1 /* 2 * Copyright 2016 3ADEV <http://3adev.com> 3 * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> 4 * 5 * Configuration settings for the phytec PCM-052 SoM-based BK4R1. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 /* Define the BK4r1-specific env commands */ 11 #define PCM052_EXTRA_ENV_SETTINGS \ 12 "set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \ 13 "set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0" 14 15 /* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/ 16 #define PCM052_BOOTCOMMAND "run set_gpio103; sf probe; " 17 18 /* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */ 19 #define PCM052_NET_INIT "run set_gpio122; " 20 21 /* add NOR to MTD env */ 22 #define MTDIDS_DEFAULT "nand0=NAND,nor0=NOR" 23 #define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\ 24 ",128k(env1)"\ 25 ",128k(env2)"\ 26 ",128k(dtb)"\ 27 ",6144k(kernel)"\ 28 ",-(root);"\ 29 "NOR:-(nor)" 30 31 /* now include standard PCM052 config */ 32 33 #include "configs/pcm052.h" 34