1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2012 Atmel Corporation
4  *
5  * Configuation settings for the AT91SAM9X5EK board.
6  */
7 
8 #ifndef __CONFIG_H__
9 #define __CONFIG_H__
10 
11 /* ARM asynchronous clock */
12 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
13 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
14 
15 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
16 #define CONFIG_SETUP_MEMORY_TAGS
17 #define CONFIG_INITRD_TAG
18 #define CONFIG_SKIP_LOWLEVEL_INIT
19 
20 /* general purpose I/O */
21 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
22 
23 /*
24  * BOOTP options
25  */
26 #define CONFIG_BOOTP_BOOTFILESIZE
27 
28 /*
29  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
30  * NB: in this case, USB 1.1 devices won't be recognized.
31  */
32 
33 /* SDRAM */
34 #define CONFIG_SYS_SDRAM_BASE		0x20000000
35 #define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
36 
37 #define CONFIG_SYS_INIT_SP_ADDR \
38 	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
39 
40 /* DataFlash */
41 #ifdef CONFIG_CMD_SF
42 #define CONFIG_SF_DEFAULT_SPEED		30000000
43 #endif
44 
45 /* NAND flash */
46 #ifdef CONFIG_CMD_NAND
47 #define CONFIG_SYS_MAX_NAND_DEVICE	1
48 #define CONFIG_SYS_NAND_BASE		0x40000000
49 #define CONFIG_SYS_NAND_DBW_8		1
50 /* our ALE is AD21 */
51 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
52 /* our CLE is AD22 */
53 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
54 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
55 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
56 #endif
57 
58 /* PMECC & PMERRLOC */
59 #define CONFIG_ATMEL_NAND_HWECC		1
60 #define CONFIG_ATMEL_NAND_HW_PMECC	1
61 #define CONFIG_PMECC_CAP		2
62 #define CONFIG_PMECC_SECTOR_SIZE	512
63 
64 /* USB */
65 #ifdef CONFIG_CMD_USB
66 #ifndef CONFIG_USB_EHCI_HCD
67 #define CONFIG_USB_ATMEL
68 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
69 #define CONFIG_USB_OHCI_NEW
70 #define CONFIG_SYS_USB_OHCI_CPU_INIT
71 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
72 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9x5"
73 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
74 #endif
75 #endif
76 
77 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
78 
79 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
80 #define CONFIG_SYS_MEMTEST_END		0x26e00000
81 
82 #ifdef CONFIG_NAND_BOOT
83 /* bootstrap + u-boot + env + linux in nandflash */
84 #define CONFIG_ENV_OFFSET		0x140000
85 #define CONFIG_ENV_OFFSET_REDUND	0x100000
86 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
87 #define CONFIG_BOOTCOMMAND	"nand read " \
88 				"0x22000000 0x200000 0x300000; " \
89 				"bootm 0x22000000"
90 #elif defined(CONFIG_SPI_BOOT)
91 /* bootstrap + u-boot + env + linux in spi flash */
92 #define CONFIG_ENV_OFFSET	0x5000
93 #define CONFIG_ENV_SIZE		0x3000
94 #define CONFIG_ENV_SECT_SIZE	0x1000
95 #define CONFIG_ENV_SPI_MAX_HZ	30000000
96 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
97 				"sf read 0x22000000 0x100000 0x300000; " \
98 				"bootm 0x22000000"
99 #elif defined(CONFIG_SYS_USE_DATAFLASH)
100 /* bootstrap + u-boot + env + linux in data flash */
101 #define CONFIG_ENV_OFFSET	0x4200
102 #define CONFIG_ENV_SIZE		0x4200
103 #define CONFIG_ENV_SECT_SIZE	0x210
104 #define CONFIG_ENV_SPI_MAX_HZ	30000000
105 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
106 				"sf read 0x22000000 0x84000 0x294000; " \
107 				"bootm 0x22000000"
108 #else /* CONFIG_SD_BOOT */
109 /* bootstrap + u-boot + env + linux in mmc */
110 #define CONFIG_ENV_SIZE		0x4000
111 #endif
112 
113 /*
114  * Size of malloc() pool
115  */
116 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
117 
118 /* SPL */
119 #define CONFIG_SPL_TEXT_BASE		0x300000
120 #define CONFIG_SPL_MAX_SIZE		0x6000
121 #define CONFIG_SPL_STACK		0x308000
122 
123 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
124 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
125 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
126 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
127 
128 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
129 
130 #define CONFIG_SYS_MASTER_CLOCK		132096000
131 #define CONFIG_SYS_AT91_PLLA		0x20c73f03
132 #define CONFIG_SYS_MCKR			0x1301
133 #define CONFIG_SYS_MCKR_CSS		0x1302
134 
135 #ifdef CONFIG_SD_BOOT
136 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
137 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
138 
139 #elif CONFIG_SPI_BOOT
140 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
141 
142 #elif CONFIG_NAND_BOOT
143 #define CONFIG_SPL_NAND_DRIVERS
144 #define CONFIG_SPL_NAND_BASE
145 #endif
146 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
147 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
148 #define CONFIG_SYS_NAND_PAGE_SIZE	0x800
149 #define CONFIG_SYS_NAND_PAGE_COUNT	64
150 #define CONFIG_SYS_NAND_OOBSIZE		64
151 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
152 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
153 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
154 
155 #endif
156