1 /* 2 * cm_t43.h 3 * 4 * Copyright (C) 2015 Compulab, Ltd. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_CM_T43_H 10 #define __CONFIG_CM_T43_H 11 12 #define CONFIG_AM43XX 13 #define CONFIG_CM_T43 14 #define CONFIG_ARCH_CPU_INIT 15 #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */ 16 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 17 18 #include <asm/arch/omap.h> 19 20 /* Serial support */ 21 #define CONFIG_OMAP_SERIAL 22 #define CONFIG_DM_SERIAL 23 #define CONFIG_SYS_NS16550 24 #define CONFIG_SYS_NS16550_SERIAL 25 #define CONFIG_SYS_NS16550_CLK 48000000 26 #define CONFIG_SYS_NS16550_COM1 0x44e09000 27 28 /* NAND support */ 29 #define CONFIG_NAND 30 #define CONFIG_NAND_OMAP_ELM 31 #define CONFIG_SYS_NAND_ONFI_DETECTION 32 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 33 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 34 #define CONFIG_SYS_NAND_OOBSIZE 64 35 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 36 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 37 #define CONFIG_SYS_NAND_ECCSIZE 512 38 #define CONFIG_SYS_NAND_ECCBYTES 14 39 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 40 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 41 CONFIG_SYS_NAND_PAGE_SIZE) 42 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 43 10, 11, 12, 13, 14, 15, 16, 17, \ 44 18, 19, 20, 21, 22, 23, 24, 25, \ 45 26, 27, 28, 29, 30, 31, 32, 33, \ 46 34, 35, 36, 37, 38, 39, 40, 41, \ 47 42, 43, 44, 45, 46, 47, 48, 49, \ 48 50, 51, 52, 53, 54, 55, 56, 57, } 49 50 /* CPSW Ethernet support */ 51 #define CONFIG_DRIVER_TI_CPSW 52 #define CONFIG_MII 53 #define CONFIG_BOOTP_DEFAULT 54 #define CONFIG_BOOTP_SEND_HOSTNAME 55 #define CONFIG_BOOTP_GATEWAY 56 #define CONFIG_NET_MULTI 57 #define CONFIG_PHY_GIGE 58 #define CONFIG_PHY_ATHEROS 59 #define CONFIG_PHYLIB 60 #define CONFIG_SYS_RX_ETH_BUFFER 64 61 62 /* USB support */ 63 #define CONFIG_USB_HOST 64 #define CONFIG_USB_XHCI 65 #define CONFIG_USB_XHCI_OMAP 66 #define CONFIG_USB_XHCI_DWC3 67 #define CONFIG_USB_STORAGE 68 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 69 #define CONFIG_OMAP_USB_PHY 70 #define CONFIG_AM437X_USB2PHY2_HOST 71 72 /* SPI Flash support */ 73 #define CONFIG_SPI_FLASH 74 #define CONFIG_SPI_FLASH_MACRONIX 75 #define CONFIG_SPI_FLASH_ATMEL 76 #define CONFIG_SPI_FLASH_EON 77 #define CONFIG_SPI_FLASH_GIGADEVICE 78 #define CONFIG_SPI_FLASH_SPANSION 79 #define CONFIG_SPI_FLASH_STMICRO 80 #define CONFIG_SPI_FLASH_SST 81 #define CONFIG_SPI_FLASH_WINBOND 82 #define CONFIG_TI_SPI_MMAP 83 #define CONFIG_SPI_FLASH_BAR 84 #define CONFIG_SF_DEFAULT_SPEED 48000000 85 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 86 87 /* Power */ 88 #define CONFIG_POWER 89 #define CONFIG_POWER_I2C 90 #define CONFIG_POWER_TPS65218 91 92 /* Enabling L2 Cache */ 93 #define CONFIG_SYS_L2_PL310 94 #define CONFIG_SYS_PL310_BASE 0x48242000 95 #define CONFIG_SYS_CACHELINE_SIZE 32 96 97 /* 98 * Since SPL did pll and ddr initialization for us, 99 * we don't need to do it twice. 100 */ 101 #if !defined(CONFIG_SPL_BUILD) 102 #define CONFIG_SKIP_LOWLEVEL_INIT 103 #endif 104 105 #define CONFIG_HSMMC2_8BIT 106 107 #include <configs/ti_armv7_omap.h> 108 #undef CONFIG_SPL_OS_BOOT 109 #undef CONFIG_SPL_GPIO_SUPPORT 110 #undef CONFIG_SPL_NAND_SUPPORT 111 #undef CONFIG_SPL_BOARD_INIT 112 #undef CONFIG_BOOTDELAY 113 #include <config_distro_defaults.h> 114 #define CONFIG_ZERO_BOOTDELAY_CHECK 115 #undef CONFIG_CMD_IMLS 116 117 #define CONFIG_ENV_SIZE (16 * 1024) 118 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 119 120 #define V_OSCK 24000000 /* Clock output from T2 */ 121 #define V_SCLK (V_OSCK) 122 123 #define CONFIG_ENV_IS_IN_SPI_FLASH 124 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 125 #define CONFIG_ENV_OFFSET (768 * 1024) 126 #define CONFIG_ENV_SPI_MAX_HZ 48000000 127 128 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 129 130 /* Enhance our eMMC support / experience. */ 131 #define CONFIG_CMD_GPT 132 #define CONFIG_EFI_PARTITION 133 134 #define CONFIG_EXTRA_ENV_SETTINGS \ 135 "loadaddr=0x80200000\0" \ 136 "fdtaddr=0x81200000\0" \ 137 "bootm_size=0x8000000\0" \ 138 "autoload=no\0" \ 139 "console=ttyO0,115200n8\0" \ 140 "fdtfile=am437x-sb-som-t43.dtb\0" \ 141 "kernel=zImage-cm-t43\0" \ 142 "bootscr=bootscr.img\0" \ 143 "emmcroot=/dev/mmcblk0p2 rw\0" \ 144 "emmcrootfstype=ext4 rootwait\0" \ 145 "emmcargs=setenv bootargs console=${console} " \ 146 "root=${emmcroot} " \ 147 "rootfstype=${emmcrootfstype}\0" \ 148 "loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \ 149 "bootscript=echo Running bootscript from mmc ...; " \ 150 "source ${loadaddr}\0" \ 151 "emmcboot=echo Booting from emmc ... && " \ 152 "run emmcargs && " \ 153 "load mmc 1 ${loadaddr} ${kernel} && " \ 154 "load mmc 1 ${fdtaddr} ${fdtfile} && " \ 155 "bootz ${loadaddr} - ${fdtaddr}\0" 156 157 #define CONFIG_BOOTCOMMAND \ 158 "mmc dev 0; " \ 159 "if mmc rescan; then " \ 160 "if run loadbootscript; then " \ 161 "run bootscript; " \ 162 "fi; " \ 163 "fi; " \ 164 "mmc dev 1; " \ 165 "if mmc rescan; then " \ 166 "run emmcboot; " \ 167 "fi;" 168 169 170 #define CONFIG_CONS_INDEX 1 171 172 /* SPL defines. */ 173 #define CONFIG_SPL_TEXT_BASE 0x40300350 174 #define CONFIG_SPL_MAX_SIZE (64 * 1024) 175 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) 176 #define CONFIG_SPL_POWER_SUPPORT 177 #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) 178 #define CONFIG_SPL_SPI_SUPPORT 179 #define CONFIG_SPL_SPI_FLASH_SUPPORT 180 #define CONFIG_SPL_SPI_LOAD 181 182 #endif /* __CONFIG_CM_T43_H */ 183