xref: /openbmc/u-boot/include/configs/bg0900.h (revision 20c700f8)
1 /*
2  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 #ifndef __CONFIGS_BG0900_H__
7 #define __CONFIGS_BG0900_H__
8 
9 /* System configurations */
10 #define CONFIG_MX28				/* i.MX28 SoC */
11 
12 /* U-Boot Commands */
13 #define CONFIG_SYS_NO_FLASH
14 #define CONFIG_DOS_PARTITION
15 
16 #define CONFIG_CMD_NAND
17 #define CONFIG_CMD_NAND_TRIMFFS
18 
19 /* Memory configuration */
20 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
21 #define PHYS_SDRAM_1			0x40000000	/* Base address */
22 #define PHYS_SDRAM_1_SIZE		0x10000000	/* Max 256 MB RAM */
23 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
24 
25 /* Environment */
26 #define CONFIG_ENV_SIZE			(16 * 1024)
27 #define CONFIG_ENV_OVERWRITE
28 #define CONFIG_ENV_IS_NOWHERE
29 
30 /* FEC Ethernet on SoC */
31 #ifdef	CONFIG_CMD_NET
32 #define CONFIG_FEC_MXC
33 #endif
34 
35 /* SPI */
36 #ifdef CONFIG_CMD_SPI
37 #define CONFIG_DEFAULT_SPI_BUS		2
38 #define CONFIG_DEFAULT_SPI_CS		0
39 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
40 
41 /* SPI FLASH */
42 #ifdef CONFIG_CMD_SF
43 #define CONFIG_SF_DEFAULT_BUS		2
44 #define CONFIG_SF_DEFAULT_CS		0
45 #define CONFIG_SF_DEFAULT_SPEED		40000000
46 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
47 
48 #define CONFIG_ENV_SPI_BUS		2
49 #define CONFIG_ENV_SPI_CS		0
50 #define CONFIG_ENV_SPI_MAX_HZ		40000000
51 #define CONFIG_ENV_SPI_MODE		SPI_MODE_0
52 #endif
53 
54 #endif
55 
56 /* Boot Linux */
57 #define CONFIG_BOOTFILE		"uImage"
58 #define CONFIG_BOOTARGS		"console=ttyAMA0,115200"
59 #define CONFIG_BOOTCOMMAND	"bootm"
60 #define CONFIG_LOADADDR		0x42000000
61 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
62 
63 /* Extra Environment */
64 #define CONFIG_EXTRA_ENV_SETTINGS					\
65 	"update_spi_firmware_filename=u-boot.sb\0"			\
66 	"update_spi_firmware_maxsz=0x80000\0"				\
67 	"update_spi_firmware="	/* Update the SPI flash firmware */	\
68 		"if sf probe 2:0 ; then "				\
69 		"if tftp ${update_spi_firmware_filename} ; then "	\
70 		"sf erase 0x0 +${filesize} ; "				\
71 		"sf write ${loadaddr} 0x0 ${filesize} ; "		\
72 		"fi ; "							\
73 		"fi\0"
74 
75 /* The rest of the configuration is shared */
76 #include <configs/mxs.h>
77 
78 #endif /* __CONFIGS_BG0900_H__ */
79