xref: /openbmc/u-boot/include/configs/cm_t43.h (revision 3ba98ed8)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * cm_t43.h
4  *
5  * Copyright (C) 2015 Compulab, Ltd.
6  */
7 
8 #ifndef __CONFIG_CM_T43_H
9 #define __CONFIG_CM_T43_H
10 
11 #define CONFIG_CM_T43
12 #define CONFIG_ARCH_CPU_INIT
13 #define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2GB */
14 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
15 
16 #include <asm/arch/omap.h>
17 
18 /* Serial support */
19 #define CONFIG_SYS_NS16550_SERIAL
20 #define CONFIG_SYS_NS16550_CLK		48000000
21 #define CONFIG_SYS_NS16550_COM1		0x44e09000
22 #if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
23 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
24 #endif
25 
26 /* NAND support */
27 #define CONFIG_SYS_NAND_ONFI_DETECTION
28 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
29 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
30 #define CONFIG_SYS_NAND_OOBSIZE		64
31 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
32 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
33 #define CONFIG_SYS_NAND_ECCSIZE		512
34 #define CONFIG_SYS_NAND_ECCBYTES	14
35 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
36 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
37 					 CONFIG_SYS_NAND_PAGE_SIZE)
38 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
39 					 10, 11, 12, 13, 14, 15, 16, 17, \
40 					 18, 19, 20, 21, 22, 23, 24, 25, \
41 					 26, 27, 28, 29, 30, 31, 32, 33, \
42 					 34, 35, 36, 37, 38, 39, 40, 41, \
43 					 42, 43, 44, 45, 46, 47, 48, 49, \
44 					 50, 51, 52, 53, 54, 55, 56, 57, }
45 
46 /* CPSW Ethernet support */
47 #define CONFIG_BOOTP_DEFAULT
48 #define CONFIG_BOOTP_SEND_HOSTNAME
49 #define CONFIG_PHY_ATHEROS
50 #define CONFIG_SYS_RX_ETH_BUFFER	64
51 
52 /* USB support */
53 #define CONFIG_USB_XHCI_OMAP
54 #define CONFIG_AM437X_USB2PHY2_HOST
55 
56 /* SPI Flash support */
57 #define CONFIG_TI_SPI_MMAP
58 
59 /* Power */
60 #define CONFIG_POWER
61 #define CONFIG_POWER_I2C
62 #define CONFIG_POWER_TPS65218
63 
64 /* Enabling L2 Cache */
65 #define CONFIG_SYS_L2_PL310
66 #define CONFIG_SYS_PL310_BASE		0x48242000
67 
68 /*
69  * Since SPL did pll and ddr initialization for us,
70  * we don't need to do it twice.
71  */
72 #if !defined(CONFIG_SPL_BUILD)
73 #define CONFIG_SKIP_LOWLEVEL_INIT
74 #endif
75 
76 #define CONFIG_HSMMC2_8BIT
77 
78 #include <configs/ti_armv7_omap.h>
79 #undef CONFIG_SYS_MONITOR_LEN
80 
81 #define CONFIG_ENV_SIZE			(16 * 1024)
82 
83 #define V_OSCK				24000000  /* Clock output from T2 */
84 #define V_SCLK				(V_OSCK)
85 
86 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
87 #define CONFIG_ENV_OFFSET		(768 * 1024)
88 
89 #define CONFIG_EXTRA_ENV_SETTINGS \
90 	"loadaddr=0x80200000\0" \
91 	"fdtaddr=0x81200000\0" \
92 	"bootm_size=0x8000000\0" \
93 	"autoload=no\0" \
94 	"console=ttyO0,115200n8\0" \
95 	"fdtfile=am437x-sb-som-t43.dtb\0" \
96 	"kernel=zImage-cm-t43\0" \
97 	"bootscr=bootscr.img\0" \
98 	"emmcroot=/dev/mmcblk0p2 rw\0" \
99 	"emmcrootfstype=ext4 rootwait\0" \
100 	"emmcargs=setenv bootargs console=${console} " \
101 		"root=${emmcroot} " \
102 		"rootfstype=${emmcrootfstype}\0" \
103 	"loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
104 	"bootscript=echo Running bootscript from mmc ...; " \
105 		"source ${loadaddr}\0" \
106 	"emmcboot=echo Booting from emmc ... && " \
107 		"run emmcargs && " \
108 		"load mmc 1 ${loadaddr} ${kernel} && " \
109 		"load mmc 1 ${fdtaddr} ${fdtfile} && " \
110 		"bootz ${loadaddr} - ${fdtaddr}\0"
111 
112 #define CONFIG_BOOTCOMMAND \
113 	"mmc dev 0; " \
114 	"if mmc rescan; then " \
115 		"if run loadbootscript; then " \
116 			"run bootscript; " \
117 		"fi; " \
118 	"fi; " \
119 	"mmc dev 1; " \
120 	"if mmc rescan; then " \
121 		"run emmcboot; " \
122 	"fi;"
123 
124 /* SPL defines. */
125 #define CONFIG_SPL_TEXT_BASE		0x40300350
126 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
127 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
128 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
129 
130 /* EEPROM */
131 #define CONFIG_ENV_EEPROM_IS_ON_I2C
132 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
133 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
134 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
135 #define CONFIG_SYS_EEPROM_SIZE			256
136 
137 #endif	/* __CONFIG_CM_T43_H */
138