1 /* 2 * Copyright 2013-2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex Colibri iMX6 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "mx6_common.h" 13 14 #undef CONFIG_DISPLAY_BOARDINFO 15 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ 16 17 #define CONFIG_SYS_GENERIC_BOARD 18 19 #include <asm/arch/imx-regs.h> 20 #include <asm/mach-imx/gpio.h> 21 22 #ifdef CONFIG_SPL 23 #include "imx6_spl.h" 24 #endif 25 26 #define CONFIG_CMDLINE_TAG 27 #define CONFIG_SETUP_MEMORY_TAGS 28 #define CONFIG_INITRD_TAG 29 #define CONFIG_REVISION_TAG 30 #define CONFIG_SERIAL_TAG 31 32 /* Size of malloc() pool */ 33 #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) 34 35 #define CONFIG_MISC_INIT_R 36 37 #define CONFIG_MXC_UART 38 #define CONFIG_MXC_UART_BASE UART1_BASE 39 40 /* Make the HW version stuff available in U-Boot env */ 41 #define CONFIG_VERSION_VARIABLE /* ver environment variable */ 42 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 43 44 /* I2C Configs */ 45 #define CONFIG_SYS_I2C 46 #define CONFIG_SYS_I2C_MXC 47 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 48 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 49 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 50 #define CONFIG_SYS_I2C_SPEED 100000 51 52 /* OCOTP Configs */ 53 #ifdef CONFIG_CMD_FUSE 54 #define CONFIG_MXC_OCOTP 55 #endif 56 57 /* MMC Configs */ 58 #define CONFIG_FSL_ESDHC 59 #define CONFIG_FSL_USDHC 60 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 61 #define CONFIG_SYS_FSL_USDHC_NUM 2 62 63 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 64 #define CONFIG_BOUNCE_BUFFER 65 66 /* Network */ 67 #define CONFIG_FEC_MXC 68 #define CONFIG_MII 69 #define IMX_FEC_BASE ENET_BASE_ADDR 70 #define CONFIG_FEC_XCV_TYPE RMII 71 #define CONFIG_ETHPRIME "FEC" 72 #define CONFIG_FEC_MXC_PHYADDR 1 73 #define CONFIG_IP_DEFRAG 74 #define CONFIG_TFTP_BLOCKSIZE 16352 75 #define CONFIG_TFTP_TSIZE 76 77 /* USB Configs */ 78 /* Host */ 79 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 80 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 81 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 82 #define CONFIG_MXC_USB_FLAGS 0 83 /* Client */ 84 #define CONFIG_USBD_HS 85 86 #define CONFIG_USB_GADGET_MASS_STORAGE 87 /* USB DFU */ 88 #define CONFIG_DFU_MMC 89 90 /* Miscellaneous commands */ 91 92 /* Framebuffer and LCD */ 93 #define CONFIG_VIDEO_IPUV3 94 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 95 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 96 #define CONFIG_VIDEO_BMP_RLE8 97 #define CONFIG_SPLASH_SCREEN 98 #define CONFIG_SPLASH_SCREEN_ALIGN 99 #define CONFIG_BMP_16BPP 100 #define CONFIG_VIDEO_LOGO 101 #define CONFIG_VIDEO_BMP_LOGO 102 #define CONFIG_CONSOLE_MUX 103 #define CONFIG_IMX_HDMI 104 #define CONFIG_IMX_VIDEO_SKIP 105 106 /* allow to overwrite serial and ethaddr */ 107 #define CONFIG_ENV_OVERWRITE 108 #define CONFIG_CONS_INDEX 1 109 110 /* Command definition */ 111 #undef CONFIG_CMD_LOADB 112 #undef CONFIG_CMD_LOADS 113 #undef CONFIG_CMD_NFS 114 #undef CONFIG_CMD_FLASH 115 116 #undef CONFIG_IPADDR 117 #define CONFIG_IPADDR 192.168.10.2 118 #define CONFIG_NETMASK 255.255.255.0 119 #undef CONFIG_SERVERIP 120 #define CONFIG_SERVERIP 192.168.10.1 121 122 #define CONFIG_LOADADDR 0x12000000 123 124 #ifdef CONFIG_CMD_MMC 125 #define CONFIG_DRIVE_MMC "mmc " 126 #else 127 #define CONFIG_DRIVE_MMC 128 #endif 129 130 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC 131 132 #define DFU_ALT_EMMC_INFO \ 133 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ 134 "boot part 0 1;" \ 135 "rootfs part 0 2;" \ 136 "uImage fat 0 1;" \ 137 "imx6q-colibri-eval-v3.dtb fat 0 1;" \ 138 "imx6q-colibri-cam-eval-v3.dtb fat 0 1" 139 140 #define EMMC_BOOTCMD \ 141 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \ 142 "rootwait\0" \ 143 "emmcboot=run setup; " \ 144 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ 145 "${vidargs}; echo Booting from internal eMMC chip...; " \ 146 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ 147 "${boot_file} && run fdt_fixup && " \ 148 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 149 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ 150 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 151 152 #define MEM_LAYOUT_ENV_SETTINGS \ 153 "bootm_size=0x10000000\0" \ 154 "fdt_addr_r=0x12000000\0" \ 155 "fdt_high=0xffffffff\0" \ 156 "initrd_high=0xffffffff\0" \ 157 "kernel_addr_r=0x11000000\0" \ 158 "ramdisk_addr_r=0x12100000\0" 159 160 #define NFS_BOOTCMD \ 161 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ 162 "nfsboot=run setup; " \ 163 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ 164 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ 165 "run nfsdtbload; dhcp ${kernel_addr_r} " \ 166 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ 167 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ 168 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 169 170 #define SD_BOOTCMD \ 171 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \ 172 "rootwait\0" \ 173 "sdboot=run setup; " \ 174 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ 175 "${vidargs}; echo Booting from SD card; " \ 176 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ 177 "${boot_file} && run fdt_fixup && " \ 178 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 179 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ 180 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 181 182 #define USB_BOOTCMD \ 183 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \ 184 "rootwait\0" \ 185 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ 186 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ 187 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ 188 "${boot_file} && run fdt_fixup && " \ 189 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 190 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ 191 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 192 193 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" 194 #define CONFIG_EXTRA_ENV_SETTINGS \ 195 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ 196 "run nfsboot ; echo ; echo nfsboot failed ; " \ 197 "usb start ;" \ 198 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ 199 "boot_file=uImage\0" \ 200 "console=ttymxc0\0" \ 201 "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ 202 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ 203 EMMC_BOOTCMD \ 204 "fdt_file=" FDT_FILE "\0" \ 205 "fdt_fixup=;\0" \ 206 MEM_LAYOUT_ENV_SETTINGS \ 207 NFS_BOOTCMD \ 208 SD_BOOTCMD \ 209 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ 210 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ 211 "flash_eth.img && source ${loadaddr}\0" \ 212 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ 213 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 214 "source ${loadaddr}\0" \ 215 "setup=setenv setupargs fec_mac=${ethaddr} " \ 216 "consoleblank=0 no_console_suspend=1 console=tty1 " \ 217 "console=${console},${baudrate}n8\0 " \ 218 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ 219 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ 220 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 221 "source ${loadaddr}\0" \ 222 "splashpos=m,m\0" \ 223 "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \ 224 "video=mxcfb1:off fbmem=8M\0 " 225 226 /* Miscellaneous configurable options */ 227 #undef CONFIG_SYS_CBSIZE 228 #define CONFIG_SYS_CBSIZE 1024 229 #undef CONFIG_SYS_MAXARGS 230 #define CONFIG_SYS_MAXARGS 48 231 232 #define CONFIG_SYS_ALT_MEMTEST 233 #define CONFIG_SYS_MEMTEST_START 0x10000000 234 #define CONFIG_SYS_MEMTEST_END 0x10010000 235 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 236 237 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 238 239 /* Physical Memory Map */ 240 #define CONFIG_NR_DRAM_BANKS 1 241 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 242 243 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 244 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 245 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 246 247 #define CONFIG_SYS_INIT_SP_OFFSET \ 248 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 249 #define CONFIG_SYS_INIT_SP_ADDR \ 250 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 251 252 /* environment organization */ 253 #define CONFIG_ENV_SIZE (8 * 1024) 254 255 #if defined(CONFIG_ENV_IS_IN_MMC) 256 /* Environment in eMMC, before config block at the end of 1st "boot sector" */ 257 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ 258 CONFIG_TDX_CFG_BLOCK_OFFSET) 259 #define CONFIG_SYS_MMC_ENV_DEV 0 260 #define CONFIG_SYS_MMC_ENV_PART 1 261 #endif 262 263 #define CONFIG_OF_SYSTEM_SETUP 264 265 #define CONFIG_CMD_TIME 266 267 #endif /* __CONFIG_H */ 268