1 /* 2 * Copyright 2016 Toradex AG 3 * 4 * Configuration settings for the Colibri iMX7 module. 5 * 6 * based on mx7dsabresd.h: 7 * Copyright (C) 2015 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __COLIBRI_IMX7_CONFIG_H 13 #define __COLIBRI_IMX7_CONFIG_H 14 15 #include "mx7_common.h" 16 17 /*#define CONFIG_DBG_MONITOR*/ 18 #define PHYS_SDRAM_SIZE SZ_512M 19 20 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ 21 22 #define CONFIG_ENV_VARS_UBOOT_CONFIG 23 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 24 25 /* Size of malloc() pool */ 26 #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) 27 28 /* Network */ 29 #define CONFIG_FEC_MXC 30 #define CONFIG_MII 31 #define CONFIG_FEC_XCV_TYPE RMII 32 #define CONFIG_ETHPRIME "FEC" 33 #define CONFIG_FEC_MXC_PHYADDR 0 34 35 #define CONFIG_IP_DEFRAG 36 #define CONFIG_TFTP_BLOCKSIZE 16352 37 #define CONFIG_TFTP_TSIZE 38 39 /* ENET1 */ 40 #define IMX_FEC_BASE ENET_IPS_BASE_ADDR 41 42 /* MMC Config*/ 43 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 44 #define CONFIG_SYS_FSL_USDHC_NUM 1 45 46 #undef CONFIG_BOOTM_PLAN9 47 #undef CONFIG_BOOTM_RTEMS 48 49 /* I2C configs */ 50 #define CONFIG_SYS_I2C_MXC 51 #define CONFIG_SYS_I2C_SPEED 100000 52 53 #define CONFIG_IPADDR 192.168.10.2 54 #define CONFIG_NETMASK 255.255.255.0 55 #define CONFIG_SERVERIP 192.168.10.1 56 57 #define MEM_LAYOUT_ENV_SETTINGS \ 58 "bootm_size=0x10000000\0" \ 59 "fdt_addr_r=0x82000000\0" \ 60 "fdt_high=0xffffffff\0" \ 61 "initrd_high=0xffffffff\0" \ 62 "kernel_addr_r=0x81000000\0" \ 63 "ramdisk_addr_r=0x82100000\0" 64 65 #define SD_BOOTCMD \ 66 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 67 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ 68 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 69 "run m4boot && " \ 70 "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ 71 "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 72 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 73 74 #define NFS_BOOTCMD \ 75 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 76 "nfsboot=run setup; " \ 77 "setenv bootargs ${defargs} ${nfsargs} " \ 78 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 79 "dhcp ${kernel_addr_r} && " \ 80 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 81 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 82 83 #define UBI_BOOTCMD \ 84 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 85 "ubi.fm_autoconvert=1\0" \ 86 "ubiboot=run setup; " \ 87 "setenv bootargs ${defargs} ${ubiargs} " \ 88 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 89 "ubi part ubi && run m4boot && " \ 90 "ubi read ${kernel_addr_r} kernel && " \ 91 "ubi read ${fdt_addr_r} dtb && " \ 92 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 93 94 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 95 96 #define CONFIG_EXTRA_ENV_SETTINGS \ 97 MEM_LAYOUT_ENV_SETTINGS \ 98 NFS_BOOTCMD \ 99 SD_BOOTCMD \ 100 UBI_BOOTCMD \ 101 "console=ttymxc0\0" \ 102 "defargs=\0" \ 103 "fdt_board=eval-v3\0" \ 104 "fdt_fixup=;\0" \ 105 "m4boot=;\0" \ 106 "ip_dyn=yes\0" \ 107 "kernel_file=zImage\0" \ 108 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 109 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ 110 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ 111 "${board}/flash_eth.img && source ${loadaddr}\0" \ 112 "setsdupdate=mmc rescan && setenv interface mmc && " \ 113 "fatload ${interface} 0:1 ${loadaddr} " \ 114 "${board}/flash_blk.img && source ${loadaddr}\0" \ 115 "setup=setenv setupargs " \ 116 "console=tty1 console=${console}" \ 117 ",${baudrate}n8 ${memargs} consoleblank=0\0" \ 118 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ 119 "setusbupdate=usb start && setenv interface usb && " \ 120 "fatload ${interface} 0:1 ${loadaddr} " \ 121 "${board}/flash_blk.img && source ${loadaddr}\0" \ 122 "splashpos=m,m\0" \ 123 "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ 124 "updlevel=2\0" 125 126 /* Miscellaneous configurable options */ 127 #define CONFIG_SYS_LONGHELP 128 129 #define CONFIG_SYS_MEMTEST_START 0x80000000 130 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000) 131 132 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 133 #define CONFIG_SYS_HZ 1000 134 135 /* Physical Memory Map */ 136 #define CONFIG_NR_DRAM_BANKS 1 137 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 138 139 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 140 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 141 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 142 143 #define CONFIG_SYS_INIT_SP_OFFSET \ 144 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 145 #define CONFIG_SYS_INIT_SP_ADDR \ 146 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 147 148 /* environment organization */ 149 150 #if defined(CONFIG_ENV_IS_IN_MMC) 151 #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ 152 #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ 153 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ 154 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 155 #elif defined(CONFIG_ENV_IS_IN_NAND) 156 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 157 #define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE) 158 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 159 #endif 160 161 #define CONFIG_NAND_MXS 162 163 /* NAND stuff */ 164 #define CONFIG_SYS_MAX_NAND_DEVICE 1 165 #define CONFIG_SYS_NAND_BASE 0x40000000 166 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 167 #define CONFIG_SYS_NAND_ONFI_DETECTION 168 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES 169 170 /* Dynamic MTD partition support */ 171 #define CONFIG_MTD_PARTITIONS 172 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 173 174 /* DMA stuff, needed for GPMI/MXS NAND support */ 175 #define CONFIG_APBH_DMA 176 #define CONFIG_APBH_DMA_BURST 177 #define CONFIG_APBH_DMA_BURST8 178 179 /* USB Configs */ 180 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 181 182 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 183 #define CONFIG_MXC_USB_FLAGS 0 184 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 185 186 #define CONFIG_IMX_THERMAL 187 188 #define CONFIG_USBD_HS 189 190 #define CONFIG_USB_FUNCTION_MASS_STORAGE 191 192 /* USB Device Firmware Update support */ 193 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M 194 #define DFU_DEFAULT_POLL_TIMEOUT 300 195 196 #ifdef CONFIG_VIDEO 197 #define CONFIG_VIDEO_MXS 198 #define CONFIG_VIDEO_LOGO 199 #define CONFIG_SPLASH_SCREEN 200 #define CONFIG_SPLASH_SCREEN_ALIGN 201 #define CONFIG_BMP_16BPP 202 #define CONFIG_VIDEO_BMP_RLE8 203 #define CONFIG_VIDEO_BMP_LOGO 204 #endif 205 206 #endif 207