1 /* 2 * (C) Copyright 2013 CompuLab, Ltd. 3 * Author: Igor Grinberg <grinberg@compulab.co.il> 4 * 5 * Configuration settings for the CompuLab CM-T3517 board 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* 14 * High Level Configuration Options 15 */ 16 #define CONFIG_OMAP /* in a TI OMAP core */ 17 #define CONFIG_CM_T3517 /* working with CM-T3517 */ 18 19 #define CONFIG_SYS_TEXT_BASE 0x80008000 20 21 /* 22 * This is needed for the DMA stuff. 23 * Although the default iss 64, we still define it 24 * to be on the safe side once the default is changed. 25 */ 26 27 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 28 29 #include <asm/arch/cpu.h> /* get chip and board defs */ 30 #include <asm/arch/omap.h> 31 32 #define CONFIG_MACH_TYPE MACH_TYPE_CM_T3517 33 34 /* Clock Defines */ 35 #define V_OSCK 26000000 /* Clock output from T2 */ 36 #define V_SCLK (V_OSCK >> 1) 37 38 #define CONFIG_MISC_INIT_R 39 40 /* 41 * The early kernel mapping on ARM currently only maps from the base of DRAM 42 * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. 43 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, 44 * so that leaves DRAM base to DRAM base + 0x4000 available. 45 */ 46 #define CONFIG_SYS_BOOTMAPSZ 0x4000 47 48 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 49 #define CONFIG_SETUP_MEMORY_TAGS 50 #define CONFIG_INITRD_TAG 51 #define CONFIG_REVISION_TAG 52 #define CONFIG_SERIAL_TAG 53 54 /* 55 * Size of malloc() pool 56 */ 57 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 58 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 59 60 /* 61 * Hardware drivers 62 */ 63 64 /* 65 * NS16550 Configuration 66 */ 67 #define CONFIG_SYS_NS16550_SERIAL 68 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 69 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 70 71 /* 72 * select serial console configuration 73 */ 74 #define CONFIG_CONS_INDEX 3 75 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 76 #define CONFIG_SERIAL3 3 /* UART3 */ 77 78 /* allow to overwrite serial and ethaddr */ 79 #define CONFIG_ENV_OVERWRITE 80 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 81 115200} 82 83 #define CONFIG_OMAP_GPIO 84 85 /* USB */ 86 #define CONFIG_USB_MUSB_AM35X 87 88 #ifndef CONFIG_USB_MUSB_AM35X 89 #define CONFIG_USB_OMAP3 90 #define CONFIG_USB_EHCI 91 #define CONFIG_USB_EHCI_OMAP 92 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 93 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 94 #else /* !CONFIG_USB_MUSB_AM35X */ 95 #define CONFIG_USB_MUSB_PIO_ONLY 96 #endif /* CONFIG_USB_MUSB_AM35X */ 97 98 /* commands to include */ 99 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 100 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 101 #define CONFIG_MTD_PARTITIONS 102 #define MTDIDS_DEFAULT "nand0=nand" 103 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 104 "1920k(u-boot),256k(u-boot-env),"\ 105 "4m(kernel),-(fs)" 106 107 #define CONFIG_CMD_NAND /* NAND support */ 108 109 #define CONFIG_SYS_I2C 110 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000 111 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 112 #define CONFIG_SYS_I2C_OMAP34XX 113 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 114 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 115 #define CONFIG_SYS_I2C_EEPROM_BUS 0 116 #define CONFIG_I2C_MULTI_BUS 117 118 /* 119 * Board NAND Info. 120 */ 121 #define CONFIG_NAND_OMAP_GPMC 122 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 123 /* to access nand */ 124 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 125 /* to access nand at */ 126 /* CS0 */ 127 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 128 /* devices */ 129 130 /* Environment information */ 131 #define CONFIG_EXTRA_ENV_SETTINGS \ 132 "loadaddr=0x82000000\0" \ 133 "baudrate=115200\0" \ 134 "console=ttyO2,115200n8\0" \ 135 "netretry=yes\0" \ 136 "mpurate=auto\0" \ 137 "vram=12M\0" \ 138 "dvimode=1024x768MR-16@60\0" \ 139 "defaultdisplay=dvi\0" \ 140 "mmcdev=0\0" \ 141 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ 142 "mmcrootfstype=ext4\0" \ 143 "nandroot=/dev/mtdblock4 rw\0" \ 144 "nandrootfstype=ubifs\0" \ 145 "mmcargs=setenv bootargs console=${console} " \ 146 "mpurate=${mpurate} " \ 147 "vram=${vram} " \ 148 "omapfb.mode=dvi:${dvimode} " \ 149 "omapdss.def_disp=${defaultdisplay} " \ 150 "root=${mmcroot} " \ 151 "rootfstype=${mmcrootfstype}\0" \ 152 "nandargs=setenv bootargs console=${console} " \ 153 "mpurate=${mpurate} " \ 154 "vram=${vram} " \ 155 "omapfb.mode=dvi:${dvimode} " \ 156 "omapdss.def_disp=${defaultdisplay} " \ 157 "root=${nandroot} " \ 158 "rootfstype=${nandrootfstype}\0" \ 159 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 160 "bootscript=echo Running bootscript from mmc ...; " \ 161 "source ${loadaddr}\0" \ 162 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 163 "mmcboot=echo Booting from mmc ...; " \ 164 "run mmcargs; " \ 165 "bootm ${loadaddr}\0" \ 166 "nandboot=echo Booting from nand ...; " \ 167 "run nandargs; " \ 168 "nand read ${loadaddr} 2a0000 400000; " \ 169 "bootm ${loadaddr}\0" \ 170 171 #define CONFIG_BOOTCOMMAND \ 172 "mmc dev ${mmcdev}; if mmc rescan; then " \ 173 "if run loadbootscript; then " \ 174 "run bootscript; " \ 175 "else " \ 176 "if run loaduimage; then " \ 177 "run mmcboot; " \ 178 "else run nandboot; " \ 179 "fi; " \ 180 "fi; " \ 181 "else run nandboot; fi" 182 183 /* 184 * Miscellaneous configurable options 185 */ 186 #define CONFIG_AUTO_COMPLETE 187 #define CONFIG_CMDLINE_EDITING 188 #define CONFIG_TIMESTAMP 189 #define CONFIG_SYS_AUTOLOAD "no" 190 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 191 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 192 /* Print Buffer Size */ 193 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 194 sizeof(CONFIG_SYS_PROMPT) + 16) 195 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 196 /* Boot Argument Buffer Size */ 197 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 198 199 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) 200 201 /* 202 * AM3517 has 12 GP timers, they can be driven by the system clock 203 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 204 * This rate is divided by a local divisor. 205 */ 206 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 207 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 208 #define CONFIG_SYS_HZ 1000 209 210 /*----------------------------------------------------------------------- 211 * Physical Memory Map 212 */ 213 #define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ 214 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 215 #define CONFIG_SYS_CS0_SIZE (256 << 20) 216 217 /*----------------------------------------------------------------------- 218 * FLASH and environment organization 219 */ 220 221 /* **** PISMO SUPPORT *** */ 222 /* Monitor at start of flash */ 223 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 224 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 225 226 #define CONFIG_ENV_IS_IN_NAND 227 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 228 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 229 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 230 231 #if defined(CONFIG_CMD_NET) 232 #define CONFIG_DRIVER_TI_EMAC 233 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 234 #define CONFIG_MII 235 #define CONFIG_SMC911X 236 #define CONFIG_SMC911X_32_BIT 237 #define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) 238 #define CONFIG_ARP_TIMEOUT 200UL 239 #define CONFIG_NET_RETRY_COUNT 5 240 #endif /* CONFIG_CMD_NET */ 241 242 /* additions for new relocation code, must be added to all boards */ 243 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 244 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 245 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 246 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 247 CONFIG_SYS_INIT_RAM_SIZE - \ 248 GENERATED_GBL_DATA_SIZE) 249 250 /* Status LED */ 251 #define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ 252 253 /* GPIO banks */ 254 #ifdef CONFIG_LED_STATUS 255 #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ 256 #endif 257 258 /* Display Configuration */ 259 #define CONFIG_OMAP3_GPIO_2 260 #define CONFIG_OMAP3_GPIO_5 261 #define CONFIG_VIDEO_OMAP3 262 #define LCD_BPP LCD_COLOR16 263 264 #define CONFIG_SPLASH_SCREEN 265 #define CONFIG_SPLASHIMAGE_GUARD 266 #define CONFIG_BMP_16BPP 267 #define CONFIG_SCF0403_LCD 268 269 #define CONFIG_OMAP3_SPI 270 271 /* EEPROM */ 272 #define CONFIG_CMD_EEPROM 273 #define CONFIG_ENV_EEPROM_IS_ON_I2C 274 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 275 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 276 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 277 #define CONFIG_SYS_EEPROM_SIZE 256 278 279 #define CONFIG_CMD_EEPROM_LAYOUT 280 #define CONFIG_EEPROM_LAYOUT_HELP_STRING "v1, v2, v3" 281 282 #endif /* __CONFIG_H */ 283