1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2016-2018 Toradex AG
4  *
5  * Configuration settings for the Colibri iMX7 module.
6  *
7  * based on mx7dsabresd.h:
8  * Copyright (C) 2015 Freescale Semiconductor, Inc.
9  */
10 
11 #ifndef __COLIBRI_IMX7_CONFIG_H
12 #define __COLIBRI_IMX7_CONFIG_H
13 
14 #include "mx7_common.h"
15 
16 /*#define CONFIG_DBG_MONITOR*/
17 #define PHYS_SDRAM_SIZE			SZ_1G
18 
19 /* Size of malloc() pool */
20 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
21 
22 /* Network */
23 #define CONFIG_FEC_MXC
24 #define CONFIG_FEC_XCV_TYPE             RMII
25 #define CONFIG_ETHPRIME                 "FEC"
26 #define CONFIG_FEC_MXC_PHYADDR          0
27 
28 #define CONFIG_IP_DEFRAG
29 #define CONFIG_TFTP_BLOCKSIZE		16352
30 #define CONFIG_TFTP_TSIZE
31 
32 /* ENET1 */
33 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
34 
35 /* MMC Config*/
36 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
37 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
38 #define CONFIG_SYS_FSL_USDHC_NUM	1
39 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
40 #define CONFIG_SYS_FSL_USDHC_NUM	2
41 
42 #define CONFIG_SUPPORT_EMMC_BOOT
43 #endif
44 
45 #undef CONFIG_BOOTM_PLAN9
46 #undef CONFIG_BOOTM_RTEMS
47 
48 /* I2C configs */
49 #define CONFIG_SYS_I2C_MXC
50 #define CONFIG_SYS_I2C_SPEED		100000
51 
52 #define CONFIG_IPADDR			192.168.10.2
53 #define CONFIG_NETMASK			255.255.255.0
54 #define CONFIG_SERVERIP			192.168.10.1
55 
56 #define EMMC_BOOTCMD \
57 	"emmcargs=ip=off root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait\0" \
58 	"emmcboot=run setup; " \
59 		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
60 		"${vidargs}; echo Booting from internal eMMC chip...; " \
61 		"run m4boot && " \
62 		"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-emmc-${fdt_board}.dtb && " \
63 		"load mmc 0:1 ${kernel_addr_r} ${boot_file} && " \
64 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
65 
66 #define MEM_LAYOUT_ENV_SETTINGS \
67 	"bootm_size=0x10000000\0" \
68 	"fdt_addr_r=0x82000000\0" \
69 	"fdt_high=0xffffffff\0" \
70 	"initrd_high=0xffffffff\0" \
71 	"kernel_addr_r=0x81000000\0" \
72 	"ramdisk_addr_r=0x82100000\0"
73 
74 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
75 #define SD_BOOTCMD \
76 	"sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
77 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
78 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
79 	"run m4boot && " \
80 	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
81 	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
82 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
83 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
84 #define SD_BOOTCMD \
85 	"sdargs=root=/dev/mmcblk1p2 ro rootwait\0" \
86 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
87 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
88 	"run m4boot && " \
89 	"load mmc 1:1 ${kernel_addr_r} ${kernel_file} && " \
90 	"load mmc 1:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
91 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
92 #endif
93 
94 
95 #define NFS_BOOTCMD \
96 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
97 	"nfsboot=run setup; " \
98 		"setenv bootargs ${defargs} ${nfsargs} " \
99 		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
100 		"dhcp ${kernel_addr_r} && " \
101 		"tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \
102 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
103 
104 #define UBI_BOOTCMD	\
105 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
106 		"ubi.fm_autoconvert=1\0" \
107 	"ubiboot=run setup; " \
108 		"setenv bootargs ${defargs} ${ubiargs} " \
109 		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
110 		"ubi part ubi && run m4boot && " \
111 		"ubi read ${kernel_addr_r} kernel && " \
112 		"ubi read ${fdt_addr_r} dtb && " \
113 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
114 
115 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
116 #define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
117 	"setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
118 #define MODULE_EXTRA_ENV_SETTINGS \
119 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
120 	UBI_BOOTCMD
121 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
122 #define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \
123 	"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
124 #define MODULE_EXTRA_ENV_SETTINGS \
125 	"variant=-emmc\0" \
126 	EMMC_BOOTCMD
127 #endif
128 
129 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
130 #define BOOT_TARGET_DEVICES(func) \
131 	func(MMC, mmc, 0) \
132 	func(USB, usb, 0) \
133 	func(DHCP, dhcp, na)
134 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
135 #define BOOT_TARGET_DEVICES(func) \
136 	func(MMC, mmc, 0) \
137 	func(MMC, mmc, 1) \
138 	func(USB, usb, 0) \
139 	func(DHCP, dhcp, na)
140 #endif
141 #include <config_distro_bootcmd.h>
142 
143 #define CONFIG_EXTRA_ENV_SETTINGS \
144 	BOOTENV \
145 	MEM_LAYOUT_ENV_SETTINGS \
146 	NFS_BOOTCMD \
147 	SD_BOOTCMD \
148 	MODULE_EXTRA_ENV_SETTINGS \
149 	"console=ttymxc0\0" \
150 	"defargs=\0" \
151 	"fdt_board=eval-v3\0" \
152 	"fdt_fixup=;\0" \
153 	"m4boot=;\0" \
154 	"ip_dyn=yes\0" \
155 	"kernel_file=zImage\0" \
156 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
157 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
158 		"${board}/flash_eth.img && source ${loadaddr}\0" \
159 	"setsdupdate=mmc rescan && setenv interface mmc && " \
160 		"fatload ${interface} 0:1 ${loadaddr} " \
161 		"${board}/flash_blk.img && source ${loadaddr}\0" \
162 	"setup=setenv setupargs " \
163 		"console=tty1 console=${console}" \
164 		",${baudrate}n8 ${memargs} consoleblank=0\0" \
165 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
166 	"setusbupdate=usb start && setenv interface usb && " \
167 		"fatload ${interface} 0:1 ${loadaddr} " \
168 		"${board}/flash_blk.img && source ${loadaddr}\0" \
169 	"splashpos=m,m\0" \
170 	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
171 	"updlevel=2\0"
172 
173 /* Miscellaneous configurable options */
174 
175 #define CONFIG_SYS_MEMTEST_START	0x80000000
176 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x0c000000)
177 
178 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
179 #define CONFIG_SYS_HZ			1000
180 
181 /* Physical Memory Map */
182 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
183 
184 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
185 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
186 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
187 
188 #define CONFIG_SYS_INIT_SP_OFFSET \
189 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
190 #define CONFIG_SYS_INIT_SP_ADDR \
191 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
192 
193 /* environment organization */
194 
195 #if defined(CONFIG_ENV_IS_IN_MMC)
196 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
197 #define CONFIG_ENV_SIZE			(8 * 1024)
198 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
199 					 CONFIG_TDX_CFG_BLOCK_OFFSET)
200 #define CONFIG_SYS_MMC_ENV_DEV		0
201 #define CONFIG_SYS_MMC_ENV_PART		1
202 #elif defined(CONFIG_ENV_IS_IN_NAND)
203 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
204 #define CONFIG_ENV_OFFSET		(28 * CONFIG_ENV_SECT_SIZE)
205 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
206 #endif
207 
208 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
209 /* NAND stuff */
210 #define CONFIG_SYS_MAX_NAND_DEVICE	1
211 #define CONFIG_SYS_NAND_BASE		0x40000000
212 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
213 #define CONFIG_SYS_NAND_ONFI_DETECTION
214 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
215 #endif
216 
217 /* USB Configs */
218 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
219 
220 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
221 #define CONFIG_MXC_USB_FLAGS		0
222 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
223 
224 #define CONFIG_IMX_THERMAL
225 
226 #define CONFIG_USBD_HS
227 
228 /* USB Device Firmware Update support */
229 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
230 #define DFU_DEFAULT_POLL_TIMEOUT	300
231 
232 #ifdef CONFIG_VIDEO
233 #define CONFIG_VIDEO_MXS
234 #define CONFIG_VIDEO_LOGO
235 #define CONFIG_SPLASH_SCREEN
236 #define CONFIG_SPLASH_SCREEN_ALIGN
237 #define CONFIG_BMP_16BPP
238 #define CONFIG_VIDEO_BMP_RLE8
239 #define CONFIG_VIDEO_BMP_LOGO
240 #endif
241 
242 #endif
243