1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include <asm/hardware.h> 15 16 #define CONFIG_SYS_TEXT_BASE 0x73f00000 17 18 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 19 20 /* ARM asynchronous clock */ 21 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 22 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 23 24 #define CONFIG_AT91SAM9M10G45EK 25 26 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 27 #define CONFIG_SETUP_MEMORY_TAGS 28 #define CONFIG_INITRD_TAG 29 #define CONFIG_SKIP_LOWLEVEL_INIT 30 #define CONFIG_BOARD_EARLY_INIT_F 31 #define CONFIG_DISPLAY_CPUINFO 32 33 /* general purpose I/O */ 34 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 35 #define CONFIG_AT91_GPIO 36 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 37 38 /* serial console */ 39 #define CONFIG_ATMEL_USART 40 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 41 #define CONFIG_USART_ID ATMEL_ID_SYS 42 43 /* LCD */ 44 #define CONFIG_LCD 45 #define LCD_BPP LCD_COLOR8 46 #define CONFIG_LCD_LOGO 47 #undef LCD_TEST_PATTERN 48 #define CONFIG_LCD_INFO 49 #define CONFIG_LCD_INFO_BELOW_LOGO 50 #define CONFIG_SYS_WHITE_ON_BLACK 51 #define CONFIG_ATMEL_LCD 52 #define CONFIG_ATMEL_LCD_RGB565 53 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 54 /* board specific(not enough SRAM) */ 55 #define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 56 57 /* LED */ 58 #define CONFIG_AT91_LED 59 #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ 60 #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ 61 62 #define CONFIG_BOOTDELAY 3 63 64 /* 65 * BOOTP options 66 */ 67 #define CONFIG_BOOTP_BOOTFILESIZE 68 #define CONFIG_BOOTP_BOOTPATH 69 #define CONFIG_BOOTP_GATEWAY 70 #define CONFIG_BOOTP_HOSTNAME 71 72 /* 73 * Command line configuration. 74 */ 75 76 /* No NOR flash */ 77 #define CONFIG_SYS_NO_FLASH 78 #define CONFIG_CMD_NAND 79 80 /* SDRAM */ 81 #define CONFIG_NR_DRAM_BANKS 1 82 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 83 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 84 85 #define CONFIG_SYS_INIT_SP_ADDR \ 86 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 87 88 /* NAND flash */ 89 #ifdef CONFIG_CMD_NAND 90 #define CONFIG_NAND_ATMEL 91 #define CONFIG_SYS_MAX_NAND_DEVICE 1 92 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 93 #define CONFIG_SYS_NAND_DBW_8 94 /* our ALE is AD21 */ 95 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 96 /* our CLE is AD22 */ 97 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 98 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 99 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 100 101 #endif 102 103 /* MMC */ 104 105 #ifdef CONFIG_CMD_MMC 106 #define CONFIG_MMC 107 #define CONFIG_GENERIC_MMC 108 #define CONFIG_GENERIC_ATMEL_MCI 109 #endif 110 111 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) 112 #define CONFIG_DOS_PARTITION 113 #endif 114 115 /* Ethernet */ 116 #define CONFIG_MACB 117 #define CONFIG_RMII 118 #define CONFIG_NET_RETRY_COUNT 20 119 #define CONFIG_RESET_PHY_R 120 #define CONFIG_AT91_WANTS_COMMON_PHY 121 122 /* USB */ 123 #define CONFIG_USB_EHCI 124 #define CONFIG_USB_EHCI_ATMEL 125 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 126 #define CONFIG_USB_STORAGE 127 128 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 129 130 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 131 #define CONFIG_SYS_MEMTEST_END 0x23e00000 132 133 #ifdef CONFIG_SYS_USE_NANDFLASH 134 /* bootstrap + u-boot + env in nandflash */ 135 #define CONFIG_ENV_IS_IN_NAND 136 #define CONFIG_ENV_OFFSET 0xc0000 137 #define CONFIG_ENV_OFFSET_REDUND 0x100000 138 #define CONFIG_ENV_SIZE 0x20000 139 140 #define CONFIG_BOOTCOMMAND \ 141 "nand read 0x70000000 0x200000 0x300000;" \ 142 "bootm 0x70000000" 143 #define CONFIG_BOOTARGS \ 144 "console=ttyS0,115200 earlyprintk " \ 145 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 146 "256k(env),256k(env_redundant),256k(spare)," \ 147 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 148 "root=/dev/mtdblock7 rw rootfstype=jffs2" 149 #elif CONFIG_SYS_USE_MMC 150 /* bootstrap + u-boot + env + linux in mmc */ 151 #define FAT_ENV_INTERFACE "mmc" 152 /* 153 * We don't specify the part number, if device 0 has partition table, it means 154 * the first partition; it no partition table, then take whole device as a 155 * FAT file system. 156 */ 157 #define FAT_ENV_DEVICE_AND_PART "0" 158 #define FAT_ENV_FILE "uboot.env" 159 #define CONFIG_ENV_IS_IN_FAT 160 #define CONFIG_FAT_WRITE 161 #define CONFIG_ENV_SIZE 0x4000 162 163 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 164 "mtdparts=atmel_nand:" \ 165 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ 166 "root=/dev/mmcblk0p2 rw rootwait" 167 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ 168 "fatload mmc 0:1 0x72000000 zImage; " \ 169 "bootz 0x72000000 - 0x71000000" 170 #endif 171 172 #define CONFIG_BAUDRATE 115200 173 174 #define CONFIG_SYS_CBSIZE 256 175 #define CONFIG_SYS_MAXARGS 16 176 #define CONFIG_SYS_LONGHELP 177 #define CONFIG_CMDLINE_EDITING 178 #define CONFIG_AUTO_COMPLETE 179 180 /* 181 * Size of malloc() pool 182 */ 183 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 184 185 /* Defines for SPL */ 186 #define CONFIG_SPL_FRAMEWORK 187 #define CONFIG_SPL_TEXT_BASE 0x300000 188 #define CONFIG_SPL_MAX_SIZE 0x010000 189 #define CONFIG_SPL_STACK 0x310000 190 191 #define CONFIG_SPL_LIBCOMMON_SUPPORT 192 #define CONFIG_SPL_LIBGENERIC_SUPPORT 193 #define CONFIG_SPL_SERIAL_SUPPORT 194 #define CONFIG_SPL_GPIO_SUPPORT 195 196 #define CONFIG_SYS_MONITOR_LEN 0x80000 197 198 #ifdef CONFIG_SYS_USE_MMC 199 200 #define CONFIG_SPL_BSS_START_ADDR 0x70000000 201 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 202 #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 203 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 204 205 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds 206 #define CONFIG_SPL_MMC_SUPPORT 207 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 208 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 209 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 210 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 211 #define CONFIG_SPL_FAT_SUPPORT 212 #define CONFIG_SPL_LIBDISK_SUPPORT 213 214 #elif CONFIG_SYS_USE_NANDFLASH 215 #define CONFIG_SPL_NAND_SUPPORT 216 #define CONFIG_SPL_NAND_DRIVERS 217 #define CONFIG_SPL_NAND_BASE 218 #define CONFIG_SPL_NAND_ECC 219 #define CONFIG_SPL_NAND_SOFTECC 220 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 221 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 222 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 223 224 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 225 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 226 #define CONFIG_SYS_NAND_PAGE_COUNT 64 227 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 228 #define CONFIG_SYS_NAND_ECCSIZE 256 229 #define CONFIG_SYS_NAND_ECCBYTES 3 230 #define CONFIG_SYS_NAND_OOBSIZE 64 231 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 232 48, 49, 50, 51, 52, 53, 54, 55, \ 233 56, 57, 58, 59, 60, 61, 62, 63, } 234 #endif 235 236 #define CONFIG_SPL_ATMEL_SIZE 237 #define CONFIG_SYS_MASTER_CLOCK 132096000 238 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 239 #define CONFIG_SYS_MCKR 0x1301 240 #define CONFIG_SYS_MCKR_CSS 0x1302 241 242 #endif 243