1 /*
2  * Copyright 2013 Broadcom Corporation.
3  *
4  * SPDX-License-Identifier:      GPL-2.0+
5  */
6 
7 #ifndef __BCM28155_AP_H
8 #define __BCM28155_AP_H
9 
10 #include <linux/sizes.h>
11 #include <asm/arch/sysmap.h>
12 
13 /* CPU, chip, mach, etc */
14 #define CONFIG_KONA
15 #define CONFIG_SKIP_LOWLEVEL_INIT
16 #define CONFIG_SYS_GENERIC_BOARD
17 
18 /*
19  * Memory configuration
20  */
21 #define CONFIG_SYS_TEXT_BASE		0xae000000
22 
23 #define CONFIG_SYS_SDRAM_BASE		0x80000000
24 #define CONFIG_SYS_SDRAM_SIZE		0x80000000
25 #define CONFIG_NR_DRAM_BANKS		1
26 
27 #define CONFIG_SYS_MALLOC_LEN		SZ_4M	/* see armv7/start.S. */
28 #define CONFIG_STACKSIZE		SZ_256K
29 
30 /* GPIO Driver */
31 #define CONFIG_KONA_GPIO
32 
33 /* MMC/SD Driver */
34 #define CONFIG_SDHCI
35 #define CONFIG_MMC_SDMA
36 #define CONFIG_KONA_SDHCI
37 #define CONFIG_MMC
38 #define CONFIG_GENERIC_MMC
39 
40 #define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
41 #define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
42 #define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
43 #define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR
44 #define CONFIG_SYS_SDIO0_MAX_CLK 48000000
45 #define CONFIG_SYS_SDIO1_MAX_CLK 48000000
46 #define CONFIG_SYS_SDIO2_MAX_CLK 48000000
47 #define CONFIG_SYS_SDIO3_MAX_CLK 48000000
48 #define CONFIG_SYS_SDIO0 "sdio1"
49 #define CONFIG_SYS_SDIO1 "sdio2"
50 #define CONFIG_SYS_SDIO2 "sdio3"
51 #define CONFIG_SYS_SDIO3 "sdio4"
52 
53 /* I2C Driver */
54 #define CONFIG_SYS_I2C
55 #define CONFIG_SYS_I2C_KONA
56 #define CONFIG_SYS_SPD_BUS_NUM	3	/* Start with PMU bus */
57 #define CONFIG_SYS_MAX_I2C_BUS	4
58 #define CONFIG_SYS_I2C_BASE0	BSC1_BASE_ADDR
59 #define CONFIG_SYS_I2C_BASE1	BSC2_BASE_ADDR
60 #define CONFIG_SYS_I2C_BASE2	BSC3_BASE_ADDR
61 #define CONFIG_SYS_I2C_BASE3	PMU_BSC_BASE_ADDR
62 
63 /* Timer Driver */
64 #define CONFIG_SYS_TIMER_RATE		32000
65 #define CONFIG_SYS_TIMER_COUNTER	(TIMER_BASE_ADDR + 4) /* STCLO offset */
66 
67 /* Init functions */
68 #define CONFIG_MISC_INIT_R	/* board's misc_init_r function */
69 
70 /* Some commands use this as the default load address */
71 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
72 
73 /* No mtest functions as recommended */
74 #undef CONFIG_CMD_MEMORY
75 
76 /*
77  * This is the initial SP which is used only briefly for relocating the u-boot
78  * image to the top of SDRAM. After relocation u-boot moves the stack to the
79  * proper place.
80  */
81 #define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
82 
83 /* Serial Info */
84 #define CONFIG_SYS_NS16550
85 #define CONFIG_SYS_NS16550_SERIAL
86 /* Post pad 3 bytes after each reg addr */
87 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
88 #define CONFIG_SYS_NS16550_CLK		13000000
89 #define CONFIG_CONS_INDEX		1
90 #define CONFIG_SYS_NS16550_COM1		0x3e000000
91 
92 #define CONFIG_BAUDRATE			115200
93 
94 #define CONFIG_ENV_SIZE			0x10000
95 #define CONFIG_ENV_IS_NOWHERE
96 
97 #define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */
98 
99 /* console configuration */
100 #define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
101 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
102 			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
103 #define CONFIG_SYS_MAXARGS		64
104 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
105 
106 /*
107  * One partition type must be defined for part.c
108  * This is necessary for the fatls command to work on an SD card
109  * for example.
110  */
111 #define CONFIG_DOS_PARTITION
112 
113 /* version string, parser, etc */
114 #define CONFIG_VERSION_VARIABLE
115 #define CONFIG_AUTO_COMPLETE
116 #define CONFIG_SYS_HUSH_PARSER
117 #define CONFIG_CMDLINE_EDITING
118 #define CONFIG_SYS_LONGHELP
119 
120 #define CONFIG_CRC32_VERIFY
121 #define CONFIG_MX_CYCLIC
122 
123 /* Initial upstream - boot to cmd prompt only */
124 #define CONFIG_BOOTCOMMAND		""
125 
126 /* Commands */
127 #include <config_cmd_default.h>
128 #define CONFIG_CMD_ASKENV
129 #define CONFIG_CMD_CACHE
130 #define CONFIG_CMD_FAT
131 #define CONFIG_CMD_GPIO
132 #define CONFIG_CMD_I2C
133 #define CONFIG_CMD_MMC
134 #define CONFIG_CMD_BOOTZ
135 #define CONFIG_FAT_WRITE
136 
137 #undef CONFIG_CMD_NET
138 #undef CONFIG_CMD_NFS
139 
140 #endif /* __BCM28155_AP_H */
141