1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9RLEK board. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include <asm/hardware.h> 15 16 #define CONFIG_SYS_TEXT_BASE 0x21F00000 17 18 /* ARM asynchronous clock */ 19 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 20 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */ 21 22 #define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */ 23 24 #define CONFIG_ARCH_CPU_INIT 25 #define CONFIG_SKIP_LOWLEVEL_INIT 26 #define CONFIG_BOARD_EARLY_INIT_F 27 28 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 29 #define CONFIG_SETUP_MEMORY_TAGS 1 30 #define CONFIG_INITRD_TAG 1 31 32 #define CONFIG_ATMEL_LEGACY 33 #define CONFIG_AT91_GPIO 1 34 #define CONFIG_AT91_GPIO_PULLUP 1 35 36 /* 37 * Hardware drivers 38 */ 39 40 /* serial console */ 41 #define CONFIG_ATMEL_USART 42 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 43 #define CONFIG_USART_ID ATMEL_ID_SYS 44 #define CONFIG_BAUDRATE 115200 45 46 /* LCD */ 47 #define LCD_BPP LCD_COLOR8 48 #define CONFIG_LCD_LOGO 1 49 #undef LCD_TEST_PATTERN 50 #define CONFIG_LCD_INFO 1 51 #define CONFIG_LCD_INFO_BELOW_LOGO 1 52 #define CONFIG_SYS_WHITE_ON_BLACK 1 53 #define CONFIG_ATMEL_LCD 1 54 #define CONFIG_ATMEL_LCD_RGB565 1 55 /* Let board_init_f handle the framebuffer allocation */ 56 #undef CONFIG_FB_ADDR 57 58 /* LED */ 59 #define CONFIG_AT91_LED 60 #define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */ 61 #define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */ 62 #define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */ 63 64 65 /* 66 * Command line configuration. 67 */ 68 69 #define CONFIG_CMD_NAND 1 70 71 /* SDRAM */ 72 #define CONFIG_NR_DRAM_BANKS 1 73 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 74 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 75 76 #define CONFIG_SYS_INIT_SP_ADDR \ 77 (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) 78 79 /* DataFlash */ 80 #define CONFIG_ATMEL_DATAFLASH_SPI 81 #define CONFIG_HAS_DATAFLASH 1 82 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 83 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 84 #define AT91_SPI_CLK 15000000 85 #define DATAFLASH_TCSS (0x1a << 16) 86 #define DATAFLASH_TCHS (0x1 << 24) 87 88 /* NOR flash - not present */ 89 #define CONFIG_SYS_NO_FLASH 1 90 91 /* NAND flash */ 92 #ifdef CONFIG_CMD_NAND 93 #define CONFIG_NAND_ATMEL 94 #define CONFIG_SYS_MAX_NAND_DEVICE 1 95 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 96 #define CONFIG_SYS_NAND_DBW_8 1 97 /* our ALE is AD21 */ 98 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 99 /* our CLE is AD22 */ 100 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 101 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6 102 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17 103 104 #endif 105 106 /* MMC */ 107 108 #ifdef CONFIG_CMD_MMC 109 #define CONFIG_MMC 110 #define CONFIG_GENERIC_MMC 111 #define CONFIG_GENERIC_ATMEL_MCI 112 #define CONFIG_DOS_PARTITION 113 #endif 114 115 /* Ethernet - not present */ 116 117 /* USB - not supported */ 118 119 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 120 121 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 122 #define CONFIG_SYS_MEMTEST_END 0x23e00000 123 124 #ifdef CONFIG_SYS_USE_DATAFLASH 125 126 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 127 #define CONFIG_ENV_IS_IN_DATAFLASH 1 128 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) 129 #define CONFIG_ENV_OFFSET 0x4200 130 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) 131 #define CONFIG_ENV_SIZE 0x4200 132 #define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm" 133 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 134 "root=/dev/mtdblock0 " \ 135 "mtdparts=atmel_nand:-(root) "\ 136 "rw rootfstype=jffs2" 137 138 #elif CONFIG_SYS_USE_NANDFLASH 139 140 /* bootstrap + u-boot + env + linux in nandflash */ 141 #define CONFIG_ENV_IS_IN_NAND 1 142 #define CONFIG_ENV_OFFSET 0xc0000 143 #define CONFIG_ENV_OFFSET_REDUND 0x100000 144 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 145 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x600000; " \ 146 "nand read 0x21000000 0x180000 0x80000; " \ 147 "bootz 0x22000000 - 0x21000000" 148 #define CONFIG_BOOTARGS \ 149 "console=ttyS0,115200 earlyprintk " \ 150 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 151 "256K(env),256k(env_redundent),256k(spare)," \ 152 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 153 "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" 154 155 #else /* CONFIG_SYS_USE_MMC */ 156 157 /* bootstrap + u-boot + env + linux in mmc */ 158 #define CONFIG_ENV_IS_IN_FAT 159 #define CONFIG_FAT_WRITE 160 #define FAT_ENV_INTERFACE "mmc" 161 #define FAT_ENV_FILE "uboot.env" 162 #define FAT_ENV_DEVICE_AND_PART "0" 163 #define CONFIG_ENV_SIZE 0x4000 164 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \ 165 "fatload mmc 0:1 0x22000000 zImage; " \ 166 "bootz 0x22000000 - 0x21000000" 167 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 168 "mtdparts=atmel_nand:" \ 169 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ 170 "root=/dev/mmcblk0p2 rw rootwait" 171 #endif 172 173 #define CONFIG_SYS_CBSIZE 256 174 #define CONFIG_SYS_MAXARGS 16 175 #define CONFIG_SYS_LONGHELP 1 176 #define CONFIG_CMDLINE_EDITING 1 177 #define CONFIG_AUTO_COMPLETE 178 179 /* 180 * Size of malloc() pool 181 */ 182 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 183 184 #endif 185