xref: /openbmc/u-boot/include/configs/axs10x.h (revision 6efb6133)
1 /*
2  * Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_AXS10X_H_
8 #define _CONFIG_AXS10X_H_
9 
10 #include <linux/sizes.h>
11 /*
12  *  CPU configuration
13  */
14 #define ARC_FPGA_PERIPHERAL_BASE	0xE0000000
15 #define ARC_APB_PERIPHERAL_BASE		0xF0000000
16 #define ARC_DWMMC_BASE			(ARC_FPGA_PERIPHERAL_BASE + 0x15000)
17 #define ARC_DWGMAC_BASE			(ARC_FPGA_PERIPHERAL_BASE + 0x18000)
18 
19 /*
20  * Memory configuration
21  */
22 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
23 
24 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
25 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
26 #define CONFIG_SYS_SDRAM_SIZE		SZ_512M
27 
28 #define CONFIG_SYS_INIT_SP_ADDR		\
29 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
30 
31 #define CONFIG_SYS_MALLOC_LEN		SZ_2M
32 #define CONFIG_SYS_BOOTM_LEN		SZ_32M
33 #define CONFIG_SYS_LOAD_ADDR		0x82000000
34 
35 /*
36  * This board might be of different versions so handle it
37  */
38 #define CONFIG_BOARD_TYPES
39 
40 /*
41  * NAND Flash configuration
42  */
43 #define CONFIG_SYS_NAND_BASE		(ARC_FPGA_PERIPHERAL_BASE + 0x16000)
44 #define CONFIG_SYS_MAX_NAND_DEVICE	1
45 
46 /*
47  * UART configuration
48  */
49 #define CONFIG_DW_SERIAL
50 #define CONFIG_SYS_NS16550_SERIAL
51 #define CONFIG_SYS_NS16550_CLK		33333333
52 #define CONFIG_SYS_NS16550_MEM32
53 
54 /*
55  * Ethernet PHY configuration
56  */
57 #define CONFIG_MII
58 #define CONFIG_PHY_GIGE
59 
60 /*
61  * USB 1.1 configuration
62  */
63 #define CONFIG_USB_OHCI_NEW
64 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
65 
66 /*
67  * Commands still not supported in Kconfig
68  */
69 #define CONFIG_CMD_NAND
70 
71 #define CONFIG_AUTO_COMPLETE
72 #define CONFIG_SYS_MAXARGS		16
73 #define CONFIG_CMDLINE_EDITING
74 
75 /*
76  * Environment settings
77  */
78 #define CONFIG_ENV_SIZE			SZ_16K
79 #define FAT_ENV_INTERFACE		"mmc"
80 #define FAT_ENV_DEVICE_AND_PART		"0:1"
81 #define FAT_ENV_FILE			"uboot.env"
82 #define CONFIG_FAT_WRITE
83 
84 /*
85  * Environment configuration
86  */
87 #define CONFIG_BOOTFILE			"uImage"
88 #define CONFIG_BOOTARGS			"console=ttyS3,115200n8"
89 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
90 
91 /*
92  * Console configuration
93  */
94 #define CONFIG_SYS_LONGHELP
95 #define CONFIG_SYS_CBSIZE		SZ_256
96 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
97 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
98 						sizeof(CONFIG_SYS_PROMPT) + 16)
99 
100 /*
101  * Misc utility configuration
102  */
103 #define CONFIG_BOUNCE_BUFFER
104 
105 #endif /* _CONFIG_AXS10X_H_ */
106