1 /* 2 * brtpp1.h 3 * 4 * specific parts for B&R T-Series Motherboard 5 * 6 * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> - 7 * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_BRPPT1_H__ 13 #define __CONFIG_BRPPT1_H__ 14 15 #include <configs/bur_cfg_common.h> 16 #include <configs/bur_am335x_common.h> 17 /* ------------------------------------------------------------------------- */ 18 #define CONFIG_AM335X_LCD 19 #define CONFIG_LCD_ROTATION 20 #define CONFIG_LCD_DT_SIMPLEFB 21 #define LCD_BPP LCD_COLOR32 22 23 /* Bootcount using the RTC block */ 24 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 25 #define CONFIG_BOOTCOUNT_LIMIT 26 #define CONFIG_BOOTCOUNT_AM33XX 27 28 /* memory */ 29 #define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) 30 31 /* Clock Defines */ 32 #define V_OSCK 26000000 /* Clock output from T2 */ 33 #define V_SCLK (V_OSCK) 34 35 #define CONFIG_POWER_TPS65217 36 37 /* Support both device trees and ATAGs. */ 38 #define CONFIG_USE_FDT /* use fdt within board code */ 39 #define CONFIG_CMDLINE_TAG 40 #define CONFIG_SETUP_MEMORY_TAGS 41 #define CONFIG_INITRD_TAG 42 /*#define CONFIG_MACH_TYPE 3589*/ 43 #define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/ 44 45 /* MMC/SD IP block */ 46 #if defined(CONFIG_EMMC_BOOT) 47 #define CONFIG_SUPPORT_EMMC_BOOT 48 #endif /* CONFIG_EMMC_BOOT */ 49 50 /* 51 * When we have SPI or NAND flash we expect to be making use of mtdparts, 52 * both for ease of use in U-Boot and for passing information on to 53 * the Linux kernel. 54 */ 55 #if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND) 56 #define CONFIG_MTD_DEVICE /* Required for mtdparts */ 57 #endif /* CONFIG_SPI_BOOT, ... */ 58 59 #ifdef CONFIG_SPL_OS_BOOT 60 #define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 61 62 /* RAW SD card / eMMC */ 63 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ 64 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ 65 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ 66 67 /* NAND */ 68 #ifdef CONFIG_NAND 69 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 70 #endif /* CONFIG_NAND */ 71 #endif /* CONFIG_SPL_OS_BOOT */ 72 73 #ifdef CONFIG_NAND 74 #define CONFIG_SPL_NAND_BASE 75 #define CONFIG_SPL_NAND_DRIVERS 76 #define CONFIG_SPL_NAND_ECC 77 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 78 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 79 #endif /* CONFIG_NAND */ 80 81 /* Always 64 KiB env size */ 82 #define CONFIG_ENV_SIZE (64 << 10) 83 84 #ifdef CONFIG_NAND 85 #define NANDARGS \ 86 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 87 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 88 "nandargs=setenv bootargs console=${console} " \ 89 "${optargs} " \ 90 "${optargs_rot} " \ 91 "root=mtd6 " \ 92 "rootfstype=jffs2\0" \ 93 "kernelsize=0x400000\0" \ 94 "nandboot=echo booting from nand ...; " \ 95 "run nandargs; " \ 96 "nand read ${loadaddr} kernel ${kernelsize}; " \ 97 "bootz ${loadaddr} - ${dtbaddr}\0" \ 98 "defboot=run nandboot\0" \ 99 "bootlimit=1\0" \ 100 "simplefb=1\0 " \ 101 "altbootcmd=run usbscript\0" 102 #else 103 #define NANDARGS "" 104 #endif /* CONFIG_NAND */ 105 106 #ifdef CONFIG_MMC 107 #define MMCARGS \ 108 "dtbdev=mmc\0" \ 109 "dtbpart=1:1\0" \ 110 "mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \ 111 "mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \ 112 "root=/dev/mmcblk0p2 rootfstype=ext4\0" \ 113 "mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \ 114 "setenv simplefb 1; " \ 115 "ext4load mmc 1:1 ${loadaddr} /${kernel}; " \ 116 "ext4load mmc 1:1 ${ramaddr} /${ramdisk}; " \ 117 "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \ 118 "mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \ 119 "setenv simplefb 0; " \ 120 "ext4load mmc 1:2 ${loadaddr} /boot/${kernel}; " \ 121 "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \ 122 "defboot=ext4load mmc 1:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \ 123 "ext4load mmc 1:1 ${dtbaddr} /$dtb && run mmcboot0; " \ 124 "run ramboot; run usbscript;\0" \ 125 "bootlimit=1\0" \ 126 "altbootcmd=mmc dev 1; run mmcboot0;\0" \ 127 "upduboot=dhcp; " \ 128 "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \ 129 "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0" 130 #else 131 #define MMCARGS "" 132 #endif /* CONFIG_MMC */ 133 134 #ifndef CONFIG_SPL_BUILD 135 #define CONFIG_EXTRA_ENV_SETTINGS \ 136 BUR_COMMON_ENV \ 137 "verify=no\0" \ 138 "autoload=0\0" \ 139 "dtb=bur-ppt-ts30.dtb\0" \ 140 "dtbaddr=0x80100000\0" \ 141 "loadaddr=0x80200000\0" \ 142 "ramaddr=0x80A00000\0" \ 143 "kernel=zImage\0" \ 144 "ramdisk=rootfs.cpio.uboot\0" \ 145 "console=ttyO0,115200n8\0" \ 146 "optargs=consoleblank=0 quiet panic=2\0" \ 147 "nfsroot=/tftpboot/tseries/rootfs-small\0" \ 148 "nfsopts=nolock\0" \ 149 "ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \ 150 "netargs=setenv bootargs console=${console} " \ 151 "${optargs} " \ 152 "root=/dev/nfs " \ 153 "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \ 154 "ip=dhcp\0" \ 155 "netboot=echo Booting from network ...; " \ 156 "dhcp; " \ 157 "tftp ${loadaddr} ${kernel}; " \ 158 "tftp ${dtbaddr} ${dtb}; " \ 159 "run netargs; " \ 160 "bootz ${loadaddr} - ${dtbaddr}\0" \ 161 "ramboot=echo Booting from network into RAM ...; "\ 162 "if dhcp; then; " \ 163 "tftp ${loadaddr} ${kernel}; " \ 164 "tftp ${ramaddr} ${ramdisk}; " \ 165 "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \ 166 "then; else tftp ${dtbaddr} ${dtb}; fi;" \ 167 "run mmcroot0; " \ 168 "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \ 169 "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \ 170 "setenv autoload 0; " \ 171 "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \ 172 NANDARGS \ 173 MMCARGS 174 #endif /* !CONFIG_SPL_BUILD*/ 175 176 #define CONFIG_BOOTCOMMAND \ 177 "mmc dev 1; run defboot;" 178 179 #ifdef CONFIG_NAND 180 /* 181 * GPMC block. We support 1 device and the physical address to 182 * access CS0 at is 0x8000000. 183 */ 184 #define CONFIG_SYS_MAX_NAND_DEVICE 1 185 #define CONFIG_SYS_NAND_BASE 0x8000000 186 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ 187 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 188 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 189 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 190 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 191 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 192 CONFIG_SYS_NAND_PAGE_SIZE) 193 #define CONFIG_SYS_NAND_OOBSIZE 64 194 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 195 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \ 196 10, 11, 12, 13, 14, 15, 16, 17, \ 197 18, 19, 20, 21, 22, 23, 24, 25, \ 198 26, 27, 28, 29, 30, 31, 32, 33, \ 199 34, 35, 36, 37, 38, 39, 40, 41, \ 200 42, 43, 44, 45, 46, 47, 48, 49, \ 201 50, 51, 52, 53, 54, 55, 56, 57, } 202 203 #define CONFIG_SYS_NAND_ECCSIZE 512 204 #define CONFIG_SYS_NAND_ECCBYTES 14 205 206 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 207 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 208 209 #define CONFIG_NAND_OMAP_GPMC_WSCFG 1 210 #endif /* CONFIG_NAND */ 211 212 /* USB configuration */ 213 #define CONFIG_USB_MUSB_DSPS 214 #define CONFIG_USB_MUSB_PIO_ONLY 215 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 216 #define CONFIG_AM335X_USB0 217 #define CONFIG_AM335X_USB0_MODE MUSB_HOST 218 #define CONFIG_AM335X_USB1 219 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 220 221 #if defined(CONFIG_SPI_BOOT) 222 /* McSPI IP block */ 223 #define CONFIG_SPI 224 #define CONFIG_SF_DEFAULT_SPEED 24000000 225 226 #define CONFIG_SPL_SPI_LOAD 227 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 228 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 229 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 230 #define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 231 #define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ 232 #define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ 233 234 #elif defined(CONFIG_EMMC_BOOT) 235 #define CONFIG_SYS_MMC_ENV_DEV 1 236 #define CONFIG_SYS_MMC_ENV_PART 2 237 #define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */ 238 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 239 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 240 241 #elif defined(CONFIG_NAND) 242 /* No NAND env support in SPL */ 243 #define CONFIG_ENV_OFFSET 0x60000 244 #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE 245 #else 246 #error "no storage for Environment defined!" 247 #endif 248 /* 249 * Common filesystems support. When we have removable storage we 250 * enabled a number of useful commands and support. 251 */ 252 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) 253 #define CONFIG_FS_EXT4 254 #define CONFIG_EXT4_WRITE 255 #endif /* CONFIG_MMC, ... */ 256 257 #endif /* ! __CONFIG_BRPPT1_H__ */ 258