1 /* 2 * 3 * Congatec Conga-QEVAl board configuration file. 4 * 5 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. 6 * Based on Freescale i.MX6Q Sabre Lite board configuration file. 7 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> 8 * Leo Sartre, <lsartre@adeneo-embedded.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_CGTQMX6EVAL_H 14 #define __CONFIG_CGTQMX6EVAL_H 15 16 #include "mx6_common.h" 17 18 #define CONFIG_MACH_TYPE 4122 19 20 /* Size of malloc() pool */ 21 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 22 23 #define CONFIG_BOARD_EARLY_INIT_F 24 #define CONFIG_MISC_INIT_R 25 26 #define CONFIG_MXC_UART 27 #define CONFIG_MXC_UART_BASE UART2_BASE 28 29 /* MMC Configs */ 30 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 31 32 /* Miscellaneous commands */ 33 #define CONFIG_CMD_BMODE 34 35 /* Thermal support */ 36 #define CONFIG_IMX_THERMAL 37 38 /* I2C Configs */ 39 #define CONFIG_CMD_I2C 40 #define CONFIG_SYS_I2C 41 #define CONFIG_SYS_I2C_MXC 42 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 43 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 44 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 45 #define CONFIG_SYS_I2C_SPEED 100000 46 47 /* PMIC */ 48 #define CONFIG_POWER 49 #define CONFIG_POWER_I2C 50 #define CONFIG_POWER_PFUZE100 51 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 52 53 /* USB Configs */ 54 #define CONFIG_CMD_USB 55 #define CONFIG_CMD_FAT 56 #define CONFIG_USB_EHCI 57 #define CONFIG_USB_EHCI_MX6 58 #define CONFIG_USB_STORAGE 59 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 60 #define CONFIG_USB_HOST_ETHER 61 #define CONFIG_USB_ETHER_ASIX 62 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 63 #define CONFIG_MXC_USB_FLAGS 0 64 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */ 65 #define CONFIG_USB_KEYBOARD 66 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 67 68 #define CONFIG_CI_UDC 69 #define CONFIG_USBD_HS 70 #define CONFIG_USB_GADGET_DUALSPEED 71 72 #define CONFIG_USB_GADGET 73 #define CONFIG_CMD_USB_MASS_STORAGE 74 #define CONFIG_USB_FUNCTION_MASS_STORAGE 75 #define CONFIG_USB_GADGET_DOWNLOAD 76 #define CONFIG_USB_GADGET_VBUS_DRAW 2 77 78 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 79 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 80 #define CONFIG_G_DNL_MANUFACTURER "Congatec" 81 82 /* Framebuffer */ 83 #define CONFIG_VIDEO 84 #define CONFIG_VIDEO_IPUV3 85 #define CONFIG_CFB_CONSOLE 86 #define CONFIG_VGA_AS_SINGLE_DEVICE 87 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 88 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 89 #define CONFIG_VIDEO_BMP_RLE8 90 #define CONFIG_SPLASH_SCREEN 91 #define CONFIG_SPLASH_SCREEN_ALIGN 92 #define CONFIG_BMP_16BPP 93 #define CONFIG_VIDEO_LOGO 94 #define CONFIG_VIDEO_BMP_LOGO 95 #ifdef CONFIG_MX6DL 96 #define CONFIG_IPUV3_CLK 198000000 97 #else 98 #define CONFIG_IPUV3_CLK 264000000 99 #endif 100 #define CONFIG_IMX_HDMI 101 102 /* SATA */ 103 #define CONFIG_CMD_SATA 104 #define CONFIG_DWC_AHSATA 105 #define CONFIG_SYS_SATA_MAX_DEVICE 1 106 #define CONFIG_DWC_AHSATA_PORT_ID 0 107 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 108 #define CONFIG_LBA48 109 #define CONFIG_LIBATA 110 111 /* Ethernet */ 112 #define CONFIG_CMD_PING 113 #define CONFIG_CMD_DHCP 114 #define CONFIG_CMD_MII 115 #define CONFIG_FEC_MXC 116 #define CONFIG_MII 117 #define IMX_FEC_BASE ENET_BASE_ADDR 118 #define CONFIG_FEC_XCV_TYPE RGMII 119 #define CONFIG_ETHPRIME "FEC" 120 #define CONFIG_FEC_MXC_PHYADDR 6 121 #define CONFIG_PHYLIB 122 #define CONFIG_PHY_ATHEROS 123 124 /* Command definition */ 125 126 #define CONFIG_MXC_UART_BASE UART2_BASE 127 #define CONFIG_CONSOLE_DEV "ttymxc1" 128 #define CONFIG_MMCROOT "/dev/mmcblk0p2" 129 #define CONFIG_SYS_MMC_ENV_DEV 0 130 131 #define CONFIG_EXTRA_ENV_SETTINGS \ 132 "script=boot.scr\0" \ 133 "image=zImage\0" \ 134 "fdtfile=imx6q-qmx6.dtb\0" \ 135 "fdt_addr_r=0x18000000\0" \ 136 "boot_fdt=try\0" \ 137 "ip_dyn=yes\0" \ 138 "console=" CONFIG_CONSOLE_DEV "\0" \ 139 "bootm_size=0x10000000\0" \ 140 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 141 "mmcpart=1\0" \ 142 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 143 "update_sd_firmware=" \ 144 "if test ${ip_dyn} = yes; then " \ 145 "setenv get_cmd dhcp; " \ 146 "else " \ 147 "setenv get_cmd tftp; " \ 148 "fi; " \ 149 "if mmc dev ${mmcdev}; then " \ 150 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 151 "setexpr fw_sz ${filesize} / 0x200; " \ 152 "setexpr fw_sz ${fw_sz} + 1; " \ 153 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 154 "fi; " \ 155 "fi\0" \ 156 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 157 "root=${mmcroot}\0" \ 158 "loadbootscript=" \ 159 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 160 "bootscript=echo Running bootscript from mmc ...; " \ 161 "source\0" \ 162 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 163 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \ 164 "mmcboot=echo Booting from mmc ...; " \ 165 "run mmcargs; " \ 166 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 167 "if run loadfdt; then " \ 168 "bootz ${loadaddr} - ${fdt_addr_r}; " \ 169 "else " \ 170 "if test ${boot_fdt} = try; then " \ 171 "bootz; " \ 172 "else " \ 173 "echo WARN: Cannot load the DT; " \ 174 "fi; " \ 175 "fi; " \ 176 "else " \ 177 "bootz; " \ 178 "fi;\0" \ 179 "netargs=setenv bootargs console=${console},${baudrate} " \ 180 "root=/dev/nfs " \ 181 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 182 "netboot=echo Booting from net ...; " \ 183 "run netargs; " \ 184 "if test ${ip_dyn} = yes; then " \ 185 "setenv get_cmd dhcp; " \ 186 "else " \ 187 "setenv get_cmd tftp; " \ 188 "fi; " \ 189 "${get_cmd} ${image}; " \ 190 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 191 "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \ 192 "bootz ${loadaddr} - ${fdt_addr_r}; " \ 193 "else " \ 194 "if test ${boot_fdt} = try; then " \ 195 "bootz; " \ 196 "else " \ 197 "echo WARN: Cannot load the DT; " \ 198 "fi; " \ 199 "fi; " \ 200 "else " \ 201 "bootz; " \ 202 "fi;\0" \ 203 204 #define CONFIG_BOOTCOMMAND \ 205 "mmc dev ${mmcdev};" \ 206 "if mmc rescan; then " \ 207 "if run loadbootscript; then " \ 208 "run bootscript; " \ 209 "else " \ 210 "if run loadimage; then " \ 211 "run mmcboot; " \ 212 "else run netboot; " \ 213 "fi; " \ 214 "fi; " \ 215 "else run netboot; fi" 216 217 #define CONFIG_SYS_MEMTEST_START 0x10000000 218 #define CONFIG_SYS_MEMTEST_END 0x10010000 219 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 220 221 /* Physical Memory Map */ 222 #define CONFIG_NR_DRAM_BANKS 1 223 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 224 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 225 226 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 227 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 228 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 229 230 #define CONFIG_SYS_INIT_SP_OFFSET \ 231 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 232 #define CONFIG_SYS_INIT_SP_ADDR \ 233 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 234 235 /* Environment organization */ 236 #define CONFIG_ENV_SIZE (8 * 1024) 237 238 #define CONFIG_ENV_IS_IN_MMC 239 240 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 241 #define CONFIG_SYS_MMC_ENV_DEV 0 242 243 #endif /* __CONFIG_CGTQMX6EVAL_H */ 244