1 /* 2 * Config file for Compulab CM-FX6 board 3 * 4 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ 5 * 6 * Author: Nikita Kiryanov <nikita@compulab.co.il> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_CM_FX6_H 12 #define __CONFIG_CM_FX6_H 13 14 #include <asm/arch/imx-regs.h> 15 #include <config_distro_defaults.h> 16 #include "mx6_common.h" 17 18 /* Machine config */ 19 #define CONFIG_MX6 20 #define CONFIG_SYS_LITTLE_ENDIAN 21 #define CONFIG_MACH_TYPE 4273 22 23 #ifndef CONFIG_SPL_BUILD 24 #define CONFIG_DM 25 #define CONFIG_CMD_DM 26 27 #define CONFIG_DM_GPIO 28 #define CONFIG_CMD_GPIO 29 30 #define CONFIG_DM_SERIAL 31 #define CONFIG_SYS_MALLOC_F_LEN (1 << 10) 32 #endif 33 34 /* Display information on boot */ 35 #define CONFIG_DISPLAY_CPUINFO 36 #define CONFIG_DISPLAY_BOARDINFO 37 #define CONFIG_TIMESTAMP 38 39 /* CMD */ 40 #include <config_cmd_default.h> 41 #define CONFIG_CMD_GREPENV 42 #undef CONFIG_CMD_FLASH 43 #undef CONFIG_CMD_LOADB 44 #undef CONFIG_CMD_LOADS 45 #undef CONFIG_CMD_XIMG 46 #undef CONFIG_CMD_FPGA 47 #undef CONFIG_CMD_IMLS 48 49 /* MMC */ 50 #define CONFIG_MMC 51 #define CONFIG_CMD_MMC 52 #define CONFIG_GENERIC_MMC 53 #define CONFIG_FSL_ESDHC 54 #define CONFIG_FSL_USDHC 55 #define CONFIG_SYS_FSL_USDHC_NUM 3 56 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 57 58 /* RAM */ 59 #define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR 60 #define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR 61 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 62 #define CONFIG_NR_DRAM_BANKS 2 63 #define CONFIG_SYS_MEMTEST_START 0x10000000 64 #define CONFIG_SYS_MEMTEST_END 0x10010000 65 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 66 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 67 #define CONFIG_SYS_INIT_SP_OFFSET \ 68 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 69 #define CONFIG_SYS_INIT_SP_ADDR \ 70 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 71 72 /* Serial console */ 73 #define CONFIG_MXC_UART 74 #define CONFIG_MXC_UART_BASE UART4_BASE 75 #define CONFIG_BAUDRATE 115200 76 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} 77 78 /* Shell */ 79 #define CONFIG_SYS_PROMPT "CM-FX6 # " 80 #define CONFIG_SYS_CBSIZE 1024 81 #define CONFIG_SYS_MAXARGS 16 82 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 83 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 84 sizeof(CONFIG_SYS_PROMPT) + 16) 85 86 /* SPI flash */ 87 #define CONFIG_SYS_NO_FLASH 88 #define CONFIG_CMD_SF 89 #define CONFIG_SF_DEFAULT_BUS 0 90 #define CONFIG_SF_DEFAULT_CS 0 91 #define CONFIG_SF_DEFAULT_SPEED 25000000 92 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) 93 94 /* Environment */ 95 #define CONFIG_ENV_OVERWRITE 96 #define CONFIG_ENV_IS_IN_SPI_FLASH 97 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 98 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 99 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 100 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 101 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 102 #define CONFIG_ENV_SIZE (8 * 1024) 103 #define CONFIG_ENV_OFFSET (768 * 1024) 104 105 #define CONFIG_EXTRA_ENV_SETTINGS \ 106 "stdin=serial,usbkbd\0" \ 107 "stdout=serial,vga\0" \ 108 "stderr=serial,vga\0" \ 109 "panel=HDMI\0" \ 110 "autoload=no\0" \ 111 "kernel=uImage-cm-fx6\0" \ 112 "script=boot.scr\0" \ 113 "dtb=cm-fx6.dtb\0" \ 114 "bootm_low=18000000\0" \ 115 "loadaddr=0x10800000\0" \ 116 "fdtaddr=0x11000000\0" \ 117 "console=ttymxc3,115200\0" \ 118 "ethprime=FEC0\0" \ 119 "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \ 120 "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \ 121 "doboot=bootm ${loadaddr}\0" \ 122 "doloadfdt=false\0" \ 123 "setboottypez=setenv kernel zImage-cm-fx6;" \ 124 "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \ 125 "setenv doloadfdt true;\0" \ 126 "setboottypem=setenv kernel uImage-cm-fx6;" \ 127 "setenv doboot bootm ${loadaddr};" \ 128 "setenv doloadfdt false;\0"\ 129 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ 130 "sataroot=/dev/sda2 rw rootwait\0" \ 131 "nandroot=/dev/mtdblock4 rw\0" \ 132 "nandrootfstype=ubifs\0" \ 133 "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \ 134 "${video}\0" \ 135 "sataargs=setenv bootargs console=${console} root=${sataroot} " \ 136 "${video}\0" \ 137 "nandargs=setenv bootargs console=${console} " \ 138 "root=${nandroot} " \ 139 "rootfstype=${nandrootfstype} " \ 140 "${video}\0" \ 141 "nandboot=if run nandloadkernel; then " \ 142 "run nandloadfdt;" \ 143 "run setboottypem;" \ 144 "run storagebootcmd;" \ 145 "run setboottypez;" \ 146 "run storagebootcmd;" \ 147 "fi;\0" \ 148 "run_eboot=echo Starting EBOOT ...; "\ 149 "mmc dev 2 && " \ 150 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ 151 "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\ 152 "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\ 153 "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \ 154 "bootscript=echo Running bootscript from ${storagetype} ...;" \ 155 "source ${loadaddr};\0" \ 156 "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \ 157 "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \ 158 "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \ 159 "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \ 160 "setupnandboot=setenv storagetype nand;\0" \ 161 "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \ 162 "storagebootcmd=echo Booting from ${storagetype} ...;" \ 163 "run ${storagetype}args; run doboot;\0" \ 164 "trybootk=if run loadkernel; then " \ 165 "if ${doloadfdt}; then " \ 166 "run loadfdt;" \ 167 "fi;" \ 168 "run storagebootcmd;" \ 169 "fi;\0" \ 170 "trybootsmz=if run loadscript; then " \ 171 "run bootscript;" \ 172 "fi;" \ 173 "run setboottypem;" \ 174 "run trybootk;" \ 175 "run setboottypez;" \ 176 "run trybootk;\0" 177 178 #define CONFIG_BOOTCOMMAND \ 179 "run setupmmcboot;" \ 180 "mmc dev ${storagedev};" \ 181 "if mmc rescan; then " \ 182 "run trybootsmz;" \ 183 "fi;" \ 184 "run setupusbboot;" \ 185 "if usb start; then "\ 186 "if run loadscript; then " \ 187 "run bootscript;" \ 188 "fi;" \ 189 "fi;" \ 190 "run setupsataboot;" \ 191 "if sata init; then " \ 192 "run trybootsmz;" \ 193 "fi;" \ 194 "run setupnandboot;" \ 195 "run nandboot;" 196 197 #define CONFIG_PREBOOT "usb start" 198 199 /* SPI */ 200 #define CONFIG_SPI 201 #define CONFIG_MXC_SPI 202 #define CONFIG_SPI_FLASH 203 #define CONFIG_SPI_FLASH_ATMEL 204 #define CONFIG_SPI_FLASH_EON 205 #define CONFIG_SPI_FLASH_GIGADEVICE 206 #define CONFIG_SPI_FLASH_MACRONIX 207 #define CONFIG_SPI_FLASH_SPANSION 208 #define CONFIG_SPI_FLASH_STMICRO 209 #define CONFIG_SPI_FLASH_SST 210 #define CONFIG_SPI_FLASH_WINBOND 211 212 /* NAND */ 213 #ifndef CONFIG_SPL_BUILD 214 #define CONFIG_CMD_NAND 215 #define CONFIG_SYS_NAND_BASE 0x40000000 216 #define CONFIG_SYS_NAND_MAX_CHIPS 1 217 #define CONFIG_SYS_MAX_NAND_DEVICE 1 218 #define CONFIG_NAND_MXS 219 #define CONFIG_SYS_NAND_ONFI_DETECTION 220 /* APBH DMA is required for NAND support */ 221 #define CONFIG_APBH_DMA 222 #define CONFIG_APBH_DMA_BURST 223 #define CONFIG_APBH_DMA_BURST8 224 #endif 225 226 /* Ethernet */ 227 #define CONFIG_FEC_MXC 228 #define CONFIG_FEC_MXC_PHYADDR 0 229 #define CONFIG_FEC_XCV_TYPE RGMII 230 #define IMX_FEC_BASE ENET_BASE_ADDR 231 #define CONFIG_PHYLIB 232 #define CONFIG_PHY_ATHEROS 233 #define CONFIG_MII 234 #define CONFIG_ETHPRIME "FEC0" 235 #define CONFIG_ARP_TIMEOUT 200UL 236 #define CONFIG_NET_RETRY_COUNT 5 237 238 /* USB */ 239 #define CONFIG_CMD_USB 240 #define CONFIG_USB_EHCI 241 #define CONFIG_USB_EHCI_MX6 242 #define CONFIG_USB_STORAGE 243 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 244 #define CONFIG_MXC_USB_FLAGS 0 245 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 246 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 247 #define CONFIG_USB_KEYBOARD 248 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 249 #define CONFIG_SYS_STDIO_DEREGISTER 250 251 /* I2C */ 252 #define CONFIG_CMD_I2C 253 #define CONFIG_SYS_I2C 254 #define CONFIG_SYS_I2C_MXC 255 #define CONFIG_SYS_I2C_SPEED 100000 256 #define CONFIG_SYS_MXC_I2C3_SPEED 400000 257 258 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 259 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 260 #define CONFIG_SYS_I2C_EEPROM_BUS 2 261 262 /* SATA */ 263 #define CONFIG_CMD_SATA 264 #define CONFIG_SYS_SATA_MAX_DEVICE 1 265 #define CONFIG_LIBATA 266 #define CONFIG_LBA48 267 #define CONFIG_DWC_AHSATA 268 #define CONFIG_DWC_AHSATA_PORT_ID 0 269 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 270 271 /* GPIO */ 272 #define CONFIG_MXC_GPIO 273 274 /* Boot */ 275 #define CONFIG_ZERO_BOOTDELAY_CHECK 276 #define CONFIG_LOADADDR 0x10800000 277 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 278 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 279 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) 280 #define CONFIG_SETUP_MEMORY_TAGS 281 #define CONFIG_INITRD_TAG 282 #define CONFIG_REVISION_TAG 283 #define CONFIG_SERIAL_TAG 284 285 /* misc */ 286 #define CONFIG_SYS_GENERIC_BOARD 287 #define CONFIG_STACKSIZE (128 * 1024) 288 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 289 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ 290 #define CONFIG_OF_BOARD_SETUP 291 292 /* SPL */ 293 #include "imx6_spl.h" 294 #define CONFIG_SPL_BOARD_INIT 295 #define CONFIG_SPL_MMC_SUPPORT 296 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */ 297 #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024) 298 #define CONFIG_SPL_SPI_SUPPORT 299 #define CONFIG_SPL_SPI_FLASH_SUPPORT 300 #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) 301 #define CONFIG_SPL_SPI_LOAD 302 303 /* Display */ 304 #define CONFIG_VIDEO 305 #define CONFIG_VIDEO_IPUV3 306 #define CONFIG_IPUV3_CLK 260000000 307 #define CONFIG_IMX_HDMI 308 #define CONFIG_IMX_VIDEO_SKIP 309 #define CONFIG_CFB_CONSOLE 310 #define CONFIG_VGA_AS_SINGLE_DEVICE 311 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 312 #define CONFIG_CONSOLE_MUX 313 #define CONFIG_VIDEO_SW_CURSOR 314 315 #define CONFIG_SPLASH_SCREEN 316 #define CONFIG_SPLASH_SOURCE 317 #define CONFIG_CMD_BMP 318 #define CONFIG_VIDEO_BMP_RLE8 319 320 #define CONFIG_VIDEO_LOGO 321 #define CONFIG_VIDEO_BMP_LOGO 322 323 #endif /* __CONFIG_CM_FX6_H */ 324