1 /* 2 * (C) Copyright 2011 3 * CompuLab, Ltd. 4 * Mike Rapoport <mike@compulab.co.il> 5 * Igor Grinberg <grinberg@compulab.co.il> 6 * 7 * Based on omap3_beagle.h 8 * (C) Copyright 2006-2008 9 * Texas Instruments. 10 * Richard Woodruff <r-woodruff2@ti.com> 11 * Syed Mohammed Khasim <x0khasim@ti.com> 12 * 13 * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards 14 * 15 * See file CREDITS for list of people who contributed to this 16 * project. 17 * 18 * This program is free software; you can redistribute it and/or 19 * modify it under the terms of the GNU General Public License as 20 * published by the Free Software Foundation; either version 2 of 21 * the License, or (at your option) any later version. 22 * 23 * This program is distributed in the hope that it will be useful, 24 * but WITHOUT ANY WARRANTY; without even the implied warranty of 25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 26 * GNU General Public License for more details. 27 * 28 * You should have received a copy of the GNU General Public License 29 * along with this program; if not, write to the Free Software 30 * Foundation, Inc. 31 */ 32 33 #ifndef __CONFIG_H 34 #define __CONFIG_H 35 36 /* 37 * High Level Configuration Options 38 */ 39 #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ 40 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 41 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 42 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 43 #define CONFIG_CM_T3X 1 /* working with CM-T35 and CM-T3730 */ 44 45 #define CONFIG_SYS_TEXT_BASE 0x80008000 46 47 #define CONFIG_SDRC /* The chip has SDRC controller */ 48 49 #include <asm/arch/cpu.h> /* get chip and board defs */ 50 #include <asm/arch/omap3.h> 51 52 /* 53 * Display CPU and Board information 54 */ 55 #define CONFIG_DISPLAY_CPUINFO 1 56 #define CONFIG_DISPLAY_BOARDINFO 1 57 58 /* Clock Defines */ 59 #define V_OSCK 26000000 /* Clock output from T2 */ 60 #define V_SCLK (V_OSCK >> 1) 61 62 #undef CONFIG_USE_IRQ /* no support for IRQs */ 63 #define CONFIG_MISC_INIT_R 64 65 #define CONFIG_OF_LIBFDT 1 66 /* 67 * The early kernel mapping on ARM currently only maps from the base of DRAM 68 * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. 69 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, 70 * so that leaves DRAM base to DRAM base + 0x4000 available. 71 */ 72 #define CONFIG_SYS_BOOTMAPSZ 0x4000 73 74 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 75 #define CONFIG_SETUP_MEMORY_TAGS 1 76 #define CONFIG_INITRD_TAG 1 77 #define CONFIG_REVISION_TAG 1 78 79 /* 80 * Size of malloc() pool 81 */ 82 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 83 /* Sector */ 84 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 85 /* initial data */ 86 87 /* 88 * Hardware drivers 89 */ 90 91 /* 92 * NS16550 Configuration 93 */ 94 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 95 96 #define CONFIG_SYS_NS16550 97 #define CONFIG_SYS_NS16550_SERIAL 98 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 99 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 100 101 /* 102 * select serial console configuration 103 */ 104 #define CONFIG_CONS_INDEX 3 105 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 106 #define CONFIG_SERIAL3 3 /* UART3 */ 107 108 /* allow to overwrite serial and ethaddr */ 109 #define CONFIG_ENV_OVERWRITE 110 #define CONFIG_BAUDRATE 115200 111 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 112 115200} 113 #define CONFIG_MMC 1 114 #define CONFIG_OMAP3_MMC 1 115 #define CONFIG_DOS_PARTITION 1 116 117 /* DDR - I use Micron DDR */ 118 #define CONFIG_OMAP3_MICRON_DDR 1 119 120 /* USB */ 121 #define CONFIG_MUSB_UDC 1 122 #define CONFIG_USB_OMAP3 1 123 #define CONFIG_TWL4030_USB 1 124 125 /* USB device configuration */ 126 #define CONFIG_USB_DEVICE 1 127 #define CONFIG_USB_TTY 1 128 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 129 130 /* commands to include */ 131 #include <config_cmd_default.h> 132 133 #define CONFIG_CMD_CACHE 134 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 135 #define CONFIG_CMD_FAT /* FAT support */ 136 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 137 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 138 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 139 #define MTDIDS_DEFAULT "nand0=nand" 140 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 141 "1920k(u-boot),128k(u-boot-env),"\ 142 "4m(kernel),-(fs)" 143 144 #define CONFIG_CMD_I2C /* I2C serial bus support */ 145 #define CONFIG_CMD_MMC /* MMC support */ 146 #define CONFIG_CMD_NAND /* NAND support */ 147 #define CONFIG_CMD_DHCP 148 #define CONFIG_CMD_PING 149 150 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 151 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 152 #undef CONFIG_CMD_IMLS /* List all found images */ 153 154 #define CONFIG_SYS_NO_FLASH 155 #define CONFIG_HARD_I2C 1 156 #define CONFIG_SYS_I2C_SPEED 100000 157 #define CONFIG_SYS_I2C_SLAVE 1 158 #define CONFIG_SYS_I2C_BUS 0 159 #define CONFIG_SYS_I2C_BUS_SELECT 1 160 #define CONFIG_DRIVER_OMAP34XX_I2C 1 161 162 /* 163 * TWL4030 164 */ 165 #define CONFIG_TWL4030_POWER 1 166 #define CONFIG_TWL4030_LED 1 167 168 /* 169 * Board NAND Info. 170 */ 171 #define CONFIG_SYS_NAND_QUIET_TEST 1 172 #define CONFIG_NAND_OMAP_GPMC 173 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 174 /* to access nand */ 175 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 176 /* to access nand at */ 177 /* CS0 */ 178 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 179 180 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 181 /* devices */ 182 #define CONFIG_JFFS2_NAND 183 /* nand device jffs2 lives on */ 184 #define CONFIG_JFFS2_DEV "nand0" 185 /* start of jffs2 partition */ 186 #define CONFIG_JFFS2_PART_OFFSET 0x680000 187 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 188 /* partition */ 189 190 /* Environment information */ 191 #define CONFIG_BOOTDELAY 10 192 193 #define CONFIG_EXTRA_ENV_SETTINGS \ 194 "loadaddr=0x82000000\0" \ 195 "usbtty=cdc_acm\0" \ 196 "console=ttyS2,115200n8\0" \ 197 "mpurate=500\0" \ 198 "vram=12M\0" \ 199 "dvimode=1024x768MR-16@60\0" \ 200 "defaultdisplay=dvi\0" \ 201 "mmcdev=0\0" \ 202 "mmcroot=/dev/mmcblk0p2 rw\0" \ 203 "mmcrootfstype=ext3 rootwait\0" \ 204 "nandroot=/dev/mtdblock4 rw\0" \ 205 "nandrootfstype=jffs2\0" \ 206 "mmcargs=setenv bootargs console=${console} " \ 207 "mpurate=${mpurate} " \ 208 "vram=${vram} " \ 209 "omapfb.mode=dvi:${dvimode} " \ 210 "omapfb.debug=y " \ 211 "omapdss.def_disp=${defaultdisplay} " \ 212 "root=${mmcroot} " \ 213 "rootfstype=${mmcrootfstype}\0" \ 214 "nandargs=setenv bootargs console=${console} " \ 215 "mpurate=${mpurate} " \ 216 "vram=${vram} " \ 217 "omapfb.mode=dvi:${dvimode} " \ 218 "omapfb.debug=y " \ 219 "omapdss.def_disp=${defaultdisplay} " \ 220 "root=${nandroot} " \ 221 "rootfstype=${nandrootfstype}\0" \ 222 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 223 "bootscript=echo Running bootscript from mmc ...; " \ 224 "source ${loadaddr}\0" \ 225 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 226 "mmcboot=echo Booting from mmc ...; " \ 227 "run mmcargs; " \ 228 "bootm ${loadaddr}\0" \ 229 "nandboot=echo Booting from nand ...; " \ 230 "run nandargs; " \ 231 "nand read ${loadaddr} 280000 400000; " \ 232 "bootm ${loadaddr}\0" \ 233 234 #define CONFIG_BOOTCOMMAND \ 235 "if mmc rescan ${mmcdev}; then " \ 236 "if run loadbootscript; then " \ 237 "run bootscript; " \ 238 "else " \ 239 "if run loaduimage; then " \ 240 "run mmcboot; " \ 241 "else run nandboot; " \ 242 "fi; " \ 243 "fi; " \ 244 "else run nandboot; fi" 245 246 /* 247 * Miscellaneous configurable options 248 */ 249 #define CONFIG_AUTO_COMPLETE 250 #define CONFIG_CMDLINE_EDITING 251 #define CONFIG_TIMESTAMP 252 #define CONFIG_SYS_AUTOLOAD "no" 253 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 254 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 255 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 256 #define CONFIG_SYS_PROMPT "CM-T3x # " 257 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 258 /* Print Buffer Size */ 259 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 260 sizeof(CONFIG_SYS_PROMPT) + 16) 261 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 262 /* Boot Argument Buffer Size */ 263 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 264 265 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ 266 /* works on */ 267 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 268 0x01F00000) /* 31MB */ 269 270 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 271 /* load address */ 272 273 /* 274 * OMAP3 has 12 GP timers, they can be driven by the system clock 275 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 276 * This rate is divided by a local divisor. 277 */ 278 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 279 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 280 #define CONFIG_SYS_HZ 1000 281 282 /*----------------------------------------------------------------------- 283 * Stack sizes 284 * 285 * The stack sizes are set up in start.S using the settings below 286 */ 287 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 288 #ifdef CONFIG_USE_IRQ 289 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 290 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 291 #endif 292 293 /*----------------------------------------------------------------------- 294 * Physical Memory Map 295 */ 296 #define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */ 297 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 298 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 299 300 /* SDRAM Bank Allocation method */ 301 #define SDRC_R_B_C 1 302 303 /*----------------------------------------------------------------------- 304 * FLASH and environment organization 305 */ 306 307 /* **** PISMO SUPPORT *** */ 308 309 /* Configure the PISMO */ 310 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 311 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 312 313 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 314 315 #if defined(CONFIG_CMD_NAND) 316 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 317 #endif 318 319 /* Monitor at start of flash */ 320 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 321 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 322 323 #define CONFIG_ENV_IS_IN_NAND 1 324 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 325 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 326 327 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 328 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 329 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 330 331 #if defined(CONFIG_CMD_NET) 332 #define CONFIG_NET_MULTI 333 #define CONFIG_SMC911X 334 #define CONFIG_SMC911X_32_BIT 335 #define CM_T3X_SMC911X_BASE 0x2C000000 336 #define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20)) 337 #define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE 338 #endif /* (CONFIG_CMD_NET) */ 339 340 /* additions for new relocation code, must be added to all boards */ 341 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 342 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 343 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 344 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 345 CONFIG_SYS_INIT_RAM_SIZE - \ 346 GENERATED_GBL_DATA_SIZE) 347 348 /* Status LED */ 349 #define CONFIG_STATUS_LED 1 /* Status LED enabled */ 350 #define CONFIG_BOARD_SPECIFIC_LED 1 351 #define STATUS_LED_GREEN 0 352 #define STATUS_LED_BIT STATUS_LED_GREEN 353 #define STATUS_LED_STATE STATUS_LED_ON 354 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 355 #define STATUS_LED_BOOT STATUS_LED_BIT 356 #define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ 357 358 /* GPIO banks */ 359 #ifdef CONFIG_STATUS_LED 360 #define CONFIG_OMAP3_GPIO_6 1 /* GPIO186 is in GPIO bank 6 */ 361 #endif 362 363 #endif /* __CONFIG_H */ 364