1 /* 2 * Configuration settings for CompuLab CL-SOM-AM57x board 3 * 4 * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ 5 * 6 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_CL_SOM_AM57X_H 12 #define __CONFIG_CL_SOM_AM57X_H 13 14 #define CONFIG_DRA7XX 15 16 #define CONFIG_NR_DRAM_BANKS 2 17 18 #define CONSOLEDEV "ttyO2" 19 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 20 #define CONFIG_CONS_INDEX 3 21 #define CONFIG_BAUDRATE 115200 22 23 #define CONFIG_SYS_OMAP_ABE_SYSCK 24 25 #include <configs/ti_omap5_common.h> 26 27 /* misc */ 28 #define CONFIG_MISC_INIT_R 29 #define CONFIG_REVISION_TAG 30 31 /* PMIC I2C bus number */ 32 #define CONFIG_SYS_SPD_BUS_NUM 3 33 34 /* SPI Flash support */ 35 #undef CONFIG_OMAP3_SPI 36 37 #define CONFIG_TI_SPI_MMAP 38 #define CONFIG_SF_DEFAULT_SPEED 48000000 39 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 40 41 /* SPI SPL defines */ 42 /* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */ 43 #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) 44 #define CONFIG_SPL_SPI_SUPPORT 45 #define CONFIG_SPL_SPI_FLASH_SUPPORT 46 #define CONFIG_SPL_SPI_LOAD 47 48 /* SD/MMC RAW boot */ 49 #undef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME 50 #undef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 51 52 /* Environment */ 53 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB env size */ 54 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 55 56 #define CONFIG_ENV_IS_IN_SPI_FLASH 57 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 58 #define CONFIG_ENV_OFFSET (768 * 1024) 59 #define CONFIG_ENV_SPI_MAX_HZ 48000000 60 61 /* EEPROM */ 62 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 63 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 64 #define CONFIG_SYS_I2C_EEPROM_BUS 3 65 66 #define CONFIG_CMD_EEPROM 67 #define CONFIG_CMD_EEPROM_LAYOUT 68 #define CONFIG_ENV_EEPROM_IS_ON_I2C 69 #define CONFIG_SYS_EEPROM_SIZE 256 70 71 #ifndef CONFIG_SPL_BUILD 72 /* SATA */ 73 #define CONFIG_CMD_SCSI 74 #define CONFIG_LIBATA 75 #define CONFIG_SCSI_AHCI 76 #define CONFIG_SCSI_AHCI_PLAT 77 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 78 #define CONFIG_SYS_SCSI_MAX_LUN 1 79 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 80 CONFIG_SYS_SCSI_MAX_LUN) 81 /* PCA9555 GPIO expander support */ 82 #define CONFIG_PCA953X 83 #define CONFIG_CMD_PCA953X 84 #define CONFIG_CMD_PCA953X_INFO 85 #define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 86 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } 87 88 /* USB xHCI HOST */ 89 #define CONFIG_USB_XHCI_OMAP 90 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 91 92 #define CONFIG_OMAP_USB_PHY 93 #define CONFIG_OMAP_USB3PHY1_HOST 94 95 /* USB Networking options */ 96 #define CONFIG_USB_HOST_ETHER 97 #define CONFIG_USB_ETHER_SMSC95XX 98 #define CONFIG_USB_ETHER_RNDIS 99 #define CONFIG_USB_ETHER_ASIX 100 #define CONFIG_USB_ETHER_MCS7830 101 102 #endif /* !CONFIG_SPL_BUILD */ 103 104 /* CPSW Ethernet */ 105 #define CONFIG_DRIVER_TI_CPSW 106 #define CONFIG_MII 107 #define CONFIG_BOOTP_DEFAULT 108 #define CONFIG_BOOTP_SEND_HOSTNAME 109 #define CONFIG_BOOTP_GATEWAY 110 #define CONFIG_PHY_GIGE 111 #define CONFIG_PHY_ATHEROS 112 #define CONFIG_PHYLIB 113 #define CONFIG_SYS_RX_ETH_BUFFER 64 114 #define PHY_ANEG_TIMEOUT 8000 115 116 #define CONFIG_BOOTP_DNS 117 #define CONFIG_BOOTP_DNS2 118 #define CONFIG_BOOTP_SUBNETMASK 119 #define CONFIG_NET_RETRY_COUNT 10 120 121 /* Default environment */ 122 #undef CONFIG_EXTRA_ENV_SETTINGS 123 #define CONFIG_EXTRA_ENV_SETTINGS \ 124 DEFAULT_LINUX_BOOT_ENV \ 125 "autoload=no\0" \ 126 "baudrate=115200\0" \ 127 "console=ttyO2,115200n8\0" \ 128 "bootdelay=3\0" \ 129 "fdtfile=am57xx-sbc-am57x.dtb\0" \ 130 "kernel=zImage-cl-som-am57x\0" \ 131 "bootscr=bootscr.img\0" \ 132 "displaytype=hdmi\0" \ 133 "bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \ 134 "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ 135 "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ 136 "load_mmc=mmc dev ${mmcdev} && mmc rescan && " \ 137 "run mmcloadkernel run mmcloadfdt\0" \ 138 "mmcroot=/dev/mmcblk1p2\0" \ 139 "mmcrootfstype=ext4 rw rootwait\0" \ 140 "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \ 141 "rootfstype=${mmcrootfstype}\0" \ 142 "mmcbootscript=setenv mmcdev 0; mmc dev ${mmcdev} && mmc rescan && " \ 143 "load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \ 144 "echo Running bootscript from MMC/SD Card ... && " \ 145 "source ${loadaddr}\0" \ 146 "mmcboot=setenv mmcdev 0 && run load_mmc && " \ 147 "run mmcargs && echo Booting from MMC/SD Card ... && " \ 148 "run bootkernel\0" \ 149 "emmcroot=/dev/mmcblk0p2\0" \ 150 "emmcrootfstype=ext4 rw rootwait\0" \ 151 "emmcargs=setenv bootargs console=${console} " \ 152 "root=${emmcroot} " \ 153 "rootfstype=${emmcrootfstype}\0" \ 154 "emmcbootscript=setenv mmcdev 1; mmc dev ${mmcdev} && mmc rescan && " \ 155 "load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \ 156 "echo Running bootscript from eMMC ... && " \ 157 "source ${loadaddr}\0" \ 158 "emmcboot=setenv mmcdev 1 && run load_mmc && " \ 159 "run emmcargs && echo Booting from eMMC ... && " \ 160 "run bootkernel\0" \ 161 "sataroot=/dev/sda2\0" \ 162 "satarootfstype=ext4 rw rootwait\0" \ 163 "load_sata=load scsi 0 ${loadaddr} ${kernel} && " \ 164 "load scsi 0 ${fdtaddr} ${fdtfile}\0" \ 165 "sataargs=setenv bootargs console=${console} " \ 166 "root=${sataroot} " \ 167 "rootfstype=${satarootfstype}\0" \ 168 "satabootscript=load scsi 0 ${loadaddr} ${bootscr} && " \ 169 "echo Running bootscript from SATA ... && " \ 170 "source ${loadaddr}\0" \ 171 "sataboot=run load_sata && run sataargs && " \ 172 "echo Booting from SATA ... && " \ 173 "run bootkernel\0" \ 174 175 #undef CONFIG_BOOTCOMMAND 176 #define CONFIG_BOOTCOMMAND \ 177 "run mmcbootscript || run mmcboot || " \ 178 "run satabootscript || run sataboot || " \ 179 "run emmcbootscript || run emmcboot" 180 181 182 #endif /* __CONFIG_CL_SOM_AM57X_H */ 183