1 /* 2 * Copyright 2013-2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex Colibri iMX6 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "mx6_common.h" 13 #define CONFIG_SYS_THUMB_BUILD 14 15 #undef CONFIG_DISPLAY_BOARDINFO 16 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ 17 18 #define CONFIG_SYS_GENERIC_BOARD 19 20 #include <asm/arch/imx-regs.h> 21 #include <asm/imx-common/gpio.h> 22 23 #ifdef CONFIG_SPL 24 #include "imx6_spl.h" 25 #define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */ 26 #endif 27 28 #define CONFIG_CMDLINE_TAG 29 #define CONFIG_SETUP_MEMORY_TAGS 30 #define CONFIG_INITRD_TAG 31 #define CONFIG_REVISION_TAG 32 #define CONFIG_SERIAL_TAG 33 34 /* Size of malloc() pool */ 35 #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) 36 37 #define CONFIG_BOARD_EARLY_INIT_F 38 #define CONFIG_BOARD_LATE_INIT 39 #define CONFIG_MISC_INIT_R 40 41 #define CONFIG_MXC_UART 42 #define CONFIG_MXC_UART_BASE UART1_BASE 43 44 /* Make the HW version stuff available in U-Boot env */ 45 #define CONFIG_VERSION_VARIABLE /* ver environment variable */ 46 #define CONFIG_ENV_VARS_UBOOT_CONFIG 47 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 48 49 /* I2C Configs */ 50 #define CONFIG_SYS_I2C 51 #define CONFIG_SYS_I2C_MXC 52 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 53 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 54 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 55 #define CONFIG_SYS_I2C_SPEED 100000 56 57 /* OCOTP Configs */ 58 #define CONFIG_CMD_FUSE 59 #ifdef CONFIG_CMD_FUSE 60 #define CONFIG_MXC_OCOTP 61 #endif 62 63 /* MMC Configs */ 64 #define CONFIG_FSL_ESDHC 65 #define CONFIG_FSL_USDHC 66 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 67 #define CONFIG_SYS_FSL_USDHC_NUM 2 68 69 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 70 #define CONFIG_GENERIC_MMC 71 #define CONFIG_BOUNCE_BUFFER 72 #define CONFIG_FAT_WRITE 73 #define CONFIG_DOS_PARTITION 74 75 /* Network */ 76 #define CONFIG_FEC_MXC 77 #define CONFIG_MII 78 #define IMX_FEC_BASE ENET_BASE_ADDR 79 #define CONFIG_FEC_XCV_TYPE RMII 80 #define CONFIG_ETHPRIME "FEC" 81 #define CONFIG_FEC_MXC_PHYADDR 1 82 #define CONFIG_PHYLIB 83 #define CONFIG_PHY_MICREL 84 #define CONFIG_IP_DEFRAG 85 #define CONFIG_TFTP_BLOCKSIZE 16352 86 #define CONFIG_TFTP_TSIZE 87 88 /* USB Configs */ 89 /* Host */ 90 #define CONFIG_USB_HOST_ETHER 91 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 92 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 93 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 94 #define CONFIG_MXC_USB_FLAGS 0 95 #define CONFIG_USB_KEYBOARD 96 #ifdef CONFIG_USB_KEYBOARD 97 #define CONFIG_SYS_USB_EVENT_POLL 98 #endif /* CONFIG_USB_KEYBOARD */ 99 /* Client */ 100 #define CONFIG_USB_GADGET_VBUS_DRAW 2 101 #define CONFIG_USBD_HS 102 103 #define CONFIG_USB_GADGET_MASS_STORAGE 104 #define CONFIG_USB_FUNCTION_MASS_STORAGE 105 #define CONFIG_G_DNL_MANUFACTURER "Toradex" 106 /* USB DFU */ 107 #define CONFIG_DFU_MMC 108 109 /* Miscellaneous commands */ 110 #define CONFIG_CMD_BMODE 111 #define CONFIG_MXC_GPIO 112 113 /* Framebuffer and LCD */ 114 #define CONFIG_VIDEO_IPUV3 115 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 116 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 117 #define CONFIG_VIDEO_BMP_RLE8 118 #define CONFIG_SPLASH_SCREEN 119 #define CONFIG_SPLASH_SCREEN_ALIGN 120 #define CONFIG_BMP_16BPP 121 #define CONFIG_VIDEO_LOGO 122 #define CONFIG_VIDEO_BMP_LOGO 123 #define CONFIG_IPUV3_CLK 260000000 124 #define CONFIG_CMD_HDMIDETECT 125 #define CONFIG_CONSOLE_MUX 126 #define CONFIG_IMX_HDMI 127 #define CONFIG_IMX_VIDEO_SKIP 128 #define CONFIG_CMD_BMP 129 130 /* allow to overwrite serial and ethaddr */ 131 #define CONFIG_ENV_OVERWRITE 132 #define CONFIG_CONS_INDEX 1 133 #define CONFIG_BAUDRATE 115200 134 135 /* Command definition */ 136 #undef CONFIG_CMD_LOADB 137 #undef CONFIG_CMD_LOADS 138 #undef CONFIG_CMD_NFS 139 #undef CONFIG_CMD_FLASH 140 141 #undef CONFIG_IPADDR 142 #define CONFIG_IPADDR 192.168.10.2 143 #define CONFIG_NETMASK 255.255.255.0 144 #undef CONFIG_SERVERIP 145 #define CONFIG_SERVERIP 192.168.10.1 146 147 #define CONFIG_LOADADDR 0x12000000 148 #define CONFIG_SYS_TEXT_BASE 0x17800000 149 150 #ifdef CONFIG_CMD_MMC 151 #define CONFIG_DRIVE_MMC "mmc " 152 #else 153 #define CONFIG_DRIVE_MMC 154 #endif 155 156 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC 157 158 #define DFU_ALT_EMMC_INFO \ 159 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ 160 "boot part 0 1;" \ 161 "rootfs part 0 2;" \ 162 "uImage fat 0 1;" \ 163 "imx6q-colibri-eval-v3.dtb fat 0 1;" \ 164 "imx6q-colibri-cam-eval-v3.dtb fat 0 1" 165 166 #define EMMC_BOOTCMD \ 167 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \ 168 "rootwait\0" \ 169 "emmcboot=run setup; " \ 170 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ 171 "${vidargs}; echo Booting from internal eMMC chip...; " \ 172 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ 173 "${boot_file} && run fdt_fixup && " \ 174 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 175 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ 176 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 177 178 #define MEM_LAYOUT_ENV_SETTINGS \ 179 "fdt_addr_r=0x12000000\0" \ 180 "fdt_high=0xffffffff\0" \ 181 "initrd_high=0xffffffff\0" \ 182 "kernel_addr_r=0x11000000\0" \ 183 "ramdisk_addr_r=0x12100000\0" 184 185 #define NFS_BOOTCMD \ 186 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ 187 "nfsboot=run setup; " \ 188 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ 189 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ 190 "run nfsdtbload; dhcp ${kernel_addr_r} " \ 191 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ 192 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ 193 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 194 195 #define SD_BOOTCMD \ 196 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \ 197 "rootwait\0" \ 198 "sdboot=run setup; " \ 199 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ 200 "${vidargs}; echo Booting from SD card; " \ 201 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ 202 "${boot_file} && run fdt_fixup && " \ 203 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 204 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ 205 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 206 207 #define USB_BOOTCMD \ 208 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \ 209 "rootwait\0" \ 210 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ 211 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ 212 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ 213 "${boot_file} && run fdt_fixup && " \ 214 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 215 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ 216 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 217 218 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" 219 #define CONFIG_EXTRA_ENV_SETTINGS \ 220 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ 221 "run nfsboot ; echo ; echo nfsboot failed ; " \ 222 "usb start ;" \ 223 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ 224 "boot_file=uImage\0" \ 225 "console=ttymxc0\0" \ 226 "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ 227 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ 228 EMMC_BOOTCMD \ 229 "fdt_file=" FDT_FILE "\0" \ 230 "fdt_fixup=;\0" \ 231 MEM_LAYOUT_ENV_SETTINGS \ 232 NFS_BOOTCMD \ 233 SD_BOOTCMD \ 234 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ 235 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ 236 "flash_eth.img && source ${loadaddr}\0" \ 237 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ 238 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 239 "source ${loadaddr}\0" \ 240 "setup=setenv setupargs fec_mac=${ethaddr} " \ 241 "consoleblank=0 no_console_suspend=1 console=tty1 " \ 242 "console=${console},${baudrate}n8\0 " \ 243 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ 244 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ 245 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 246 "source ${loadaddr}\0" \ 247 "splashpos=m,m\0" \ 248 "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \ 249 "video=mxcfb1:off fbmem=8M\0 " 250 251 /* Miscellaneous configurable options */ 252 #define CONFIG_SYS_LONGHELP 253 #define CONFIG_AUTO_COMPLETE 254 #undef CONFIG_SYS_CBSIZE 255 #define CONFIG_SYS_CBSIZE 1024 256 #undef CONFIG_SYS_MAXARGS 257 #define CONFIG_SYS_MAXARGS 48 258 259 #define CONFIG_SYS_ALT_MEMTEST 260 #define CONFIG_SYS_MEMTEST_START 0x10000000 261 #define CONFIG_SYS_MEMTEST_END 0x10010000 262 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 263 264 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 265 266 #define CONFIG_CMDLINE_EDITING 267 268 /* Physical Memory Map */ 269 #define CONFIG_NR_DRAM_BANKS 1 270 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 271 272 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 273 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 274 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 275 276 #define CONFIG_SYS_INIT_SP_OFFSET \ 277 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 278 #define CONFIG_SYS_INIT_SP_ADDR \ 279 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 280 281 /* FLASH and environment organization */ 282 #define CONFIG_SYS_NO_FLASH 283 284 #define CONFIG_ENV_SIZE (8 * 1024) 285 286 #define CONFIG_ENV_IS_IN_MMC 287 288 #if defined(CONFIG_ENV_IS_IN_MMC) 289 /* Environment in eMMC, before config block at the end of 1st "boot sector" */ 290 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ 291 CONFIG_TDX_CFG_BLOCK_OFFSET) 292 #define CONFIG_SYS_MMC_ENV_DEV 0 293 #define CONFIG_SYS_MMC_ENV_PART 1 294 #endif 295 296 #define CONFIG_OF_SYSTEM_SETUP 297 298 #define CONFIG_CMD_TIME 299 300 #define CONFIG_SUPPORT_RAW_INITRD 301 302 #define CONFIG_CRC32_VERIFY 303 304 #endif /* __CONFIG_H */ 305