1 /* 2 * Copyright (C) 2015 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_CLEARFOG_H 8 #define _CONFIG_CLEARFOG_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 14 #define CONFIG_DISPLAY_BOARDINFO_LATE 15 16 /* 17 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 18 * for DDR ECC byte filling in the SPL before loading the main 19 * U-Boot into it. 20 */ 21 #define CONFIG_SYS_TEXT_BASE 0x00800000 22 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 23 24 /* 25 * Commands configuration 26 */ 27 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 28 #define CONFIG_CMD_ENV 29 #define CONFIG_CMD_PCI 30 31 /* I2C */ 32 #define CONFIG_SYS_I2C 33 #define CONFIG_SYS_I2C_MVTWSI 34 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 35 #define CONFIG_SYS_I2C_SLAVE 0x0 36 #define CONFIG_SYS_I2C_SPEED 100000 37 38 /* SPI NOR flash default params, used by sf commands */ 39 #define CONFIG_SF_DEFAULT_SPEED 1000000 40 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 41 #define CONFIG_SPI_FLASH_STMICRO 42 43 /* 44 * SDIO/MMC Card Configuration 45 */ 46 #define CONFIG_MMC 47 #define CONFIG_MMC_SDMA 48 #define CONFIG_GENERIC_MMC 49 #define CONFIG_SDHCI 50 #define CONFIG_MV_SDHCI 51 #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE 52 53 /* Partition support */ 54 #define CONFIG_DOS_PARTITION 55 #define CONFIG_EFI_PARTITION 56 57 /* Additional FS support/configuration */ 58 #define CONFIG_SUPPORT_VFAT 59 60 /* USB/EHCI configuration */ 61 #define CONFIG_EHCI_IS_TDI 62 63 #define CONFIG_ENV_MIN_ENTRIES 128 64 65 /* Environment in MMC */ 66 #define CONFIG_ENV_IS_IN_MMC 67 #define CONFIG_SYS_MMC_ENV_DEV 0 68 #define CONFIG_ENV_SECT_SIZE 0x200 69 #define CONFIG_ENV_SIZE 0x10000 70 /* 71 * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC 72 * boot image starts @ LBA-0. 73 * As result in MMC/eMMC case it will be a 1 sector gap between u-boot 74 * image and environment 75 */ 76 #define CONFIG_ENV_OFFSET 0xf0000 77 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET 78 79 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 80 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 81 82 /* PCIe support */ 83 #ifndef CONFIG_SPL_BUILD 84 #define CONFIG_PCI_MVEBU 85 #define CONFIG_PCI_SCAN_SHOW 86 #endif 87 88 #define CONFIG_SYS_ALT_MEMTEST 89 90 /* Keep device tree and initrd in lower memory so the kernel can access them */ 91 #define CONFIG_EXTRA_ENV_SETTINGS \ 92 "fdt_high=0x10000000\0" \ 93 "initrd_high=0x10000000\0" 94 95 /* SPL */ 96 /* 97 * Select the boot device here 98 * 99 * Currently supported are: 100 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash 101 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) 102 */ 103 #define SPL_BOOT_SPI_NOR_FLASH 1 104 #define SPL_BOOT_SDIO_MMC_CARD 2 105 #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD 106 107 /* Defines for SPL */ 108 #define CONFIG_SPL_FRAMEWORK 109 #define CONFIG_SPL_SIZE (140 << 10) 110 #define CONFIG_SPL_TEXT_BASE 0x40000030 111 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) 112 113 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) 114 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 115 116 #ifdef CONFIG_SPL_BUILD 117 #define CONFIG_SYS_MALLOC_SIMPLE 118 #endif 119 120 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 121 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 122 123 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH 124 /* SPL related SPI defines */ 125 #define CONFIG_SPL_SPI_LOAD 126 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 127 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 128 #endif 129 130 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD 131 /* SPL related MMC defines */ 132 #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) 133 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS 134 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\ 135 + 1) 136 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ 137 #ifdef CONFIG_SPL_BUILD 138 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ 139 #endif 140 #endif 141 142 /* 143 * mv-common.h should be defined after CMD configs since it used them 144 * to enable certain macros 145 */ 146 #include "mv-common.h" 147 148 #endif /* _CONFIG_CLEARFOG_H */ 149