1 /* 2 * (C) Copyright 2013 CompuLab, Ltd. 3 * Author: Igor Grinberg <grinberg@compulab.co.il> 4 * 5 * Configuration settings for the CompuLab CM-T3517 board 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* 14 * High Level Configuration Options 15 */ 16 #define CONFIG_CM_T3517 /* working with CM-T3517 */ 17 18 #define CONFIG_SYS_TEXT_BASE 0x80008000 19 20 /* 21 * This is needed for the DMA stuff. 22 * Although the default iss 64, we still define it 23 * to be on the safe side once the default is changed. 24 */ 25 26 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 27 28 #include <asm/arch/cpu.h> /* get chip and board defs */ 29 #include <asm/arch/omap.h> 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_CM_T3517 32 33 /* Clock Defines */ 34 #define V_OSCK 26000000 /* Clock output from T2 */ 35 #define V_SCLK (V_OSCK >> 1) 36 37 #define CONFIG_MISC_INIT_R 38 39 /* 40 * The early kernel mapping on ARM currently only maps from the base of DRAM 41 * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. 42 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, 43 * so that leaves DRAM base to DRAM base + 0x4000 available. 44 */ 45 #define CONFIG_SYS_BOOTMAPSZ 0x4000 46 47 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 48 #define CONFIG_SETUP_MEMORY_TAGS 49 #define CONFIG_INITRD_TAG 50 #define CONFIG_REVISION_TAG 51 #define CONFIG_SERIAL_TAG 52 53 /* 54 * Size of malloc() pool 55 */ 56 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 57 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 58 59 /* 60 * Hardware drivers 61 */ 62 63 /* 64 * NS16550 Configuration 65 */ 66 #define CONFIG_SYS_NS16550_SERIAL 67 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 68 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 69 70 /* 71 * select serial console configuration 72 */ 73 #define CONFIG_CONS_INDEX 3 74 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 75 #define CONFIG_SERIAL3 3 /* UART3 */ 76 77 /* allow to overwrite serial and ethaddr */ 78 #define CONFIG_ENV_OVERWRITE 79 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 80 115200} 81 82 /* USB */ 83 #define CONFIG_USB_MUSB_AM35X 84 85 #ifndef CONFIG_USB_MUSB_AM35X 86 #define CONFIG_USB_OMAP3 87 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 88 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 89 #else /* !CONFIG_USB_MUSB_AM35X */ 90 #define CONFIG_USB_MUSB_PIO_ONLY 91 #endif /* CONFIG_USB_MUSB_AM35X */ 92 93 /* commands to include */ 94 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 95 #define CONFIG_MTD_PARTITIONS 96 #define MTDIDS_DEFAULT "nand0=nand" 97 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 98 "1920k(u-boot),256k(u-boot-env),"\ 99 "4m(kernel),-(fs)" 100 101 #define CONFIG_SYS_I2C 102 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000 103 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 104 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 105 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 106 #define CONFIG_SYS_I2C_EEPROM_BUS 0 107 #define CONFIG_I2C_MULTI_BUS 108 109 /* 110 * Board NAND Info. 111 */ 112 #define CONFIG_NAND_OMAP_GPMC 113 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 114 /* to access nand */ 115 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 116 /* to access nand at */ 117 /* CS0 */ 118 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 119 /* devices */ 120 121 /* Environment information */ 122 #define CONFIG_EXTRA_ENV_SETTINGS \ 123 "loadaddr=0x82000000\0" \ 124 "baudrate=115200\0" \ 125 "console=ttyO2,115200n8\0" \ 126 "netretry=yes\0" \ 127 "mpurate=auto\0" \ 128 "vram=12M\0" \ 129 "dvimode=1024x768MR-16@60\0" \ 130 "defaultdisplay=dvi\0" \ 131 "mmcdev=0\0" \ 132 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ 133 "mmcrootfstype=ext4\0" \ 134 "nandroot=/dev/mtdblock4 rw\0" \ 135 "nandrootfstype=ubifs\0" \ 136 "mmcargs=setenv bootargs console=${console} " \ 137 "mpurate=${mpurate} " \ 138 "vram=${vram} " \ 139 "omapfb.mode=dvi:${dvimode} " \ 140 "omapdss.def_disp=${defaultdisplay} " \ 141 "root=${mmcroot} " \ 142 "rootfstype=${mmcrootfstype}\0" \ 143 "nandargs=setenv bootargs console=${console} " \ 144 "mpurate=${mpurate} " \ 145 "vram=${vram} " \ 146 "omapfb.mode=dvi:${dvimode} " \ 147 "omapdss.def_disp=${defaultdisplay} " \ 148 "root=${nandroot} " \ 149 "rootfstype=${nandrootfstype}\0" \ 150 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 151 "bootscript=echo Running bootscript from mmc ...; " \ 152 "source ${loadaddr}\0" \ 153 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 154 "mmcboot=echo Booting from mmc ...; " \ 155 "run mmcargs; " \ 156 "bootm ${loadaddr}\0" \ 157 "nandboot=echo Booting from nand ...; " \ 158 "run nandargs; " \ 159 "nand read ${loadaddr} 2a0000 400000; " \ 160 "bootm ${loadaddr}\0" \ 161 162 #define CONFIG_BOOTCOMMAND \ 163 "mmc dev ${mmcdev}; if mmc rescan; then " \ 164 "if run loadbootscript; then " \ 165 "run bootscript; " \ 166 "else " \ 167 "if run loaduimage; then " \ 168 "run mmcboot; " \ 169 "else run nandboot; " \ 170 "fi; " \ 171 "fi; " \ 172 "else run nandboot; fi" 173 174 /* 175 * Miscellaneous configurable options 176 */ 177 #define CONFIG_AUTO_COMPLETE 178 #define CONFIG_CMDLINE_EDITING 179 #define CONFIG_TIMESTAMP 180 #define CONFIG_SYS_AUTOLOAD "no" 181 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 182 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 183 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 184 185 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) 186 187 /* 188 * AM3517 has 12 GP timers, they can be driven by the system clock 189 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 190 * This rate is divided by a local divisor. 191 */ 192 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 193 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 194 #define CONFIG_SYS_HZ 1000 195 196 /*----------------------------------------------------------------------- 197 * Physical Memory Map 198 */ 199 #define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ 200 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 201 #define CONFIG_SYS_CS0_SIZE (256 << 20) 202 203 /*----------------------------------------------------------------------- 204 * FLASH and environment organization 205 */ 206 207 /* **** PISMO SUPPORT *** */ 208 /* Monitor at start of flash */ 209 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 210 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 211 212 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 213 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 214 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 215 216 #if defined(CONFIG_CMD_NET) 217 #define CONFIG_DRIVER_TI_EMAC 218 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 219 #define CONFIG_MII 220 #define CONFIG_SMC911X 221 #define CONFIG_SMC911X_32_BIT 222 #define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) 223 #define CONFIG_ARP_TIMEOUT 200UL 224 #define CONFIG_NET_RETRY_COUNT 5 225 #endif /* CONFIG_CMD_NET */ 226 227 /* additions for new relocation code, must be added to all boards */ 228 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 229 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 230 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 231 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 232 CONFIG_SYS_INIT_RAM_SIZE - \ 233 GENERATED_GBL_DATA_SIZE) 234 235 /* Status LED */ 236 #define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ 237 238 /* Display Configuration */ 239 #define CONFIG_VIDEO_OMAP3 240 #define LCD_BPP LCD_COLOR16 241 242 #define CONFIG_SPLASH_SCREEN 243 #define CONFIG_SPLASHIMAGE_GUARD 244 #define CONFIG_BMP_16BPP 245 #define CONFIG_SCF0403_LCD 246 247 /* EEPROM */ 248 #define CONFIG_ENV_EEPROM_IS_ON_I2C 249 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 250 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 251 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 252 #define CONFIG_SYS_EEPROM_SIZE 256 253 254 #endif /* __CONFIG_H */ 255