1 /*
2  * Copyright 2016 Toradex AG
3  *
4  * Configuration settings for the Colibri iMX7 module.
5  *
6  * based on mx7dsabresd.h:
7  * Copyright (C) 2015 Freescale Semiconductor, Inc.
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef __COLIBRI_IMX7_CONFIG_H
13 #define __COLIBRI_IMX7_CONFIG_H
14 
15 #include "mx7_common.h"
16 
17 /*#define CONFIG_DBG_MONITOR*/
18 #define PHYS_SDRAM_SIZE			SZ_512M
19 
20 #define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
21 
22 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
23 
24 /* Size of malloc() pool */
25 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
26 
27 /* Network */
28 #define CONFIG_FEC_MXC
29 #define CONFIG_MII
30 #define CONFIG_FEC_XCV_TYPE             RMII
31 #define CONFIG_ETHPRIME                 "FEC"
32 #define CONFIG_FEC_MXC_PHYADDR          0
33 
34 #define CONFIG_IP_DEFRAG
35 #define CONFIG_TFTP_BLOCKSIZE		16352
36 #define CONFIG_TFTP_TSIZE
37 
38 /* ENET1 */
39 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
40 
41 /* MMC Config*/
42 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
43 #define CONFIG_SYS_FSL_USDHC_NUM	1
44 
45 #undef CONFIG_BOOTM_PLAN9
46 #undef CONFIG_BOOTM_RTEMS
47 
48 /* I2C configs */
49 #define CONFIG_SYS_I2C_MXC
50 #define CONFIG_SYS_I2C_SPEED		100000
51 
52 #define CONFIG_IPADDR			192.168.10.2
53 #define CONFIG_NETMASK			255.255.255.0
54 #define CONFIG_SERVERIP			192.168.10.1
55 
56 #define MEM_LAYOUT_ENV_SETTINGS \
57 	"bootm_size=0x10000000\0" \
58 	"fdt_addr_r=0x82000000\0" \
59 	"fdt_high=0xffffffff\0" \
60 	"initrd_high=0xffffffff\0" \
61 	"kernel_addr_r=0x81000000\0" \
62 	"ramdisk_addr_r=0x82100000\0"
63 
64 #define SD_BOOTCMD \
65 	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
66 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
67 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
68 	"run m4boot && " \
69 	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
70 	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
71 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
72 
73 #define NFS_BOOTCMD \
74 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
75 	"nfsboot=run setup; " \
76 		"setenv bootargs ${defargs} ${nfsargs} " \
77 		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
78 		"dhcp ${kernel_addr_r} && "	\
79 		"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
80 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
81 
82 #define UBI_BOOTCMD	\
83 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
84 		"ubi.fm_autoconvert=1\0" \
85 	"ubiboot=run setup; " \
86 		"setenv bootargs ${defargs} ${ubiargs} " \
87 		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
88 		"ubi part ubi && run m4boot && " \
89 		"ubi read ${kernel_addr_r} kernel && " \
90 		"ubi read ${fdt_addr_r} dtb && " \
91 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
92 
93 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
94 
95 #define CONFIG_EXTRA_ENV_SETTINGS \
96 	MEM_LAYOUT_ENV_SETTINGS \
97 	NFS_BOOTCMD \
98 	SD_BOOTCMD \
99 	UBI_BOOTCMD \
100 	"console=ttymxc0\0" \
101 	"defargs=\0" \
102 	"fdt_board=eval-v3\0" \
103 	"fdt_fixup=;\0" \
104 	"m4boot=;\0" \
105 	"ip_dyn=yes\0" \
106 	"kernel_file=zImage\0" \
107 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
108 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
109 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
110 		"${board}/flash_eth.img && source ${loadaddr}\0" \
111 	"setsdupdate=mmc rescan && setenv interface mmc && " \
112 		"fatload ${interface} 0:1 ${loadaddr} " \
113 		"${board}/flash_blk.img && source ${loadaddr}\0" \
114 	"setup=setenv setupargs " \
115 		"console=tty1 console=${console}" \
116 		",${baudrate}n8 ${memargs} consoleblank=0\0" \
117 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
118 	"setusbupdate=usb start && setenv interface usb && " \
119 		"fatload ${interface} 0:1 ${loadaddr} " \
120 		"${board}/flash_blk.img && source ${loadaddr}\0" \
121 	"splashpos=m,m\0" \
122 	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
123 	"updlevel=2\0"
124 
125 /* Miscellaneous configurable options */
126 
127 #define CONFIG_SYS_MEMTEST_START	0x80000000
128 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x0c000000)
129 
130 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
131 #define CONFIG_SYS_HZ			1000
132 
133 /* Physical Memory Map */
134 #define CONFIG_NR_DRAM_BANKS		1
135 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
136 
137 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
138 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
139 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
140 
141 #define CONFIG_SYS_INIT_SP_OFFSET \
142 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
143 #define CONFIG_SYS_INIT_SP_ADDR \
144 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
145 
146 /* environment organization */
147 
148 #if defined(CONFIG_ENV_IS_IN_MMC)
149 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
150 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
151 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
152 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
153 #elif defined(CONFIG_ENV_IS_IN_NAND)
154 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
155 #define CONFIG_ENV_OFFSET		(28 * CONFIG_ENV_SECT_SIZE)
156 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
157 #endif
158 
159 /* NAND stuff */
160 #define CONFIG_SYS_MAX_NAND_DEVICE	1
161 #define CONFIG_SYS_NAND_BASE		0x40000000
162 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
163 #define CONFIG_SYS_NAND_ONFI_DETECTION
164 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
165 
166 /* Dynamic MTD partition support */
167 #define CONFIG_MTD_PARTITIONS
168 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
169 
170 /* DMA stuff, needed for GPMI/MXS NAND support */
171 
172 /* USB Configs */
173 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
174 
175 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
176 #define CONFIG_MXC_USB_FLAGS		0
177 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
178 
179 #define CONFIG_IMX_THERMAL
180 
181 #define CONFIG_USBD_HS
182 
183 /* USB Device Firmware Update support */
184 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
185 #define DFU_DEFAULT_POLL_TIMEOUT	300
186 
187 #ifdef CONFIG_VIDEO
188 #define CONFIG_VIDEO_MXS
189 #define CONFIG_VIDEO_LOGO
190 #define CONFIG_SPLASH_SCREEN
191 #define CONFIG_SPLASH_SCREEN_ALIGN
192 #define CONFIG_BMP_16BPP
193 #define CONFIG_VIDEO_BMP_RLE8
194 #define CONFIG_VIDEO_BMP_LOGO
195 #endif
196 
197 #endif
198