1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2013 CompuLab, Ltd. 4 * Author: Igor Grinberg <grinberg@compulab.co.il> 5 * 6 * Configuration settings for the CompuLab CM-T3517 board 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 /* 13 * High Level Configuration Options 14 */ 15 #define CONFIG_CM_T3517 /* working with CM-T3517 */ 16 17 /* 18 * This is needed for the DMA stuff. 19 * Although the default iss 64, we still define it 20 * to be on the safe side once the default is changed. 21 */ 22 23 #include <asm/arch/cpu.h> /* get chip and board defs */ 24 #include <asm/arch/omap.h> 25 26 #define CONFIG_MACH_TYPE MACH_TYPE_CM_T3517 27 28 /* Clock Defines */ 29 #define V_OSCK 26000000 /* Clock output from T2 */ 30 #define V_SCLK (V_OSCK >> 1) 31 32 #define CONFIG_MISC_INIT_R 33 34 /* 35 * The early kernel mapping on ARM currently only maps from the base of DRAM 36 * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. 37 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, 38 * so that leaves DRAM base to DRAM base + 0x4000 available. 39 */ 40 #define CONFIG_SYS_BOOTMAPSZ 0x4000 41 42 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 43 #define CONFIG_SETUP_MEMORY_TAGS 44 #define CONFIG_INITRD_TAG 45 #define CONFIG_REVISION_TAG 46 #define CONFIG_SERIAL_TAG 47 48 /* 49 * Size of malloc() pool 50 */ 51 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 52 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 53 54 /* 55 * Hardware drivers 56 */ 57 58 /* 59 * NS16550 Configuration 60 */ 61 #define CONFIG_SYS_NS16550_SERIAL 62 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 63 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 64 65 /* 66 * select serial console configuration 67 */ 68 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 69 #define CONFIG_SERIAL3 3 /* UART3 */ 70 71 /* allow to overwrite serial and ethaddr */ 72 #define CONFIG_ENV_OVERWRITE 73 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 74 115200} 75 76 /* USB */ 77 78 #ifndef CONFIG_USB_MUSB_AM35X 79 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 80 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 81 #endif /* CONFIG_USB_MUSB_AM35X */ 82 83 /* commands to include */ 84 85 #define CONFIG_SYS_I2C 86 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 87 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 88 #define CONFIG_SYS_I2C_EEPROM_BUS 0 89 #define CONFIG_I2C_MULTI_BUS 90 91 /* 92 * Board NAND Info. 93 */ 94 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 95 /* to access nand */ 96 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 97 /* to access nand at */ 98 /* CS0 */ 99 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 100 /* devices */ 101 102 /* Environment information */ 103 #define CONFIG_EXTRA_ENV_SETTINGS \ 104 "loadaddr=0x82000000\0" \ 105 "baudrate=115200\0" \ 106 "console=ttyO2,115200n8\0" \ 107 "netretry=yes\0" \ 108 "mpurate=auto\0" \ 109 "vram=12M\0" \ 110 "dvimode=1024x768MR-16@60\0" \ 111 "defaultdisplay=dvi\0" \ 112 "mmcdev=0\0" \ 113 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ 114 "mmcrootfstype=ext4\0" \ 115 "nandroot=/dev/mtdblock4 rw\0" \ 116 "nandrootfstype=ubifs\0" \ 117 "mmcargs=setenv bootargs console=${console} " \ 118 "mpurate=${mpurate} " \ 119 "vram=${vram} " \ 120 "omapfb.mode=dvi:${dvimode} " \ 121 "omapdss.def_disp=${defaultdisplay} " \ 122 "root=${mmcroot} " \ 123 "rootfstype=${mmcrootfstype}\0" \ 124 "nandargs=setenv bootargs console=${console} " \ 125 "mpurate=${mpurate} " \ 126 "vram=${vram} " \ 127 "omapfb.mode=dvi:${dvimode} " \ 128 "omapdss.def_disp=${defaultdisplay} " \ 129 "root=${nandroot} " \ 130 "rootfstype=${nandrootfstype}\0" \ 131 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 132 "bootscript=echo Running bootscript from mmc ...; " \ 133 "source ${loadaddr}\0" \ 134 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 135 "mmcboot=echo Booting from mmc ...; " \ 136 "run mmcargs; " \ 137 "bootm ${loadaddr}\0" \ 138 "nandboot=echo Booting from nand ...; " \ 139 "run nandargs; " \ 140 "nand read ${loadaddr} 2a0000 400000; " \ 141 "bootm ${loadaddr}\0" \ 142 143 #define CONFIG_BOOTCOMMAND \ 144 "mmc dev ${mmcdev}; if mmc rescan; then " \ 145 "if run loadbootscript; then " \ 146 "run bootscript; " \ 147 "else " \ 148 "if run loaduimage; then " \ 149 "run mmcboot; " \ 150 "else run nandboot; " \ 151 "fi; " \ 152 "fi; " \ 153 "else run nandboot; fi" 154 155 /* 156 * Miscellaneous configurable options 157 */ 158 #define CONFIG_TIMESTAMP 159 #define CONFIG_SYS_AUTOLOAD "no" 160 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 161 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 162 163 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) 164 165 /* 166 * AM3517 has 12 GP timers, they can be driven by the system clock 167 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 168 * This rate is divided by a local divisor. 169 */ 170 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 171 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 172 #define CONFIG_SYS_HZ 1000 173 174 /*----------------------------------------------------------------------- 175 * Physical Memory Map 176 */ 177 #define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ 178 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 179 #define CONFIG_SYS_CS0_SIZE (256 << 20) 180 181 /*----------------------------------------------------------------------- 182 * FLASH and environment organization 183 */ 184 185 /* **** PISMO SUPPORT *** */ 186 /* Monitor at start of flash */ 187 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 188 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 189 190 #define CONFIG_ENV_OFFSET 0x260000 191 #define CONFIG_ENV_ADDR 0x260000 192 193 #if defined(CONFIG_CMD_NET) 194 #define CONFIG_DRIVER_TI_EMAC 195 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 196 #define CONFIG_MII 197 #define CONFIG_ARP_TIMEOUT 200UL 198 #define CONFIG_NET_RETRY_COUNT 5 199 #endif /* CONFIG_CMD_NET */ 200 201 /* additions for new relocation code, must be added to all boards */ 202 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 203 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 204 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 205 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 206 CONFIG_SYS_INIT_RAM_SIZE - \ 207 GENERATED_GBL_DATA_SIZE) 208 209 /* Status LED */ 210 #define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ 211 212 /* Display Configuration */ 213 #define CONFIG_VIDEO_OMAP3 214 #define LCD_BPP LCD_COLOR16 215 216 #define CONFIG_SPLASH_SCREEN 217 #define CONFIG_SPLASHIMAGE_GUARD 218 #define CONFIG_BMP_16BPP 219 #define CONFIG_SCF0403_LCD 220 221 /* EEPROM */ 222 #define CONFIG_ENV_EEPROM_IS_ON_I2C 223 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 224 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 225 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 226 #define CONFIG_SYS_EEPROM_SIZE 256 227 228 #endif /* __CONFIG_H */ 229