1 /* 2 * (C) Copyright 2011 3 * CompuLab, Ltd. 4 * Mike Rapoport <mike@compulab.co.il> 5 * Igor Grinberg <grinberg@compulab.co.il> 6 * 7 * Based on omap3_beagle.h 8 * (C) Copyright 2006-2008 9 * Texas Instruments. 10 * Richard Woodruff <r-woodruff2@ti.com> 11 * Syed Mohammed Khasim <x0khasim@ti.com> 12 * 13 * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards 14 * 15 * See file CREDITS for list of people who contributed to this 16 * project. 17 * 18 * This program is free software; you can redistribute it and/or 19 * modify it under the terms of the GNU General Public License as 20 * published by the Free Software Foundation; either version 2 of 21 * the License, or (at your option) any later version. 22 * 23 * This program is distributed in the hope that it will be useful, 24 * but WITHOUT ANY WARRANTY; without even the implied warranty of 25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 26 * GNU General Public License for more details. 27 * 28 * You should have received a copy of the GNU General Public License 29 * along with this program; if not, write to the Free Software 30 * Foundation, Inc. 31 */ 32 33 #ifndef __CONFIG_H 34 #define __CONFIG_H 35 36 /* 37 * High Level Configuration Options 38 */ 39 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 40 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 41 #define CONFIG_CM_T3X 1 /* working with CM-T35 and CM-T3730 */ 42 43 #define CONFIG_SYS_TEXT_BASE 0x80008000 44 45 #define CONFIG_SDRC /* The chip has SDRC controller */ 46 47 #include <asm/arch/cpu.h> /* get chip and board defs */ 48 #include <asm/arch/omap3.h> 49 50 /* 51 * Display CPU and Board information 52 */ 53 #define CONFIG_DISPLAY_CPUINFO 1 54 #define CONFIG_DISPLAY_BOARDINFO 1 55 56 /* Clock Defines */ 57 #define V_OSCK 26000000 /* Clock output from T2 */ 58 #define V_SCLK (V_OSCK >> 1) 59 60 #undef CONFIG_USE_IRQ /* no support for IRQs */ 61 #define CONFIG_MISC_INIT_R 62 63 #define CONFIG_OF_LIBFDT 1 64 /* 65 * The early kernel mapping on ARM currently only maps from the base of DRAM 66 * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. 67 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, 68 * so that leaves DRAM base to DRAM base + 0x4000 available. 69 */ 70 #define CONFIG_SYS_BOOTMAPSZ 0x4000 71 72 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 73 #define CONFIG_SETUP_MEMORY_TAGS 1 74 #define CONFIG_INITRD_TAG 1 75 #define CONFIG_REVISION_TAG 1 76 77 /* 78 * Size of malloc() pool 79 */ 80 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 81 /* Sector */ 82 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 83 84 /* 85 * Hardware drivers 86 */ 87 88 /* 89 * NS16550 Configuration 90 */ 91 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 92 93 #define CONFIG_SYS_NS16550 94 #define CONFIG_SYS_NS16550_SERIAL 95 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 96 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 97 98 /* 99 * select serial console configuration 100 */ 101 #define CONFIG_CONS_INDEX 3 102 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 103 #define CONFIG_SERIAL3 3 /* UART3 */ 104 105 /* allow to overwrite serial and ethaddr */ 106 #define CONFIG_ENV_OVERWRITE 107 #define CONFIG_BAUDRATE 115200 108 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 109 115200} 110 #define CONFIG_GENERIC_MMC 1 111 #define CONFIG_MMC 1 112 #define CONFIG_OMAP_HSMMC 1 113 #define CONFIG_DOS_PARTITION 1 114 115 /* DDR - I use Micron DDR */ 116 #define CONFIG_OMAP3_MICRON_DDR 1 117 118 /* USB */ 119 #define CONFIG_MUSB_UDC 1 120 #define CONFIG_USB_OMAP3 1 121 #define CONFIG_TWL4030_USB 1 122 123 /* USB device configuration */ 124 #define CONFIG_USB_DEVICE 1 125 #define CONFIG_USB_TTY 1 126 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 127 128 /* commands to include */ 129 #include <config_cmd_default.h> 130 131 #define CONFIG_CMD_CACHE 132 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 133 #define CONFIG_CMD_FAT /* FAT support */ 134 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 135 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 136 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 137 #define MTDIDS_DEFAULT "nand0=nand" 138 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 139 "1920k(u-boot),128k(u-boot-env),"\ 140 "4m(kernel),-(fs)" 141 142 #define CONFIG_CMD_I2C /* I2C serial bus support */ 143 #define CONFIG_CMD_MMC /* MMC support */ 144 #define CONFIG_CMD_NAND /* NAND support */ 145 #define CONFIG_CMD_DHCP 146 #define CONFIG_CMD_PING 147 148 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 149 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 150 #undef CONFIG_CMD_IMLS /* List all found images */ 151 152 #define CONFIG_SYS_NO_FLASH 153 #define CONFIG_HARD_I2C 1 154 #define CONFIG_SYS_I2C_SPEED 100000 155 #define CONFIG_SYS_I2C_SLAVE 1 156 #define CONFIG_SYS_I2C_BUS 0 157 #define CONFIG_SYS_I2C_BUS_SELECT 1 158 #define CONFIG_DRIVER_OMAP34XX_I2C 1 159 160 /* 161 * TWL4030 162 */ 163 #define CONFIG_TWL4030_POWER 1 164 #define CONFIG_TWL4030_LED 1 165 166 /* 167 * Board NAND Info. 168 */ 169 #define CONFIG_SYS_NAND_QUIET_TEST 1 170 #define CONFIG_NAND_OMAP_GPMC 171 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 172 /* to access nand */ 173 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 174 /* to access nand at */ 175 /* CS0 */ 176 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 177 178 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 179 /* devices */ 180 #define CONFIG_JFFS2_NAND 181 /* nand device jffs2 lives on */ 182 #define CONFIG_JFFS2_DEV "nand0" 183 /* start of jffs2 partition */ 184 #define CONFIG_JFFS2_PART_OFFSET 0x680000 185 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 186 /* partition */ 187 188 /* Environment information */ 189 #define CONFIG_BOOTDELAY 10 190 191 #define CONFIG_EXTRA_ENV_SETTINGS \ 192 "loadaddr=0x82000000\0" \ 193 "usbtty=cdc_acm\0" \ 194 "console=ttyS2,115200n8\0" \ 195 "mpurate=500\0" \ 196 "vram=12M\0" \ 197 "dvimode=1024x768MR-16@60\0" \ 198 "defaultdisplay=dvi\0" \ 199 "mmcdev=0\0" \ 200 "mmcroot=/dev/mmcblk0p2 rw\0" \ 201 "mmcrootfstype=ext3 rootwait\0" \ 202 "nandroot=/dev/mtdblock4 rw\0" \ 203 "nandrootfstype=jffs2\0" \ 204 "mmcargs=setenv bootargs console=${console} " \ 205 "mpurate=${mpurate} " \ 206 "vram=${vram} " \ 207 "omapfb.mode=dvi:${dvimode} " \ 208 "omapfb.debug=y " \ 209 "omapdss.def_disp=${defaultdisplay} " \ 210 "root=${mmcroot} " \ 211 "rootfstype=${mmcrootfstype}\0" \ 212 "nandargs=setenv bootargs console=${console} " \ 213 "mpurate=${mpurate} " \ 214 "vram=${vram} " \ 215 "omapfb.mode=dvi:${dvimode} " \ 216 "omapfb.debug=y " \ 217 "omapdss.def_disp=${defaultdisplay} " \ 218 "root=${nandroot} " \ 219 "rootfstype=${nandrootfstype}\0" \ 220 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 221 "bootscript=echo Running bootscript from mmc ...; " \ 222 "source ${loadaddr}\0" \ 223 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 224 "mmcboot=echo Booting from mmc ...; " \ 225 "run mmcargs; " \ 226 "bootm ${loadaddr}\0" \ 227 "nandboot=echo Booting from nand ...; " \ 228 "run nandargs; " \ 229 "nand read ${loadaddr} 280000 400000; " \ 230 "bootm ${loadaddr}\0" \ 231 232 #define CONFIG_BOOTCOMMAND \ 233 "if mmc rescan ${mmcdev}; then " \ 234 "if run loadbootscript; then " \ 235 "run bootscript; " \ 236 "else " \ 237 "if run loaduimage; then " \ 238 "run mmcboot; " \ 239 "else run nandboot; " \ 240 "fi; " \ 241 "fi; " \ 242 "else run nandboot; fi" 243 244 /* 245 * Miscellaneous configurable options 246 */ 247 #define CONFIG_AUTO_COMPLETE 248 #define CONFIG_CMDLINE_EDITING 249 #define CONFIG_TIMESTAMP 250 #define CONFIG_SYS_AUTOLOAD "no" 251 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 252 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 253 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 254 #define CONFIG_SYS_PROMPT "CM-T3x # " 255 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 256 /* Print Buffer Size */ 257 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 258 sizeof(CONFIG_SYS_PROMPT) + 16) 259 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 260 /* Boot Argument Buffer Size */ 261 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 262 263 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ 264 /* works on */ 265 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 266 0x01F00000) /* 31MB */ 267 268 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 269 /* load address */ 270 271 /* 272 * OMAP3 has 12 GP timers, they can be driven by the system clock 273 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 274 * This rate is divided by a local divisor. 275 */ 276 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 277 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 278 #define CONFIG_SYS_HZ 1000 279 280 /*----------------------------------------------------------------------- 281 * Stack sizes 282 * 283 * The stack sizes are set up in start.S using the settings below 284 */ 285 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 286 287 /*----------------------------------------------------------------------- 288 * Physical Memory Map 289 */ 290 #define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */ 291 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 292 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 293 294 /*----------------------------------------------------------------------- 295 * FLASH and environment organization 296 */ 297 298 /* **** PISMO SUPPORT *** */ 299 300 /* Configure the PISMO */ 301 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 302 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 303 304 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 305 306 #if defined(CONFIG_CMD_NAND) 307 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 308 #endif 309 310 /* Monitor at start of flash */ 311 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 312 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 313 314 #define CONFIG_ENV_IS_IN_NAND 1 315 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 316 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 317 318 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 319 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 320 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 321 322 #if defined(CONFIG_CMD_NET) 323 #define CONFIG_SMC911X 324 #define CONFIG_SMC911X_32_BIT 325 #define CM_T3X_SMC911X_BASE 0x2C000000 326 #define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20)) 327 #define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE 328 #endif /* (CONFIG_CMD_NET) */ 329 330 /* additions for new relocation code, must be added to all boards */ 331 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 332 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 333 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 334 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 335 CONFIG_SYS_INIT_RAM_SIZE - \ 336 GENERATED_GBL_DATA_SIZE) 337 338 /* Status LED */ 339 #define CONFIG_STATUS_LED 1 /* Status LED enabled */ 340 #define CONFIG_BOARD_SPECIFIC_LED 1 341 #define STATUS_LED_GREEN 0 342 #define STATUS_LED_BIT STATUS_LED_GREEN 343 #define STATUS_LED_STATE STATUS_LED_ON 344 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 345 #define STATUS_LED_BOOT STATUS_LED_BIT 346 #define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ 347 348 /* GPIO banks */ 349 #ifdef CONFIG_STATUS_LED 350 #define CONFIG_OMAP3_GPIO_6 1 /* GPIO186 is in GPIO bank 6 */ 351 #endif 352 353 #endif /* __CONFIG_H */ 354