1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian@popies.net>
4  * Lead Tech Design <www.leadtechdesign.com>
5  *
6  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13 
14 #include <asm/hardware.h>
15 
16 #define CONFIG_SYS_TEXT_BASE		0x73f00000
17 
18 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
19 
20 /* ARM asynchronous clock */
21 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
22 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
23 
24 #define CONFIG_AT91SAM9M10G45EK
25 
26 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
27 #define CONFIG_SETUP_MEMORY_TAGS
28 #define CONFIG_INITRD_TAG
29 #define CONFIG_SKIP_LOWLEVEL_INIT
30 
31 /* general purpose I/O */
32 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
33 
34 /* LCD */
35 #define LCD_BPP				LCD_COLOR8
36 #define CONFIG_LCD_LOGO
37 #undef LCD_TEST_PATTERN
38 #define CONFIG_LCD_INFO
39 #define CONFIG_LCD_INFO_BELOW_LOGO
40 #define CONFIG_ATMEL_LCD
41 #define CONFIG_ATMEL_LCD_RGB565
42 /* board specific(not enough SRAM) */
43 #define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000
44 
45 /*
46  * BOOTP options
47  */
48 #define CONFIG_BOOTP_BOOTFILESIZE
49 #define CONFIG_BOOTP_BOOTPATH
50 #define CONFIG_BOOTP_GATEWAY
51 #define CONFIG_BOOTP_HOSTNAME
52 
53 /* SDRAM */
54 #define CONFIG_NR_DRAM_BANKS		1
55 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
56 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
57 
58 #define CONFIG_SYS_INIT_SP_ADDR \
59 	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
60 
61 /* NAND flash */
62 #ifdef CONFIG_CMD_NAND
63 #define CONFIG_NAND_ATMEL
64 #define CONFIG_SYS_MAX_NAND_DEVICE		1
65 #define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
66 #define CONFIG_SYS_NAND_DBW_8
67 /* our ALE is AD21 */
68 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
69 /* our CLE is AD22 */
70 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
71 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
72 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
73 
74 #endif
75 
76 /* Ethernet */
77 #define CONFIG_RESET_PHY_R
78 #define CONFIG_AT91_WANTS_COMMON_PHY
79 
80 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
81 
82 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
83 #define CONFIG_SYS_MEMTEST_END		0x23e00000
84 
85 #ifdef CONFIG_SYS_USE_NANDFLASH
86 /* bootstrap + u-boot + env in nandflash */
87 #define CONFIG_ENV_OFFSET		0x120000
88 #define CONFIG_ENV_OFFSET_REDUND	0x100000
89 #define CONFIG_ENV_SIZE			0x20000
90 
91 #define CONFIG_BOOTCOMMAND						\
92 	"nand read 0x70000000 0x200000 0x300000;"			\
93 	"bootm 0x70000000"
94 #elif CONFIG_SYS_USE_MMC
95 /* bootstrap + u-boot + env + linux in mmc */
96 #define CONFIG_ENV_SIZE		0x4000
97 
98 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
99 				"fatload mmc 0:1 0x72000000 zImage; " \
100 				"bootz 0x72000000 - 0x71000000"
101 #endif
102 
103 #define CONFIG_SYS_LONGHELP
104 #define CONFIG_CMDLINE_EDITING
105 #define CONFIG_AUTO_COMPLETE
106 
107 /*
108  * Size of malloc() pool
109  */
110 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
111 
112 /* Defines for SPL */
113 #define CONFIG_SPL_FRAMEWORK
114 #define CONFIG_SPL_TEXT_BASE		0x300000
115 #define CONFIG_SPL_MAX_SIZE		0x010000
116 #define CONFIG_SPL_STACK		0x310000
117 
118 #define CONFIG_SYS_MONITOR_LEN		0x80000
119 
120 #ifdef CONFIG_SYS_USE_MMC
121 
122 #define CONFIG_SPL_BSS_START_ADDR	0x70000000
123 #define CONFIG_SPL_BSS_MAX_SIZE		0x00080000
124 #define CONFIG_SYS_SPL_MALLOC_START	0x70080000
125 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
126 
127 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
128 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
129 
130 #elif CONFIG_SYS_USE_NANDFLASH
131 #define CONFIG_SPL_NAND_DRIVERS
132 #define CONFIG_SPL_NAND_BASE
133 #define CONFIG_SPL_NAND_ECC
134 #define CONFIG_SPL_NAND_SOFTECC
135 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
136 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
137 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
138 
139 #define CONFIG_SYS_NAND_PAGE_SIZE	0x800
140 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
141 #define CONFIG_SYS_NAND_PAGE_COUNT	64
142 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
143 #define CONFIG_SYS_NAND_ECCSIZE		256
144 #define CONFIG_SYS_NAND_ECCBYTES	3
145 #define CONFIG_SYS_NAND_OOBSIZE		64
146 #define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
147 					  48, 49, 50, 51, 52, 53, 54, 55, \
148 					  56, 57, 58, 59, 60, 61, 62, 63, }
149 #endif
150 
151 #define CONFIG_SPL_ATMEL_SIZE
152 #define CONFIG_SYS_MASTER_CLOCK		132096000
153 #define CONFIG_SYS_AT91_PLLA		0x20c73f03
154 #define CONFIG_SYS_MCKR			0x1301
155 #define CONFIG_SYS_MCKR_CSS		0x1302
156 
157 #endif
158