1 /* 2 * cm_t43.h 3 * 4 * Copyright (C) 2015 Compulab, Ltd. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_CM_T43_H 10 #define __CONFIG_CM_T43_H 11 12 #define CONFIG_AM43XX 13 #define CONFIG_CM_T43 14 #define CONFIG_ARCH_CPU_INIT 15 #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */ 16 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 17 18 #include <asm/arch/omap.h> 19 20 /* Serial support */ 21 #define CONFIG_SYS_NS16550_SERIAL 22 #define CONFIG_SYS_NS16550_CLK 48000000 23 #define CONFIG_SYS_NS16550_COM1 0x44e09000 24 #ifdef CONFIG_SPL_BUILD 25 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 26 #endif 27 28 /* NAND support */ 29 #define CONFIG_NAND 30 #define CONFIG_NAND_OMAP_ELM 31 #define CONFIG_SYS_NAND_ONFI_DETECTION 32 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 33 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 34 #define CONFIG_SYS_NAND_OOBSIZE 64 35 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 36 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 37 #define CONFIG_SYS_NAND_ECCSIZE 512 38 #define CONFIG_SYS_NAND_ECCBYTES 14 39 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 40 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 41 CONFIG_SYS_NAND_PAGE_SIZE) 42 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 43 10, 11, 12, 13, 14, 15, 16, 17, \ 44 18, 19, 20, 21, 22, 23, 24, 25, \ 45 26, 27, 28, 29, 30, 31, 32, 33, \ 46 34, 35, 36, 37, 38, 39, 40, 41, \ 47 42, 43, 44, 45, 46, 47, 48, 49, \ 48 50, 51, 52, 53, 54, 55, 56, 57, } 49 50 /* CPSW Ethernet support */ 51 #define CONFIG_DRIVER_TI_CPSW 52 #define CONFIG_MII 53 #define CONFIG_BOOTP_DEFAULT 54 #define CONFIG_BOOTP_SEND_HOSTNAME 55 #define CONFIG_BOOTP_GATEWAY 56 #define CONFIG_NET_MULTI 57 #define CONFIG_PHY_GIGE 58 #define CONFIG_PHY_ATHEROS 59 #define CONFIG_PHYLIB 60 #define CONFIG_SYS_RX_ETH_BUFFER 64 61 62 /* USB support */ 63 #define CONFIG_USB_XHCI_OMAP 64 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 65 #define CONFIG_OMAP_USB_PHY 66 #define CONFIG_AM437X_USB2PHY2_HOST 67 68 /* SPI Flash support */ 69 #define CONFIG_TI_SPI_MMAP 70 #define CONFIG_SF_DEFAULT_SPEED 48000000 71 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 72 73 /* Power */ 74 #define CONFIG_POWER 75 #define CONFIG_POWER_I2C 76 #define CONFIG_POWER_TPS65218 77 78 /* Enabling L2 Cache */ 79 #define CONFIG_SYS_L2_PL310 80 #define CONFIG_SYS_PL310_BASE 0x48242000 81 82 /* 83 * Since SPL did pll and ddr initialization for us, 84 * we don't need to do it twice. 85 */ 86 #if !defined(CONFIG_SPL_BUILD) 87 #define CONFIG_SKIP_LOWLEVEL_INIT 88 #endif 89 90 #define CONFIG_HSMMC2_8BIT 91 92 #include <configs/ti_armv7_omap.h> 93 #undef CONFIG_SYS_MONITOR_LEN 94 95 #define CONFIG_ENV_SIZE (16 * 1024) 96 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 97 98 #define V_OSCK 24000000 /* Clock output from T2 */ 99 #define V_SCLK (V_OSCK) 100 101 #define CONFIG_ENV_IS_IN_SPI_FLASH 102 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 103 #define CONFIG_ENV_OFFSET (768 * 1024) 104 #define CONFIG_ENV_SPI_MAX_HZ 48000000 105 106 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 107 108 /* Enhance our eMMC support / experience. */ 109 #define CONFIG_CMD_GPT 110 #define CONFIG_EFI_PARTITION 111 112 #define CONFIG_EXTRA_ENV_SETTINGS \ 113 "loadaddr=0x80200000\0" \ 114 "fdtaddr=0x81200000\0" \ 115 "bootm_size=0x8000000\0" \ 116 "autoload=no\0" \ 117 "console=ttyO0,115200n8\0" \ 118 "fdtfile=am437x-sb-som-t43.dtb\0" \ 119 "kernel=zImage-cm-t43\0" \ 120 "bootscr=bootscr.img\0" \ 121 "emmcroot=/dev/mmcblk0p2 rw\0" \ 122 "emmcrootfstype=ext4 rootwait\0" \ 123 "emmcargs=setenv bootargs console=${console} " \ 124 "root=${emmcroot} " \ 125 "rootfstype=${emmcrootfstype}\0" \ 126 "loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \ 127 "bootscript=echo Running bootscript from mmc ...; " \ 128 "source ${loadaddr}\0" \ 129 "emmcboot=echo Booting from emmc ... && " \ 130 "run emmcargs && " \ 131 "load mmc 1 ${loadaddr} ${kernel} && " \ 132 "load mmc 1 ${fdtaddr} ${fdtfile} && " \ 133 "bootz ${loadaddr} - ${fdtaddr}\0" 134 135 #define CONFIG_BOOTCOMMAND \ 136 "mmc dev 0; " \ 137 "if mmc rescan; then " \ 138 "if run loadbootscript; then " \ 139 "run bootscript; " \ 140 "fi; " \ 141 "fi; " \ 142 "mmc dev 1; " \ 143 "if mmc rescan; then " \ 144 "run emmcboot; " \ 145 "fi;" 146 147 #define CONFIG_CONS_INDEX 1 148 149 /* SPL defines. */ 150 #define CONFIG_SPL_TEXT_BASE 0x40300350 151 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) 152 #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) 153 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 154 #define CONFIG_SPL_SPI_LOAD 155 156 /* EEPROM */ 157 #define CONFIG_CMD_EEPROM 158 #define CONFIG_ENV_EEPROM_IS_ON_I2C 159 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 160 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 161 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 162 #define CONFIG_SYS_EEPROM_SIZE 256 163 164 #define CONFIG_CMD_EEPROM_LAYOUT 165 #define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3" 166 167 #endif /* __CONFIG_CM_T43_H */ 168