1 /* 2 * (C) Copyright 2013 CompuLab, Ltd. 3 * Author: Igor Grinberg <grinberg@compulab.co.il> 4 * 5 * Configuration settings for the CompuLab CM-T3517 board 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* 14 * High Level Configuration Options 15 */ 16 #define CONFIG_OMAP /* in a TI OMAP core */ 17 #define CONFIG_CM_T3517 /* working with CM-T3517 */ 18 #define CONFIG_OMAP_COMMON 19 /* Common ARM Erratas */ 20 #define CONFIG_ARM_ERRATA_454179 21 #define CONFIG_ARM_ERRATA_430973 22 #define CONFIG_ARM_ERRATA_621766 23 24 #define CONFIG_SYS_TEXT_BASE 0x80008000 25 26 /* 27 * This is needed for the DMA stuff. 28 * Although the default iss 64, we still define it 29 * to be on the safe side once the default is changed. 30 */ 31 #define CONFIG_SYS_CACHELINE_SIZE 64 32 33 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 34 35 #include <asm/arch/cpu.h> /* get chip and board defs */ 36 #include <asm/arch/omap.h> 37 38 #define CONFIG_MACH_TYPE MACH_TYPE_CM_T3517 39 40 /* 41 * Display CPU and Board information 42 */ 43 #define CONFIG_DISPLAY_CPUINFO 44 #define CONFIG_DISPLAY_BOARDINFO 45 46 /* Clock Defines */ 47 #define V_OSCK 26000000 /* Clock output from T2 */ 48 #define V_SCLK (V_OSCK >> 1) 49 50 #define CONFIG_MISC_INIT_R 51 52 #define CONFIG_OF_LIBFDT 53 /* 54 * The early kernel mapping on ARM currently only maps from the base of DRAM 55 * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. 56 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, 57 * so that leaves DRAM base to DRAM base + 0x4000 available. 58 */ 59 #define CONFIG_SYS_BOOTMAPSZ 0x4000 60 61 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 62 #define CONFIG_SETUP_MEMORY_TAGS 63 #define CONFIG_INITRD_TAG 64 #define CONFIG_REVISION_TAG 65 #define CONFIG_SERIAL_TAG 66 67 /* 68 * Size of malloc() pool 69 */ 70 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 71 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 72 73 /* 74 * Hardware drivers 75 */ 76 77 /* 78 * NS16550 Configuration 79 */ 80 #define CONFIG_SYS_NS16550_SERIAL 81 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 82 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 83 84 /* 85 * select serial console configuration 86 */ 87 #define CONFIG_CONS_INDEX 3 88 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 89 #define CONFIG_SERIAL3 3 /* UART3 */ 90 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 91 92 /* allow to overwrite serial and ethaddr */ 93 #define CONFIG_ENV_OVERWRITE 94 #define CONFIG_BAUDRATE 115200 95 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 96 115200} 97 98 #define CONFIG_OMAP_GPIO 99 100 #define CONFIG_GENERIC_MMC 101 #define CONFIG_MMC 102 #define CONFIG_OMAP_HSMMC 103 #define CONFIG_DOS_PARTITION 104 105 /* USB */ 106 #define CONFIG_USB_MUSB_AM35X 107 108 #ifndef CONFIG_USB_MUSB_AM35X 109 #define CONFIG_USB_OMAP3 110 #define CONFIG_USB_EHCI 111 #define CONFIG_USB_EHCI_OMAP 112 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 113 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 114 #else /* !CONFIG_USB_MUSB_AM35X */ 115 #define CONFIG_USB_MUSB_HOST 116 #define CONFIG_USB_MUSB_PIO_ONLY 117 #endif /* CONFIG_USB_MUSB_AM35X */ 118 119 #define CONFIG_USB_STORAGE 120 #define CONFIG_CMD_USB 121 122 /* commands to include */ 123 #define CONFIG_CMD_CACHE 124 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 125 #define CONFIG_CMD_FAT /* FAT support */ 126 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 127 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 128 #define CONFIG_MTD_PARTITIONS 129 #define MTDIDS_DEFAULT "nand0=nand" 130 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 131 "1920k(u-boot),256k(u-boot-env),"\ 132 "4m(kernel),-(fs)" 133 134 #define CONFIG_CMD_I2C /* I2C serial bus support */ 135 #define CONFIG_CMD_MMC /* MMC support */ 136 #define CONFIG_CMD_NAND /* NAND support */ 137 #define CONFIG_CMD_DHCP 138 #define CONFIG_CMD_PING 139 140 141 #define CONFIG_SYS_NO_FLASH 142 #define CONFIG_SYS_I2C 143 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000 144 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 145 #define CONFIG_SYS_I2C_OMAP34XX 146 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 147 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 148 #define CONFIG_SYS_I2C_EEPROM_BUS 0 149 #define CONFIG_I2C_MULTI_BUS 150 151 /* 152 * Board NAND Info. 153 */ 154 #define CONFIG_NAND_OMAP_GPMC 155 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 156 /* to access nand */ 157 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 158 /* to access nand at */ 159 /* CS0 */ 160 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 161 /* devices */ 162 163 /* Environment information */ 164 #define CONFIG_BOOTDELAY 3 165 #define CONFIG_ZERO_BOOTDELAY_CHECK 166 167 #define CONFIG_EXTRA_ENV_SETTINGS \ 168 "loadaddr=0x82000000\0" \ 169 "baudrate=115200\0" \ 170 "console=ttyO2,115200n8\0" \ 171 "netretry=yes\0" \ 172 "mpurate=auto\0" \ 173 "vram=12M\0" \ 174 "dvimode=1024x768MR-16@60\0" \ 175 "defaultdisplay=dvi\0" \ 176 "mmcdev=0\0" \ 177 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ 178 "mmcrootfstype=ext4\0" \ 179 "nandroot=/dev/mtdblock4 rw\0" \ 180 "nandrootfstype=ubifs\0" \ 181 "mmcargs=setenv bootargs console=${console} " \ 182 "mpurate=${mpurate} " \ 183 "vram=${vram} " \ 184 "omapfb.mode=dvi:${dvimode} " \ 185 "omapdss.def_disp=${defaultdisplay} " \ 186 "root=${mmcroot} " \ 187 "rootfstype=${mmcrootfstype}\0" \ 188 "nandargs=setenv bootargs console=${console} " \ 189 "mpurate=${mpurate} " \ 190 "vram=${vram} " \ 191 "omapfb.mode=dvi:${dvimode} " \ 192 "omapdss.def_disp=${defaultdisplay} " \ 193 "root=${nandroot} " \ 194 "rootfstype=${nandrootfstype}\0" \ 195 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 196 "bootscript=echo Running bootscript from mmc ...; " \ 197 "source ${loadaddr}\0" \ 198 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 199 "mmcboot=echo Booting from mmc ...; " \ 200 "run mmcargs; " \ 201 "bootm ${loadaddr}\0" \ 202 "nandboot=echo Booting from nand ...; " \ 203 "run nandargs; " \ 204 "nand read ${loadaddr} 2a0000 400000; " \ 205 "bootm ${loadaddr}\0" \ 206 207 #define CONFIG_CMD_BOOTZ 208 #define CONFIG_BOOTCOMMAND \ 209 "mmc dev ${mmcdev}; if mmc rescan; then " \ 210 "if run loadbootscript; then " \ 211 "run bootscript; " \ 212 "else " \ 213 "if run loaduimage; then " \ 214 "run mmcboot; " \ 215 "else run nandboot; " \ 216 "fi; " \ 217 "fi; " \ 218 "else run nandboot; fi" 219 220 /* 221 * Miscellaneous configurable options 222 */ 223 #define CONFIG_AUTO_COMPLETE 224 #define CONFIG_CMDLINE_EDITING 225 #define CONFIG_TIMESTAMP 226 #define CONFIG_SYS_AUTOLOAD "no" 227 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 228 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 229 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 230 /* Print Buffer Size */ 231 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 232 sizeof(CONFIG_SYS_PROMPT) + 16) 233 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 234 /* Boot Argument Buffer Size */ 235 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 236 237 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) 238 239 /* 240 * AM3517 has 12 GP timers, they can be driven by the system clock 241 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 242 * This rate is divided by a local divisor. 243 */ 244 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 245 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 246 #define CONFIG_SYS_HZ 1000 247 248 /*----------------------------------------------------------------------- 249 * Physical Memory Map 250 */ 251 #define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ 252 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 253 #define CONFIG_SYS_CS0_SIZE (256 << 20) 254 255 /*----------------------------------------------------------------------- 256 * FLASH and environment organization 257 */ 258 259 /* **** PISMO SUPPORT *** */ 260 /* Monitor at start of flash */ 261 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 262 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 263 264 #define CONFIG_ENV_IS_IN_NAND 265 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 266 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 267 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 268 269 #if defined(CONFIG_CMD_NET) 270 #define CONFIG_DRIVER_TI_EMAC 271 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 272 #define CONFIG_MII 273 #define CONFIG_SMC911X 274 #define CONFIG_SMC911X_32_BIT 275 #define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) 276 #define CONFIG_ARP_TIMEOUT 200UL 277 #define CONFIG_NET_RETRY_COUNT 5 278 #endif /* CONFIG_CMD_NET */ 279 280 /* additions for new relocation code, must be added to all boards */ 281 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 282 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 283 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 284 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 285 CONFIG_SYS_INIT_RAM_SIZE - \ 286 GENERATED_GBL_DATA_SIZE) 287 288 /* Status LED */ 289 #define CONFIG_STATUS_LED /* Status LED enabled */ 290 #define CONFIG_BOARD_SPECIFIC_LED 291 #define CONFIG_GPIO_LED 292 #define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ 293 #define GREEN_LED_DEV 0 294 #define STATUS_LED_BIT GREEN_LED_GPIO 295 #define STATUS_LED_STATE STATUS_LED_ON 296 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 297 #define STATUS_LED_BOOT GREEN_LED_DEV 298 299 /* GPIO banks */ 300 #ifdef CONFIG_STATUS_LED 301 #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ 302 #endif 303 304 /* Display Configuration */ 305 #define CONFIG_OMAP3_GPIO_2 306 #define CONFIG_OMAP3_GPIO_5 307 #define CONFIG_VIDEO_OMAP3 308 #define LCD_BPP LCD_COLOR16 309 310 #define CONFIG_LCD 311 #define CONFIG_SPLASH_SCREEN 312 #define CONFIG_SPLASHIMAGE_GUARD 313 #define CONFIG_CMD_BMP 314 #define CONFIG_BMP_16BPP 315 #define CONFIG_SCF0403_LCD 316 317 #define CONFIG_OMAP3_SPI 318 319 #endif /* __CONFIG_H */ 320