_GPDR0_VAL 0x08000000 223 #define CONFIG_SYS_GPDR1_VAL 0x0002A981 224 #define CONFIG_SYS_GPDR2_VAL 0x0202FC00 225 #define CONFIG_SYS_GPDR3_VAL 0x00000000 226 227 #define CONFIG_SYS_GAFR0_L_VAL 0x00100000 228 #define CONFIG_SYS_GAFR0_U_VAL 0x00C00010 229 #define CONFIG_SYS_GAFR1_L_VAL 0x999A901A 230 #define CONFIG_SYS_GAFR1_U_VAL 0xAAA00008 231 #define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA 232 #define CONFIG_SYS_GAFR2_U_VAL 0x0109A000 233 #define CONFIG_SYS_GAFR3_L_VAL 0x54000300 234 #define CONFIG_SYS_GAFR3_U_VAL 0x00024001 235 236 #define CONFIG_SYS_PSSR_VAL 0x30 237 238 /* 239 * Clock settings 240 */ 241 #define CONFIG_SYS_CKEN 0x00500240 242 #define CONFIG_SYS_CCCR 0x02000290 243 244 /* 245 * Memory settings 246 */ 247 #define CONFIG_SYS_MSC0_VAL 0x000095f2 248 #define CONFIG_SYS_MSC1_VAL 0x00007ff4 249 #define CONFIG_SYS_MSC2_VAL 0x00000000 250 #define CONFIG_SYS_MDCNFG_VAL 0x08000ac9 251 #define CONFIG_SYS_MDREFR_VAL 0x2013e01e 252 #define CONFIG_SYS_MDMRS_VAL 0x00320032 253 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 254 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 255 256 /* 257 * PCMCIA and CF Interfaces 258 */ 259 #define CONFIG_SYS_MECR_VAL 0x00000001 260 #define CONFIG_SYS_MCMEM0_VAL 0x00014307 261 #define CONFIG_SYS_MCMEM1_VAL 0x00014307 262 #define CONFIG_SYS_MCATT0_VAL 0x0001c787 263 #define CONFIG_SYS_MCATT1_VAL 0x0001c787 264 #define CONFIG_SYS_MCIO0_VAL 0x0001430f 265 #define CONFIG_SYS_MCIO1_VAL 0x0001430f 266 267 /* 268 * USB 269 */ 270 #ifdef CONFIG_CMD_USB 271 #define CONFIG_USB_OHCI_NEW 272 #define CONFIG_SYS_USB_OHCI_CPU_INIT 273 #define CONFIG_SYS_USB_OHCI_BOARD_INIT 274 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 275 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 276 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "tdex270" 277 #define CONFIG_USB_STORAGE 278 #endif 279 280 #endif /* __CONFIG_H */ 281