xref: /openbmc/u-boot/include/configs/cm_t43.h (revision 09d84117)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * cm_t43.h
4  *
5  * Copyright (C) 2015 Compulab, Ltd.
6  */
7 
8 #ifndef __CONFIG_CM_T43_H
9 #define __CONFIG_CM_T43_H
10 
11 #define CONFIG_CM_T43
12 #define CONFIG_ARCH_CPU_INIT
13 #define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2GB */
14 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
15 
16 #include <asm/arch/omap.h>
17 
18 /* Serial support */
19 #define CONFIG_SYS_NS16550_SERIAL
20 #define CONFIG_SYS_NS16550_CLK		48000000
21 #define CONFIG_SYS_NS16550_COM1		0x44e09000
22 #if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
23 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
24 #endif
25 
26 /* NAND support */
27 #define CONFIG_SYS_NAND_ONFI_DETECTION
28 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
29 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
30 #define CONFIG_SYS_NAND_OOBSIZE		64
31 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
32 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
33 #define CONFIG_SYS_NAND_ECCSIZE		512
34 #define CONFIG_SYS_NAND_ECCBYTES	14
35 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
36 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
37 					 CONFIG_SYS_NAND_PAGE_SIZE)
38 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
39 					 10, 11, 12, 13, 14, 15, 16, 17, \
40 					 18, 19, 20, 21, 22, 23, 24, 25, \
41 					 26, 27, 28, 29, 30, 31, 32, 33, \
42 					 34, 35, 36, 37, 38, 39, 40, 41, \
43 					 42, 43, 44, 45, 46, 47, 48, 49, \
44 					 50, 51, 52, 53, 54, 55, 56, 57, }
45 
46 /* CPSW Ethernet support */
47 #define CONFIG_BOOTP_DEFAULT
48 #define CONFIG_BOOTP_SEND_HOSTNAME
49 #define CONFIG_PHY_ATHEROS
50 #define CONFIG_SYS_RX_ETH_BUFFER	64
51 
52 /* USB support */
53 #define CONFIG_USB_XHCI_OMAP
54 #define CONFIG_AM437X_USB2PHY2_HOST
55 
56 /* SPI Flash support */
57 #define CONFIG_TI_SPI_MMAP
58 #define CONFIG_SF_DEFAULT_SPEED		48000000
59 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3
60 
61 /* Power */
62 #define CONFIG_POWER
63 #define CONFIG_POWER_I2C
64 #define CONFIG_POWER_TPS65218
65 
66 /* Enabling L2 Cache */
67 #define CONFIG_SYS_L2_PL310
68 #define CONFIG_SYS_PL310_BASE		0x48242000
69 
70 /*
71  * Since SPL did pll and ddr initialization for us,
72  * we don't need to do it twice.
73  */
74 #if !defined(CONFIG_SPL_BUILD)
75 #define CONFIG_SKIP_LOWLEVEL_INIT
76 #endif
77 
78 #define CONFIG_HSMMC2_8BIT
79 
80 #include <configs/ti_armv7_omap.h>
81 #undef CONFIG_SYS_MONITOR_LEN
82 
83 #define CONFIG_ENV_SIZE			(16 * 1024)
84 
85 #define V_OSCK				24000000  /* Clock output from T2 */
86 #define V_SCLK				(V_OSCK)
87 
88 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
89 #define CONFIG_ENV_OFFSET		(768 * 1024)
90 #define CONFIG_ENV_SPI_MAX_HZ           48000000
91 
92 #define CONFIG_EXTRA_ENV_SETTINGS \
93 	"loadaddr=0x80200000\0" \
94 	"fdtaddr=0x81200000\0" \
95 	"bootm_size=0x8000000\0" \
96 	"autoload=no\0" \
97 	"console=ttyO0,115200n8\0" \
98 	"fdtfile=am437x-sb-som-t43.dtb\0" \
99 	"kernel=zImage-cm-t43\0" \
100 	"bootscr=bootscr.img\0" \
101 	"emmcroot=/dev/mmcblk0p2 rw\0" \
102 	"emmcrootfstype=ext4 rootwait\0" \
103 	"emmcargs=setenv bootargs console=${console} " \
104 		"root=${emmcroot} " \
105 		"rootfstype=${emmcrootfstype}\0" \
106 	"loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
107 	"bootscript=echo Running bootscript from mmc ...; " \
108 		"source ${loadaddr}\0" \
109 	"emmcboot=echo Booting from emmc ... && " \
110 		"run emmcargs && " \
111 		"load mmc 1 ${loadaddr} ${kernel} && " \
112 		"load mmc 1 ${fdtaddr} ${fdtfile} && " \
113 		"bootz ${loadaddr} - ${fdtaddr}\0"
114 
115 #define CONFIG_BOOTCOMMAND \
116 	"mmc dev 0; " \
117 	"if mmc rescan; then " \
118 		"if run loadbootscript; then " \
119 			"run bootscript; " \
120 		"fi; " \
121 	"fi; " \
122 	"mmc dev 1; " \
123 	"if mmc rescan; then " \
124 		"run emmcboot; " \
125 	"fi;"
126 
127 /* SPL defines. */
128 #define CONFIG_SPL_TEXT_BASE		0x40300350
129 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
130 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
131 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
132 
133 /* EEPROM */
134 #define CONFIG_ENV_EEPROM_IS_ON_I2C
135 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
136 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
137 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
138 #define CONFIG_SYS_EEPROM_SIZE			256
139 
140 #endif	/* __CONFIG_CM_T43_H */
141