1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2015 CompuLab, Ltd.
4  *
5  * Configuration settings for the CompuLab CL-SOM-iMX7 System-on-Module.
6  */
7 
8 #ifndef __CL_SOM_IMX7_CONFIG_H
9 #define __CL_SOM_IMX7_CONFIG_H
10 
11 #include "mx7_common.h"
12 
13 #define CONFIG_DBG_MONITOR
14 
15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
16 
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
19 
20 #define CONFIG_BOARD_LATE_INIT
21 
22 /* Uncomment to enable secure boot support */
23 /* #define CONFIG_SECURE_BOOT */
24 #define CONFIG_CSF_SIZE			0x4000
25 
26 /* Network */
27 #define CONFIG_FEC_MXC
28 #define CONFIG_FEC_XCV_TYPE             RGMII
29 #define CONFIG_ETHPRIME                 "FEC"
30 #define CONFIG_FEC_MXC_PHYADDR          0
31 
32 #define CONFIG_PHYLIB
33 #define CONFIG_PHY_ATHEROS
34 /* ENET1 */
35 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
36 
37 /* PMIC */
38 #define CONFIG_POWER
39 #define CONFIG_POWER_I2C
40 #define CONFIG_POWER_PFUZE3000
41 #define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
42 
43 #undef CONFIG_BOOTM_NETBSD
44 #undef CONFIG_BOOTM_PLAN9
45 #undef CONFIG_BOOTM_RTEMS
46 
47 /* I2C configs */
48 #define CONFIG_SYS_I2C
49 #define CONFIG_SYS_I2C_MXC
50 #define CONFIG_SYS_I2C_MXC_I2C2		/* Enable I2C bus 2 */
51 #define CONFIG_SYS_I2C_SPEED		100000
52 #define SYS_I2C_BUS_SOM			0
53 
54 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
55 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
56 #define CONFIG_SYS_I2C_EEPROM_BUS	SYS_I2C_BUS_SOM
57 
58 #define CONFIG_PCA953X
59 #define CONFIG_CMD_PCA953X
60 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x20
61 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x20, 16} }
62 
63 #undef CONFIG_SYS_AUTOLOAD
64 #undef CONFIG_EXTRA_ENV_SETTINGS
65 #undef CONFIG_BOOTCOMMAND
66 
67 #define CONFIG_SYS_AUTOLOAD		"no"
68 
69 #define CONFIG_EXTRA_ENV_SETTINGS \
70 	"autoload=off\0" \
71 	"script=boot.scr\0" \
72 	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \
73 	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \
74 	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${fdtfile};\0" \
75 	"bootscript=echo Running bootscript from ${storagetype} ...; source ${loadaddr};\0" \
76 	"storagebootcmd=echo Booting from ${storagetype} ...; run ${storagetype}args; run doboot;\0" \
77 	"kernel=zImage\0" \
78 	"console=ttymxc0\0" \
79 	"fdt_high=0xffffffff\0" \
80 	"initrd_high=0xffffffff\0" \
81 	"fdtfile=imx7d-sbc-imx7.dtb\0" \
82 	"fdtaddr=0x83000000\0" \
83 	"mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \
84 	"usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \
85 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
86 	"usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \
87 	"doboot=bootz ${loadaddr} - ${fdtaddr}\0" \
88 	"mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \
89 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
90 		"root=/dev/mmcblk${mmcblk}p2 rootwait rw\0" \
91 	"mmcbootscript=" \
92 		"if run mmc_config; then " \
93 			"setenv storagetype mmc;" \
94 			"setenv storagedev ${mmcdev}:${mmcpart};" \
95 			"if run loadscript; then " \
96 				"run bootscript; " \
97 			"fi; " \
98 		"fi;\0" \
99 	"mmcboot=" \
100 		"if run mmc_config; then " \
101 			"setenv storagetype mmc;" \
102 			"setenv storagedev ${mmcdev}:${mmcpart};" \
103 			"if run loadkernel; then " \
104 				"if run loadfdt; then " \
105 					"run storagebootcmd;" \
106 				"fi; " \
107 			"fi; " \
108 		"fi;\0" \
109 	"sdbootscript=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; " \
110 		"run mmcbootscript\0" \
111 	"usbbootscript=setenv usbdev ${usbdev_def}; " \
112 		"setenv storagetype usb;" \
113 		"setenv storagedev ${usbdev}:${usbpart};" \
114 		"if run loadscript; then " \
115 			"run bootscript; " \
116 		"fi; " \
117 	"sdboot=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; run mmcboot\0" \
118 	"emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \
119 	"emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \
120 
121 #define CONFIG_BOOTCOMMAND \
122 	"echo SD boot attempt ...; run sdbootscript; run sdboot; " \
123 	"echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \
124 	"echo USB boot attempt ...; run usbbootscript; "
125 
126 #define CONFIG_SYS_MEMTEST_START	0x80000000
127 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
128 
129 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
130 #define CONFIG_SYS_HZ			1000
131 
132 /* Physical Memory Map */
133 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
134 
135 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
136 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
137 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
138 
139 #define CONFIG_SYS_INIT_SP_OFFSET \
140 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
141 #define CONFIG_SYS_INIT_SP_ADDR \
142 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
143 
144 /* SPI Flash support */
145 #define CONFIG_SF_DEFAULT_BUS		0
146 #define CONFIG_SF_DEFAULT_CS		0
147 #define CONFIG_SF_DEFAULT_SPEED		20000000
148 #define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
149 
150 /* FLASH and environment organization */
151 #define CONFIG_ENV_SIZE			SZ_8K
152 #define CONFIG_ENV_OFFSET		(768 * 1024)
153 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
154 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
155 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
156 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
157 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
158 
159 /* MMC Config*/
160 #define CONFIG_FSL_USDHC
161 #ifdef CONFIG_FSL_USDHC
162 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
163 
164 #define CONFIG_SYS_FSL_USDHC_NUM	2
165 #define CONFIG_MMCROOT			"/dev/mmcblk0p2" /* USDHC1 */
166 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
167 #endif
168 
169 /* USB Configs */
170 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
171 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
172 #define CONFIG_MXC_USB_FLAGS   0
173 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
174 
175 /* Uncomment to enable iMX thermal driver support */
176 /*#define CONFIG_IMX_THERMAL*/
177 
178 /* SPL */
179 #include "imx7_spl.h"
180 #ifdef CONFIG_SPL_BUILD
181 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
182 #endif /* CONFIG_SPL_BUILD */
183 
184 #endif	/* __CONFIG_H */
185