1 /* 2 * Config file for Compulab CM-FX6 board 3 * 4 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ 5 * 6 * Author: Nikita Kiryanov <nikita@compulab.co.il> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_CM_FX6_H 12 #define __CONFIG_CM_FX6_H 13 14 #include "mx6_common.h" 15 16 /* Machine config */ 17 #define CONFIG_SYS_LITTLE_ENDIAN 18 #define CONFIG_MACH_TYPE 4273 19 20 /* CMD */ 21 #define CONFIG_CMD_GREPENV 22 23 /* MMC */ 24 #define CONFIG_SYS_FSL_USDHC_NUM 3 25 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 26 27 /* RAM */ 28 #define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR 29 #define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR 30 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 31 #define CONFIG_NR_DRAM_BANKS 2 32 #define CONFIG_SYS_MEMTEST_START 0x10000000 33 #define CONFIG_SYS_MEMTEST_END 0x10010000 34 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 35 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 36 #define CONFIG_SYS_INIT_SP_OFFSET \ 37 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 38 #define CONFIG_SYS_INIT_SP_ADDR \ 39 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 40 41 /* Serial console */ 42 #define CONFIG_MXC_UART 43 #define CONFIG_MXC_UART_BASE UART4_BASE 44 #define CONFIG_BAUDRATE 115200 45 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} 46 47 /* Shell */ 48 #define CONFIG_SYS_PROMPT "CM-FX6 # " 49 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 50 sizeof(CONFIG_SYS_PROMPT) + 16) 51 52 /* SPI flash */ 53 #define CONFIG_SF_DEFAULT_BUS 0 54 #define CONFIG_SF_DEFAULT_CS 0 55 #define CONFIG_SF_DEFAULT_SPEED 25000000 56 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) 57 58 /* Environment */ 59 #define CONFIG_ENV_IS_IN_SPI_FLASH 60 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 61 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 62 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 63 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 64 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 65 #define CONFIG_ENV_SIZE (8 * 1024) 66 #define CONFIG_ENV_OFFSET (768 * 1024) 67 68 #define CONFIG_EXTRA_ENV_SETTINGS \ 69 "stdin=serial,usbkbd\0" \ 70 "stdout=serial,vga\0" \ 71 "stderr=serial,vga\0" \ 72 "panel=HDMI\0" \ 73 "autoload=no\0" \ 74 "kernel=uImage-cm-fx6\0" \ 75 "script=boot.scr\0" \ 76 "dtb=cm-fx6.dtb\0" \ 77 "bootm_low=18000000\0" \ 78 "loadaddr=0x10800000\0" \ 79 "fdtaddr=0x11000000\0" \ 80 "console=ttymxc3,115200\0" \ 81 "ethprime=FEC0\0" \ 82 "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \ 83 "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \ 84 "doboot=bootm ${loadaddr}\0" \ 85 "doloadfdt=false\0" \ 86 "setboottypez=setenv kernel zImage-cm-fx6;" \ 87 "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \ 88 "setenv doloadfdt true;\0" \ 89 "setboottypem=setenv kernel uImage-cm-fx6;" \ 90 "setenv doboot bootm ${loadaddr};" \ 91 "setenv doloadfdt false;\0"\ 92 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ 93 "sataroot=/dev/sda2 rw rootwait\0" \ 94 "nandroot=/dev/mtdblock4 rw\0" \ 95 "nandrootfstype=ubifs\0" \ 96 "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \ 97 "${video}\0" \ 98 "sataargs=setenv bootargs console=${console} root=${sataroot} " \ 99 "${video}\0" \ 100 "nandargs=setenv bootargs console=${console} " \ 101 "root=${nandroot} " \ 102 "rootfstype=${nandrootfstype} " \ 103 "${video}\0" \ 104 "nandboot=if run nandloadkernel; then " \ 105 "run nandloadfdt;" \ 106 "run setboottypem;" \ 107 "run storagebootcmd;" \ 108 "run setboottypez;" \ 109 "run storagebootcmd;" \ 110 "fi;\0" \ 111 "run_eboot=echo Starting EBOOT ...; "\ 112 "mmc dev 2 && " \ 113 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ 114 "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\ 115 "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\ 116 "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \ 117 "bootscript=echo Running bootscript from ${storagetype} ...;" \ 118 "source ${loadaddr};\0" \ 119 "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \ 120 "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \ 121 "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \ 122 "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \ 123 "setupnandboot=setenv storagetype nand;\0" \ 124 "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \ 125 "storagebootcmd=echo Booting from ${storagetype} ...;" \ 126 "run ${storagetype}args; run doboot;\0" \ 127 "trybootk=if run loadkernel; then " \ 128 "if ${doloadfdt}; then " \ 129 "run loadfdt;" \ 130 "fi;" \ 131 "run storagebootcmd;" \ 132 "fi;\0" \ 133 "trybootsmz=if run loadscript; then " \ 134 "run bootscript;" \ 135 "fi;" \ 136 "run setboottypem;" \ 137 "run trybootk;" \ 138 "run setboottypez;" \ 139 "run trybootk;\0" 140 141 #define CONFIG_BOOTCOMMAND \ 142 "run setupmmcboot;" \ 143 "mmc dev ${storagedev};" \ 144 "if mmc rescan; then " \ 145 "run trybootsmz;" \ 146 "fi;" \ 147 "run setupusbboot;" \ 148 "if usb start; then "\ 149 "if run loadscript; then " \ 150 "run bootscript;" \ 151 "fi;" \ 152 "fi;" \ 153 "run setupsataboot;" \ 154 "if sata init; then " \ 155 "run trybootsmz;" \ 156 "fi;" \ 157 "run setupnandboot;" \ 158 "run nandboot;" 159 160 #define CONFIG_PREBOOT "usb start" 161 162 /* SPI */ 163 #define CONFIG_SPI 164 #define CONFIG_MXC_SPI 165 166 /* NAND */ 167 #ifndef CONFIG_SPL_BUILD 168 #define CONFIG_CMD_NAND 169 #define CONFIG_SYS_NAND_BASE 0x40000000 170 #define CONFIG_SYS_NAND_MAX_CHIPS 1 171 #define CONFIG_SYS_MAX_NAND_DEVICE 1 172 #define CONFIG_NAND_MXS 173 #define CONFIG_SYS_NAND_ONFI_DETECTION 174 /* APBH DMA is required for NAND support */ 175 #define CONFIG_APBH_DMA 176 #define CONFIG_APBH_DMA_BURST 177 #define CONFIG_APBH_DMA_BURST8 178 #endif 179 180 /* Ethernet */ 181 #define CONFIG_FEC_MXC 182 #define CONFIG_FEC_MXC_PHYADDR 0 183 #define CONFIG_FEC_XCV_TYPE RGMII 184 #define IMX_FEC_BASE ENET_BASE_ADDR 185 #define CONFIG_PHYLIB 186 #define CONFIG_PHY_ATHEROS 187 #define CONFIG_MII 188 #define CONFIG_ETHPRIME "FEC0" 189 #define CONFIG_ARP_TIMEOUT 200UL 190 #define CONFIG_NET_RETRY_COUNT 5 191 192 /* USB */ 193 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 194 #define CONFIG_MXC_USB_FLAGS 0 195 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 196 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 197 #define CONFIG_SYS_STDIO_DEREGISTER 198 199 /* I2C */ 200 #define CONFIG_SYS_I2C 201 #define CONFIG_SYS_I2C_MXC 202 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 203 #define CONFIG_SYS_I2C_SPEED 100000 204 #define CONFIG_SYS_MXC_I2C3_SPEED 400000 205 206 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 207 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 208 #define CONFIG_SYS_I2C_EEPROM_BUS 2 209 210 /* SATA */ 211 #define CONFIG_CMD_SATA 212 #define CONFIG_SYS_SATA_MAX_DEVICE 1 213 #define CONFIG_LIBATA 214 #define CONFIG_LBA48 215 #define CONFIG_DWC_AHSATA 216 #define CONFIG_DWC_AHSATA_PORT_ID 0 217 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 218 219 /* Boot */ 220 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) 221 #define CONFIG_SERIAL_TAG 222 223 /* misc */ 224 #define CONFIG_STACKSIZE (128 * 1024) 225 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 226 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ 227 #define CONFIG_OF_BOARD_SETUP 228 229 /* SPL */ 230 #include "imx6_spl.h" 231 #define CONFIG_SPL_BOARD_INIT 232 #define CONFIG_SPL_MMC_SUPPORT 233 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */ 234 #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024) 235 #define CONFIG_SPL_SPI_SUPPORT 236 #define CONFIG_SPL_SPI_FLASH_SUPPORT 237 #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) 238 #define CONFIG_SPL_SPI_LOAD 239 240 /* Display */ 241 #define CONFIG_VIDEO 242 #define CONFIG_VIDEO_IPUV3 243 #define CONFIG_IPUV3_CLK 260000000 244 #define CONFIG_IMX_HDMI 245 #define CONFIG_CFB_CONSOLE 246 #define CONFIG_VGA_AS_SINGLE_DEVICE 247 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 248 #define CONFIG_CONSOLE_MUX 249 #define CONFIG_VIDEO_SW_CURSOR 250 251 #define CONFIG_SPLASH_SCREEN 252 #define CONFIG_SPLASH_SOURCE 253 #define CONFIG_CMD_BMP 254 #define CONFIG_VIDEO_BMP_RLE8 255 256 #define CONFIG_VIDEO_LOGO 257 #define CONFIG_VIDEO_BMP_LOGO 258 259 #endif /* __CONFIG_CM_FX6_H */ 260