1 /* 2 * brtpp1.h 3 * 4 * specific parts for B&R T-Series Motherboard 5 * 6 * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> - 7 * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_BRPPT1_H__ 13 #define __CONFIG_BRPPT1_H__ 14 15 #include <configs/bur_cfg_common.h> 16 #include <configs/bur_am335x_common.h> 17 /* ------------------------------------------------------------------------- */ 18 #define CONFIG_AM335X_LCD 19 #define CONFIG_LCD_ROTATION 20 #define CONFIG_LCD_DT_SIMPLEFB 21 #define CONFIG_SYS_WHITE_ON_BLACK 22 #define LCD_BPP LCD_COLOR32 23 24 #define CONFIG_HW_WATCHDOG 25 #define CONFIG_OMAP_WATCHDOG 26 27 /* Bootcount using the RTC block */ 28 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 29 #define CONFIG_BOOTCOUNT_LIMIT 30 #define CONFIG_BOOTCOUNT_AM33XX 31 32 /* memory */ 33 #define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) 34 35 /* Clock Defines */ 36 #define V_OSCK 26000000 /* Clock output from T2 */ 37 #define V_SCLK (V_OSCK) 38 39 #define CONFIG_POWER_TPS65217 40 41 /* Support both device trees and ATAGs. */ 42 #define CONFIG_USE_FDT /* use fdt within board code */ 43 #define CONFIG_CMDLINE_TAG 44 #define CONFIG_SETUP_MEMORY_TAGS 45 #define CONFIG_INITRD_TAG 46 /*#define CONFIG_MACH_TYPE 3589*/ 47 #define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/ 48 49 /* MMC/SD IP block */ 50 #if defined(CONFIG_EMMC_BOOT) 51 #define CONFIG_MMC 52 #define CONFIG_GENERIC_MMC 53 #define CONFIG_OMAP_HSMMC 54 #define CONFIG_SUPPORT_EMMC_BOOT 55 /* RAW SD card / eMMC locations. */ 56 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ 57 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ 58 #endif /* CONFIG_EMMC_BOOT */ 59 60 /* 61 * When we have SPI or NAND flash we expect to be making use of mtdparts, 62 * both for ease of use in U-Boot and for passing information on to 63 * the Linux kernel. 64 */ 65 #if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND) 66 #define CONFIG_MTD_DEVICE /* Required for mtdparts */ 67 #define CONFIG_CMD_MTDPARTS 68 #endif /* CONFIG_SPI_BOOT, ... */ 69 70 #ifdef CONFIG_SPL_OS_BOOT 71 #define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 72 73 /* RAW SD card / eMMC */ 74 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ 75 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ 76 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ 77 78 /* NAND */ 79 #ifdef CONFIG_NAND 80 #define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */ 81 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 82 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 83 #endif /* CONFIG_NAND */ 84 #endif /* CONFIG_SPL_OS_BOOT */ 85 86 #ifdef CONFIG_NAND 87 #define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */ 88 #define CONFIG_SPL_NAND_BASE 89 #define CONFIG_SPL_NAND_DRIVERS 90 #define CONFIG_SPL_NAND_ECC 91 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 92 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 93 #endif /* CONFIG_NAND */ 94 95 /* Always 64 KiB env size */ 96 #define CONFIG_ENV_SIZE (64 << 10) 97 98 #ifdef CONFIG_NAND 99 #define NANDARGS \ 100 "mtdids=" MTDIDS_DEFAULT "\0" \ 101 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 102 "nandargs=setenv bootargs console=${console} " \ 103 "${optargs} " \ 104 "${optargs_rot} " \ 105 "root=mtd6 " \ 106 "rootfstype=jffs2\0" \ 107 "kernelsize=0x400000\0" \ 108 "nandboot=echo booting from nand ...; " \ 109 "run nandargs; " \ 110 "nand read ${loadaddr} kernel ${kernelsize}; " \ 111 "bootz ${loadaddr} - ${dtbaddr}\0" \ 112 "defboot=run nandboot\0" \ 113 "bootlimit=1\0" \ 114 "simplefb=1\0 " \ 115 "altbootcmd=run usbscript\0" 116 #else 117 #define NANDARGS "" 118 #endif /* CONFIG_NAND */ 119 120 #ifdef CONFIG_MMC 121 #define MMCARGS \ 122 "dtbdev=mmc\0" \ 123 "dtbpart=0:1\0" \ 124 "mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \ 125 "mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \ 126 "root=/dev/mmcblk0p2 rootfstype=ext4\0" \ 127 "mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \ 128 "setenv simplefb 1; " \ 129 "ext4load mmc 0:1 ${loadaddr} /${kernel}; " \ 130 "ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \ 131 "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \ 132 "mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \ 133 "setenv simplefb 0; " \ 134 "ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \ 135 "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \ 136 "defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \ 137 "ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \ 138 "run ramboot; run usbscript;\0" \ 139 "bootlimit=1\0" \ 140 "altbootcmd=run mmcboot0;\0" \ 141 "upduboot=dhcp; " \ 142 "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \ 143 "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0" 144 #else 145 #define MMCARGS "" 146 #endif /* CONFIG_MMC */ 147 148 #ifndef CONFIG_SPL_BUILD 149 #define CONFIG_EXTRA_ENV_SETTINGS \ 150 BUR_COMMON_ENV \ 151 "verify=no\0" \ 152 "autoload=0\0" \ 153 "dtb=bur-ppt-ts30.dtb\0" \ 154 "dtbaddr=0x80100000\0" \ 155 "loadaddr=0x80200000\0" \ 156 "ramaddr=0x80A00000\0" \ 157 "kernel=zImage\0" \ 158 "ramdisk=rootfs.cpio.uboot\0" \ 159 "console=ttyO0,115200n8\0" \ 160 "optargs=consoleblank=0 quiet panic=2\0" \ 161 "nfsroot=/tftpboot/tseries/rootfs-small\0" \ 162 "nfsopts=nolock\0" \ 163 "ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \ 164 "netargs=setenv bootargs console=${console} " \ 165 "${optargs} " \ 166 "root=/dev/nfs " \ 167 "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \ 168 "ip=dhcp\0" \ 169 "netboot=echo Booting from network ...; " \ 170 "dhcp; " \ 171 "tftp ${loadaddr} ${kernel}; " \ 172 "tftp ${dtbaddr} ${dtb}; " \ 173 "run netargs; " \ 174 "bootz ${loadaddr} - ${dtbaddr}\0" \ 175 "ramboot=echo Booting from network into RAM ...; "\ 176 "if dhcp; then; " \ 177 "tftp ${loadaddr} ${kernel}; " \ 178 "tftp ${ramaddr} ${ramdisk}; " \ 179 "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \ 180 "then; else tftp ${dtbaddr} ${dtb}; fi;" \ 181 "run mmcroot0; " \ 182 "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \ 183 "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \ 184 "setenv autoload 0; " \ 185 "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \ 186 NANDARGS \ 187 MMCARGS 188 #endif /* !CONFIG_SPL_BUILD*/ 189 190 #define CONFIG_BOOTCOMMAND \ 191 "run defboot;" 192 193 #ifdef CONFIG_NAND 194 /* 195 * GPMC block. We support 1 device and the physical address to 196 * access CS0 at is 0x8000000. 197 */ 198 #define CONFIG_SYS_MAX_NAND_DEVICE 1 199 #define CONFIG_SYS_NAND_BASE 0x8000000 200 #define CONFIG_NAND_OMAP_GPMC 201 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ 202 #define CONFIG_NAND_OMAP_ELM 203 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 204 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 205 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 206 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 207 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 208 CONFIG_SYS_NAND_PAGE_SIZE) 209 #define CONFIG_SYS_NAND_OOBSIZE 64 210 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 211 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \ 212 10, 11, 12, 13, 14, 15, 16, 17, \ 213 18, 19, 20, 21, 22, 23, 24, 25, \ 214 26, 27, 28, 29, 30, 31, 32, 33, \ 215 34, 35, 36, 37, 38, 39, 40, 41, \ 216 42, 43, 44, 45, 46, 47, 48, 49, \ 217 50, 51, 52, 53, 54, 55, 56, 57, } 218 219 #define CONFIG_SYS_NAND_ECCSIZE 512 220 #define CONFIG_SYS_NAND_ECCBYTES 14 221 222 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 223 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 224 225 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 226 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ 227 "128k(MLO)," \ 228 "128k(MLO.backup)," \ 229 "128k(dtb)," \ 230 "128k(u-boot-env)," \ 231 "512k(u-boot)," \ 232 "4m(kernel),"\ 233 "128m(rootfs),"\ 234 "-(user)" 235 #define CONFIG_NAND_OMAP_GPMC_WSCFG 1 236 #endif /* CONFIG_NAND */ 237 238 /* USB configuration */ 239 #define CONFIG_USB_MUSB_DSPS 240 #define CONFIG_ARCH_MISC_INIT 241 #define CONFIG_USB_MUSB_PIO_ONLY 242 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 243 #define CONFIG_AM335X_USB0 244 #define CONFIG_AM335X_USB0_MODE MUSB_HOST 245 #define CONFIG_AM335X_USB1 246 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 247 248 #if defined(CONFIG_SPI_BOOT) 249 /* McSPI IP block */ 250 #define CONFIG_SPI 251 #define CONFIG_OMAP3_SPI 252 #define CONFIG_SF_DEFAULT_SPEED 24000000 253 254 #define CONFIG_SPL_SPI_LOAD 255 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 256 #undef CONFIG_ENV_IS_NOWHERE 257 #define CONFIG_ENV_IS_IN_SPI_FLASH 258 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 259 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 260 #define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 261 #define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ 262 #define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ 263 264 #elif defined(CONFIG_EMMC_BOOT) 265 #undef CONFIG_ENV_IS_NOWHERE 266 #define CONFIG_ENV_IS_IN_MMC 267 #define CONFIG_SYS_MMC_ENV_DEV 0 268 #define CONFIG_SYS_MMC_ENV_PART 2 269 #define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */ 270 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 271 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 272 273 #elif defined(CONFIG_NAND) 274 /* No NAND env support in SPL */ 275 #ifdef CONFIG_SPL_BUILD 276 #define CONFIG_ENV_IS_NOWHERE 277 #else 278 #define CONFIG_ENV_IS_IN_NAND 279 #endif 280 #define CONFIG_ENV_OFFSET 0x60000 281 #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE 282 #else 283 #error "no storage for Environment defined!" 284 #endif 285 /* 286 * Common filesystems support. When we have removable storage we 287 * enabled a number of useful commands and support. 288 */ 289 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) 290 #define CONFIG_DOS_PARTITION 291 #define CONFIG_FAT_WRITE 292 #define CONFIG_FS_EXT4 293 #define CONFIG_EXT4_WRITE 294 #endif /* CONFIG_MMC, ... */ 295 296 #endif /* ! __CONFIG_BRPPT1_H__ */ 297